Shifting HT/LT Poles at various locations in connection with the widening of Amaravila- Karakkonam Road under Electrical Section Udiyankulangara

Fitting one set AB switch and giving connection

Dismantling DTR meter with Box from the existing channel/Angle crossarm on DPand control cables structure, including dismantling 3 no of CTS

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling 2 Line spacer from existing OH Line

Dismantling 3 line spacer on the existing LT OH line

Labour charges for fitting of one number knee bracing on the existing pole including conveyance of materials

Loading HT 4 legged pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT 4 legged pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit

Providing Stay for LT poles incl. digging & back filling pit.

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Stringing one km LT Sph 2 wire line (Rabbit) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT Sph 3 wire line (Rabbit for Ph&N, Weasel for St.main) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT Addl conductor (Rabbit) where fitting of crossarmor realigning existing conductoris not required, incl. fitting insulators, removing touchings and conveyance of materials.

Erecting one LT PSC Pole in position incl. digging & back filling pit

Providing Strut using LT PSC pole incl. digging & back filling pit.

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one km 11kV line (3 conductors), crossarm, insulators, disc, rolling the conductor and stacking.

Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Brick work in cement mortar for superstructure as per the direction of departmental staff.

Painting on transformer fencing with synthetic enamel paint of approved brand and manufacture of required colour (two or more coats) after a coat of approved steel/iron primer including cost of paint/primer etc (Rate per Sqm of fencing)

Dismantling transformer station in DP structure excluding the rate of dismantling earthing

Erecting one 100kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 250kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement 12 mm cement plaster ( including cost of materials)

Constructing Transformer plinth inclusive of cost of all materials (as per specification).

Dismantling one Transformer (upto and incl. 160kVA) from existing structure to ground.

Dismantling one Transformer (above 160kVA) from existing plinth to ground.

Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Installing one DTR meter with box on existing channel/angle cross-arm on DP structure and giving connections including conveyance

Providing/Inserting 2 line spacer on the existing LT OH line.

Providing/Inserting 3 line spacer on the existing LT OH line.