Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.6 L+₹969.44 (0.17%)Rejected-Finance | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | S P thomas L1 | K O POLY L2 |
|---|---|---|---|---|---|
| 1.00maintenance | |||||
| 1.00 | OD486746/2024-2025:Supplying and installing ready made RCC OVERFLOW TANK including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge | 2 | each | 5,476.64 ₹10,953.28 Lowest | 5,486.11 ₹10,972.22 |
| 1.00 | OD486747/2024-2025:Supplying and installing ready made RCC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge | 1 | each | 15,590.63 ₹15,590.63 Lowest | 15,617.61 ₹15,617.61 |
| 1.00 | OD486748/2024-2025:Supplying and fixing partition work with fire resistant PVC laminated sheet 4mm thick including cost of necessary fittings, labour charges etc. complete | 98.42 | sqm | 1,330.77 ₹1,30,979.71 Lowest | 1,333.07 ₹1,31,206.08 |
| 1.00 | 50.18.8.8.2:Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2 | 39.92 | metre | 638.41 ₹25,485.33 Lowest | 639.51 ₹25,529.24 |
| 1.00 | 17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
Kitchen sink without drain board470x420 mm bowl depth 178 mm | 1 | each | 3,396.66 ₹3,396.66 Lowest | 3,402.54 ₹3,402.54 |
| 1.01 | 17.25.5:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 450x300 mm | 1 | each | 755.02 ₹755.02 Lowest | 756.32 ₹756.32 |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 28.11 | kg | 743.75 ₹20,910.53 Lowest | 745.04 ₹20,946.8 |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 493.81 | kg | 589.72 ₹2,91,209.63 Lowest | 590.75 ₹2,91,718.26 |
| 1.01 | OD486812/2024-2025:Providing and fixing eave board false ceiling tiles at all heights of size
600x600mm of approved texture, design and pattern suspended on interlocking T-Grid of hot
dipped all
round galvanized iron section of 0.33 mm thick (galvanized @120 gsm )
comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size
15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32
mm of length 600 mm to form grid module of size 600x600 mm suspended
from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm
long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded
hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2
mm, spaced at 1200 mm centre to centre along main ?T?. The system should
rest on periphery walls /partitions with the help of GI perimeter wall angle of
size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with
help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.
screws. The exposed bottom portion of all T-sections used in false ceiling
support system shall be pre-painted with polyester baked paint, for all heights.
The work shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge. | 31 | sqm | 1,561.07 ₹48,393.17 Lowest | 1,563.77 ₹48,476.87 |
Tender Value
₹5.1 L
EMD Value
₹12,701
Closing Date
25 Mar 2025, 4:00 pmClosed
ASSISTANT ENGINEER
O/o the Assistant Engineer, LSGD section, Parakkadavu GP Ernakulam.
CONSTRUCTION OF BUILDING FOR SANITARY TRAINING PROGRAMME CENTRE IN FHC BALANCE WORK.- WARD5
2025_LSGD_751673_1
109/AE/LSGD/PKDV/2024-25
Open Tender
Civil Works - Buildings
Item Rate
180 days
PARAKKADAVU
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,120
Yes
₹12,701
Yes
26 Sept 2025
17 Mar 2025
27 Mar 2025
17 Mar 2025
25 Mar 2025
17 Mar 2025
Amount
maintenance
OD486746/2024-2025:Supplying and installing ready made RCC OVERFLOW TANK including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge
OD486747/2024-2025:Supplying and installing ready made RCC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge
OD486748/2024-2025:Supplying and fixing partition work with fire resistant PVC laminated sheet 4mm thick including cost of necessary fittings, labour charges etc. complete
50.18.8.8.2:Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2
17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board470x420 mm bowl depth 178 mm
17.25.5:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 450x300 mm
10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
OD486812/2024-2025:Providing and fixing eave board false ceiling tiles at all heights of size 600x600mm of approved texture, design and pattern suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ?T?. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
K O POLY (BID ID -2169610)
Bidder Name
S P thomas
K O POLY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1218249.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .