Estimate for Construction of boundary wall and renovation of canal Rest House Bhattian (Khanna) at RD 79155 of Khanna Disty

Amount

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base.

Stripping and stacking slate or tiles of a roof

Scraping of White wash and colour wash & snowcem

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade.

Preparation of plastered or concrete surfaces for painting (including sand papering the surface using ready mixed cement based wall putty by applying two coats to get required finish.

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Cement concrete 1:2:4 With stone blast or shingle mixing by mechanical means using concrete mixer volumetric type

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ) a) Size 600x600 mm .

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Black Granite stone tiles 15 mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours,shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Cement concrete 1:8:16 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Cement concrete 1:3:6 With stone blast or shingle mixing by mechanical means using concrete mixer volumetric type

Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with anticorrosive bitumastic paint to give an even shade.

Scraping (d) mud plaster

Washing Concrete surface, scrubbing with brushes including preparing and laying slurry.

Nicking of cement concrete surface ( Over 28 days old including prepration and laying slurry)

Terracing consist of tiles 22.86x11.43x3.83cm laid over 25mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make ( to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including rack bolt screw pair 115mm long complete in all respect. Size 630 mm x 450 mm x 830mm

Providing & fixing in position best Indian make PVC flexible tube connection of approved make ( to the approval of Engineer-in-charge) complete in all respect. PVC tube connection of size 15 mm x 375 mm withPTMT nut

Providing & Fixing in postion 15 mm i/d bib cock of of approved make ( to the approval of Engineer-in-charge) complete in all respect. C.P. brass Bib cock long nose/long body foam flow without glange

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut

Providing & Fixing in postion stop cock / Angle valve of approved make ( to the approval of Engineer-in-charge)complete in all respect. C.P.brass 15mm Concealed stop cock with flange.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass ( of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S studs on top complete in all respect (as required by the Engineer-in- Charge). Size 600mmx450mm

Providing & Fixing in position C.P. Brass flange of approved make ( to the approval of Engineer-in-charge) under various fixtures complete in all respects.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make ( to the approval of Engineer-in-charge) with various fixtures complete in all respects. 1) C.P brass extension piece, 25mm long to 50mm long

Providing and fixing in position S.S.grating with frame of approved make ( to the approval of Engineer-in-charge)complete in all respect.

Providing & fixing in position in C.P. / Aluminiumk khunti of approved make ( to the approval of engineer-in-charge) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.:- c.p. brass khunti with 4 pegs

Dismantling sanitary fixtures such as European/Indian/ Orrisa China ware cistern ,Wash hand basin,UrinalPot,Sinks and CP fittings and disposal of dismantled meterial within a distance of 100 mtr. complete in all respect as required by Engineer-in-charge.:- (B)European W.C

Dismantling sanitary fixtures such as European/Indian/ Orrisa China ware cistern ,Wash hand basin,UrinalPot,Sinks and CP fittings and disposal of dismantled meterial within a distance of 100 mtr. complete in all respect as required by Engineer-in-charge.:- (C)wash hand basin /Urinal Pot /PVC/China ware cistern.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns(minimum), including factory painted after bending.) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T,bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

THE GILL CO-OPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED

THE ROYAL PATIALA CO-OP L & C SOCIETY LIMITED

NARESH KUMAR DUGGAL