-823/2025-26 Installation of boards for corporation buildings and handed over buildings

Amount

Installation of board

13.71:Lettering with black Japan pint of approved brand and manufacture

OD372065/2025-2026:Acrylic letter: Providing and fixing Acrylic letter as per design intend .Letter to be finished with 35 mm height and 3 mm thick imported A grade Acrylic letter to be fixed on existing ACP Panel using necessary fittings, As per instruction of Engineer.

OD341069/2025-2026:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB-2 nos confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 40 cm x 40 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc

OD337445/2025-2026: Providing and fixing black colour self adhesive type Acrylic malayalam letters of 80mm in size on wall mount acrylic glass sheet for naming the building all complete as per engineer in charge

OD337446/2025-2026:Providing and fixing black colour self adhesive type Acrylic malayalam letters of 150mm in size on wall mount acrylic glass sheet for naming the building all complete as per engineer in charge

OD340847/2025-2026:Supplying and fixing 3D titanium brass letters of various size to the Aluminum composite panel including cost cost conveyance labor charges etc. complete (Excluding cost of ACP paneling)

OD341167/2025-2026:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

OD337481/2025-2026:Supplying and fixing stainless steel sign board for signages of size 5'x7' including cost of meterials and labour charges etc. complete

OD337528/2025-2026: Providing and fixing wall mount transparent acrylic glass sheet of 3 mm thick for name board all complete as per engineer in charge

OD373606/2025-2026:Providing ad fitting steel letters including all charges etc complete . Size 15cm or near

OD373629/2025-2026:Acrylic letters: Providing and fixing arcylic letter as per design intend. Letters to be finishedwith 20cm height and 20mm thick imported A grade Acrylic letter to be fixed on existing HPL panel using necessary fitings,as per instruction of engineer in charge .Including cost and conveyance charges of all materials, labour charges etc.

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

VIJEESH KUMAR V K (BID ID -2431582)

Bidder Name

SAJITH KUMAR PP

VIJEESH KUMAR V K