Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC D NO 38 39 86 3 4 SAIKRUPA RESIDENCY 104 AREA BAPUJI NAGAR MARRIPALEM VISAKHAPATNAM 530 007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹19.8 L+₹41,580 (2.14%)Rejected-Finance MIG 2B 65 VINAYAKA NAGAR VUDA COLONY VISAKHAPATNAM 530044 | VISAKHAPATANAM | ANDHRA PRADESH | 530044 | L2 | Rejected-Finance Being not L1 bidder | |
| 3 | L3₹20.4 L+₹1.0 L (5.31%)Rejected-Finance | L3 | Rejected-Finance Being not L1 bidder | |
| 4 | L4₹20.6 L+₹1.2 L (5.94%)Rejected-Finance D NO 9 2 1 1 VUDA QUATERS PITHAPURAM COLONY VISAKHAPATNAM PIN 530 003 | VISAKHAPATANAM | ANDHRA PRADESH | 530003 | L4 | Rejected-Finance Being not L1 bidder | |
| 5 | L5₹20.6 L+₹1.2 L (5.98%)Rejected-Finance | L5 | Rejected-Finance Being not L1 bidder |
| Sl No | Description | Qty | Unit | GVR ENGINEERING WORKS L5 | ALPHA ENGINEERING CONSTRUCTIONS L4 | VENKATESWARA ENGINEERS AND CONTRACTORS L1 | M/S CHANDRA ENGINEERS AND CONTRACTORS L8 | S.S.TRADERS L6 | SREE DURGA INFOTECH L3 | NJ ENTERPRISES L9 | PNR CONSTRUCTIONS L7 | VEEKSHITH ENTERPRISES L10 | jyothi constructions L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | S&F LED street light fitting of capacity 60 watt, 230 V, AC, outdoor type with high pressure die cast aluminum housing and heat resistant, toughened glass cover including thermal management in multiple optics complete, high efficiency electronic driver, IP-65 (minimum) protection, integrated type, SPD of capaciity 10 KV, internally prewired, with and including electrical connections and including taking down existing un-serviceable street light fittings complete all as specified and as directed.
Note:- Supply only GI Pipe bracket if required shall be measured and paid seperately under relevant item. | 5 | Each | 2,650 ₹13,250 | 3,000 ₹15,000 | 5,000 ₹25,000 | 4,920 ₹24,600 | 3,000 ₹15,000 | 3,400 ₹17,000 | 4,500 ₹22,500 | 2,450 ₹12,250 Lowest | 4,800 ₹24,000 | 3,500 ₹17,500 |
| 2.00 | All as per serial Item No. 1.00 here in before but LED street light fitting of capacity 90 W | 20 | Each | 3,450 ₹69,000 Lowest | 4,000 ₹80,000 | 6,000 ₹1,20,000 | 6,900 ₹1,38,000 | 4,000 ₹80,000 | 5,040 ₹1,00,800 | 6,500 ₹1,30,000 | 3,850 ₹77,000 | 6,900 ₹1,38,000 | 5,000 ₹1,00,000 |
| 3.00 | All as per serial Item No. 1.00 here in before but LED street light fitting of capacity 100 W | 10 | Each | 3,850 ₹38,500 Lowest | 4,300 ₹43,000 | 6,500 ₹65,000 | 7,800 ₹78,000 | 5,800 ₹58,000 | 5,400 ₹54,000 | 7,200 ₹72,000 | 4,125 ₹41,250 | 7,600 ₹76,000 | 7,500 ₹75,000 |
| 4.00 | S&F LED flood light fitting of capacity 150 watt, 230 V, AC, outdoor type, IP-65 (minimum), SPD of capaciity 10 KV, pressure die cast aluminium housing, toughened glass cover with thermal management in multiple optics, with impact and corrosion resistant complete with driver and lamp, internally prewired, with and including electrical connections and including taking down existing un-serviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and directed. | 6 | Each | 6,150 ₹36,900 | 5,500 ₹33,000 Lowest | 8,000 ₹48,000 | 8,035 ₹48,210 | 7,500 ₹45,000 | 9,700 ₹58,200 | 7,500 ₹45,000 | 6,850 ₹41,100 | 9,150 ₹54,900 | 8,500 ₹51,000 |
| 5.00 | All as per serial Item No. 4.00 here in before but LED flood light fitting of capacity 200 W | 8 | Each | 7,250 ₹58,000 Lowest | 7,500 ₹60,000 | 9,000 ₹72,000 | 10,800 ₹86,400 | 11,000 ₹88,000 | 10,600 ₹84,800 | 12,000 ₹96,000 | 7,450 ₹59,600 | 12,100 ₹96,800 | 10,000 ₹80,000 |
| 6.00 | All as per serial Item No. 4.00 here in before but LED flood light fitting of capacity 250 W | 5 | Each | 8,450 ₹42,250 | 10,500 ₹52,500 | 9,500 ₹47,500 | 11,565 ₹57,825 | 12,000 ₹60,000 | 12,400 ₹62,000 | 14,200 ₹71,000 | 8,250 ₹41,250 Lowest | 12,300 ₹61,500 | 11,000 ₹55,000 |
| 7.00 | M&L for bracket suitable for street light made out of GI pipe light grade 40 mm bore & 1.20 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer including taking down existing un-serviceable bracket complete all as specified and directed. | 5 | Each Job | 850 ₹4,250 | 600 ₹3,000 | 850 ₹4,250 | 560 ₹2,800 Lowest | 700 ₹3,500 | 900 ₹4,500 | 850 ₹4,250 | 750 ₹3,750 | 620 ₹3,100 | 700 ₹3,500 |
| 8.00 | S&F PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc. including taking down existing un-serviceable cable complete all as specified and directed. | 100 | RM | 55 ₹5,500 Lowest | 70 ₹7,000 | 65 ₹6,500 | 70 ₹7,000 | 80 ₹8,000 | 79 ₹7,900 | 75 ₹7,500 | 60 ₹6,000 | 80 ₹8,000 | 100 ₹10,000 |
| 9.00 | S&F post top lantern LED type 35 watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light, with impact and corrosion resistant complete & high efficient constant current electronic driver and lamp, polycarbonate opal diffuser, pressure die cast aluminium housing, IP-65 (minimum) including necessary electrical connection and including taking down existing un-serviceable post top lantern complete all as specified and directed. | 10 | Each | 9,985 ₹99,850 | 6,000 ₹60,000 | 9,500 ₹95,000 | 14,200 ₹1,42,000 | 4,700 ₹47,000 Lowest | 9,700 ₹97,000 | 15,200 ₹1,52,000 | 6,450 ₹64,500 | 16,300 ₹1,63,000 | 7,500 ₹75,000 |
| 10.00 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 16 Sqmm x 4 Core, laid in trenches / duct / on pole including taking down existing unserviceable cable complete all as specified and directed. | 400 | RM | 190 ₹76,000 | 200 ₹80,000 | 224 ₹89,600 | 160 ₹64,000 Lowest | 190 ₹76,000 | 180 ₹72,000 | 195 ₹78,000 | 189 ₹75,600 | 165 ₹66,000 | 190 ₹76,000 |
Tender Value
₹30.3 L
EMD Value
₹60,600
Closing Date
5 Jun 2025, 6:00 pmClosed
Garrison Engineer Utility-I Visakhapatnam
Garrison Engineer Utility-I Near Samudrika Naval Base Post Visakhapatnam -530 014
REPAIR / MAINT OF DG SET, STREET / HIGH MAST / GARDEN LIGHTS AND CERTAIN ALLIED WORKS AT INHS KALYANI UNDER AGE E/M NO-I OF GE (U-I) VISAKHAPATNAM
2025_MES_707165_1
8738/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer Utility-I Visakhapatnam
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Utility-I
₹60,600
Yes
12 Aug 2025
8 May 2025
7 Jun 2025
8 May 2025
5 Jun 2025
23 May 2025
Amount
S&F LED street light fitting of capacity 60 watt, 230 V, AC, outdoor type with high pressure die cast aluminum housing and heat resistant, toughened glass cover including thermal management in multiple optics complete, high efficiency electronic driver, IP-65 (minimum) protection, integrated type, SPD of capaciity 10 KV, internally prewired, with and including electrical connections and including taking down existing un-serviceable street light fittings complete all as specified and as directed. Note:- Supply only GI Pipe bracket if required shall be measured and paid seperately under relevant item.
All as per serial Item No. 1.00 here in before but LED street light fitting of capacity 90 W
All as per serial Item No. 1.00 here in before but LED street light fitting of capacity 100 W
S&F LED flood light fitting of capacity 150 watt, 230 V, AC, outdoor type, IP-65 (minimum), SPD of capaciity 10 KV, pressure die cast aluminium housing, toughened glass cover with thermal management in multiple optics, with impact and corrosion resistant complete with driver and lamp, internally prewired, with and including electrical connections and including taking down existing un-serviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and directed.
All as per serial Item No. 4.00 here in before but LED flood light fitting of capacity 200 W
All as per serial Item No. 4.00 here in before but LED flood light fitting of capacity 250 W
M&L for bracket suitable for street light made out of GI pipe light grade 40 mm bore & 1.20 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer including taking down existing un-serviceable bracket complete all as specified and directed.
S&F PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc. including taking down existing un-serviceable cable complete all as specified and directed.
S&F post top lantern LED type 35 watt, 230 volts AC outdoor type with decorative post top for 360 degree indirect light, with impact and corrosion resistant complete & high efficient constant current electronic driver and lamp, polycarbonate opal diffuser, pressure die cast aluminium housing, IP-65 (minimum) including necessary electrical connection and including taking down existing un-serviceable post top lantern complete all as specified and directed.
Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 16 Sqmm x 4 Core, laid in trenches / duct / on pole including taking down existing unserviceable cable complete all as specified and directed.
All as per Sl item No. 20.00 here in before but cross sectional area 25 Sqmm x 4 Core
Taking out existing un-serviceable PVC / XLPE Cable of any size in underground / passing through GI tubing / alongwith pole / on wall or in any positon, complete all as specified and as directed. Note:- Excavation and earthwork (where required) shall be measured and paid separately.
Re-laying old existing servicable UG LT XLPE / PVC electric cable with alumimium conductor, 1100 volts grade of any size, laid in trenches / fixed to wall / on pole / on roof / laid on floor including necessary connections and suitale size thimbles complete all as specified and directed. Note : (i) Excavation, earth work, brick & sand coushoning (if required) shall be measured and paid seperately under relavent item. (ii) Serviceable cable obtained from taking down shall be used for re laying.
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L sand cushioning with clean and dry crushed stone dust in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness of crushed stone dust coushioning shall only measured and paid.
Supply & laying sub class 'B', class designation 75 bricks of old size, laid over sand cushioning along alignment of cable as protection to cable in trenches including taking out old bricks complete all as specified and directed. Note : Sand cushioning will measured and paid separately.
S&F steel tubular swaged poles conforming to IS-2713, complete with cast iron base plate, finial taper plug, bolts, nuts & screws, type 410 SP-31 (9 m long) and including painting with two coat of aluminium paint over a coat of primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and 03 Nos band / strips with white synthetic enamel paint, 30 cm wide each at a distance of 30 cm from top of plinth block and numbering of poles including taking down existing un-serviceable pole complete all as specified and directed. Note:- Excavation, earth work and PCC work will be measured and paid for separately under respective items.
M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of existing concrete complete all as specified and directed.
M&L plain cement concrete (1:2:4) type B1, (using 20 mm graded crushed stone aggregate) as in copings, benching and the like etc. including necessary formwork & demolition of old concrete complete all as specified and directed.
M&L for cutting the tarmac / hard standings in road and excavating trenches across the road in size not exceeding 0.45 m wide and 0.6 m depth for laying cable / cable protection pipe including refilling earth & making good top surface of the disturbed portion with 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) / bituminous mix as per existing & matching with the surroundings including removal of rabbish off to distance not exceeding 100 m complete all as specified and directed. Note:- Unit rate quoted against this item shall deemed to include cost for necessary cement concrete work required for making good top surface.
S&F 50 mm bore dia galvanised steel tubing, medium grade, laid under road crossing, for cable protection or fixed to poles, walls or laid under floors including taking down existing un-serviceable pipe of any description. complete all as specified and directed.
Taking down existing loo in loop out Junction box, disconnecting the cable connections and re-fixing the same loo in loop out Junction box with new cable connections including providing new set of aluminium lugs / thimbles of size 10 to 35 Sqmm (as reqd) for 3.5 / 4 core existing LT cable of any type, necessary insulation with tape, clamps for fixing of cables, fittings and fixtures, nut bolts etc complete all as specified and directed.
M&L for disconnecting electrical connection of defective / burnt out UG LT cable of any size 2 to 4 core from LT Panels / main switch / DB / Junction boxe etc., excavating & taking out required length (3 to 5m) of existing cable from its loop, cleaning & cutting the defective portion of cable / old termination at end, providing new aluminium thimbles / lugs of suitable size and reconnecting the same with existing location and refilling of cable trench with existing sand and bricks complete all as directed. Note :- (i) The rate quoted shall include for necessary earth work and excavation. (ii) Serviceable sand and Bricks shall be re-used for protection.
S&F weather proof cable junction box of size not less than 250 mm x 200 mm x 100 mm with terminals, IP 66 (minimum), suitable for outdoor installation including 01 No 5/6 Amp MCB, 50 Amp rated 3 pole connector, fixing arrangement with MS flat of size 25 x 3 mm with necessary nuts, bolt and washers & taking down existing un-serviceable junction box complete all as specified and directed.
M&L preparation of old painted surface of existing 9 m long steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code, writing pole details & applying one coat of white wash on pole coping complete all as specified and directed.
Taking down defective street light fitting of any make / type / capacity from top of pole / walls / high mast at a height exceeding 7.0 m but not exc 9.0 m, at any location, for repair work, re-fixing the same after repair work including testing and commissioning complete all as specified and directed. Note:- (i) M&L for Items like ballast, lamp, ignitor, capacitors, electronic drivers, surge protection devices etc shall be measured and paid separately under relevant items. However rate quoted shall deemed to include cost of minor spares like nut bolts, circle clips, clamps etc (if reqd) (ii) Necessary T&P like ladders etc required to take the fitting down shall be arranged by the contractor. (iii) The rate quoted by the contractor shall deemed to inclusive of minor parts, nut bolts, circle clips, clamps etc., (iv) M&L for repairs to LED Panel will be measured and paid seperately.
S&F in repair electronic driver of make as per existing, suitable for 45 to 100W street light / flood light / post top lantern complete all as specified and directed. Note:-The rate quoted is not inclusive of taking down & refixing of street light fittings and the same shall be measured and paid separately under relevant item.
S & F wiring from LED panel to driver for capacity 45-100 LED fittings complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 of SSR part-I connected to earthing test point including dismantling existing old earthing complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, Main earthing lead from earth electrode to test point upto 7.5 m length, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S&F MCCB 4 pole 40-63 Amp, breaking capacity 16 kA, 415 V, Ics = 100% Icu, thermal magnetic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 ln) including necessary modification in the panel including taking down existing un-serviceable MCCB complete all as specified and as directed.
M&L for disconnecting, removing 0.75 HP to 2 HP motor 415 Volts, 50 Hz, 3 Phase, 930 RPM from high mast gear box unit and carryout necessary rewinding of the burnt core with super enameled copper wire of appropriate gauge, greasing of bearings, rotating shaft, replacing worn out nuts and bolts complete all as specified and directed by Engineer-in-Charge.
M&L for dismantling defective lantern carriage / winch from High mast of 12.5 mtr to 16 mtr height, movement, inspecting the alignment, replacement of broken / defective SS wire rope of size 6 mm 7/19 construction complete after disconnecting and dismantling the SS rope securely from the high mast alongwith replacing and fixing U-clips, fasteners, check for any short circuit / burnt wire, disconnecting and replacing the wires with 5 core 2.5 Sqmm flexible copper conductor wire from light fittings and driver unit, ERP insulated PCP/PVC sheathed trailing cable, re-fixing the light fittings and realigning the carriage and light fittings as required complete all as specified and directed by Engineer-in-Charge.
Supply & replace stain less steel wire rope of size 6 mm dia with 7/19 construction after dismantling the old damaged rope from position in High mast pole and connecting it with the motor winch and lantern carriage and doing the alignment nad balancing of the carriage to be hanging properly complete all as specified and directed by Engr-in-Charge.
S & F Automatic battery charger of 12 / 24 Volt, 0-10 Amps / 0-5 Amps charging rate with auto cut off system including taking down existing un-serviceable battery charger complete all as specified.
S&F PVC insulated 3 core multistranded sheathed cable with 2.5 Sqmm copper conductor FRLS grade including required PVC conduit to protect cable including taking down un-serviceable cable complete all as specified and directed.
S&F MCCB 4 pole 100 Amp, breaking capacity 36 kA, Ics = 100% Icu, thermal magnetic release type with adjustable overload setting (0.8-1.0 ln), adjustable short circuit setting (6-10 ln) including necessary modification in the panel & taking down existing un-serviceable MCCB complete all as specified and as directed.
S & F Display control panel (LED Board) for 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable Display control panel complete all as specified and directed.
S & F Coolant temperature sensor (coolent control safety) for 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable Coolant temperature sensor complete all as specified and directed.
S & F Fuel level indicator sensor for 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable Fuel level indicator sensor complete all as specified and directed.
S & F AMF controller assy for auto / manual operation for 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable AMF controller assy complete all as specified and directed.
S & F Control assy main generator panel any type for 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable Control assy main generator panel complete all as specified and directed.
S & F Lube oil pressure sensor adaptor (oil control safety ) 62.5 to 400 KVA DG set of make as per OEM including taking down existing un-serviceable Lube oil pressure sensor adaptor complete all as specified and directed.
S & F Stop solenoid switch 12 Volts of make as per OEM including taking down existing un-serviceable Stop solenoid switch complete all as specified and directed.
S & F Stop solenoid switch 24 Volts of make as per OEM including taking down existing un-serviceable Stop solenoid switch complete all as specified and directed.
Supply & Fill Coolant for radiators of make as per OEM complete all as specified and directed.
S & F Turbo charger for any capacity DG set of make as per OEM including taking down existing un-serviceable Turbo charger complete all as specified and directed.
Supply & Fill Engine oil multi grade 15W40 including taking down un-serviceable Engine Oil complete all as specified and directed.
S & F Automatic Voltage Regulator fit for DG set of make as per OEM including taking down existing un-serviceable Automatic Voltage Regulator complete all as specified and directed.
Calibration of FIP and fuel injector from the authorised dealer including petty replacements to make the FIP and injectors functional for the following capacities of DG 62.5 to 400 KVA all as specified and directed.
M & L for Disconnecting the electric connection of Alternator of capacity 400 KVA DG set, taking the accumalator and cleaning the core assembly through air blower, heat varnishing with insulating material complete all as directed.
All as per serial Item No. 52.00 here in before but of capacity 200 to 320 KVA
All as per serial Item No. 52.00 here in before but of capacity 62.5 to 160 KVA
S & F Water Pump of make as per OEM including taking down existing un-serviceable water pump complete all as specified and directed.
S & F Lub Oil pump high discharge of required standard size of make as per OEM including taking down existing un-serviceable Lub Oil pump high discharge complete all as specified and directed.
S & F maintenance free battery of 12 V minimum 180 AH including terminal clamps, copper lead of suitable length including testing and commissioning including taking down existing un-serviceable battery complete all as specified and directed by Engr-in-Charge.
All as per Sl item No. 82.00 here in before but for 100 AH
M & L for cleaning external surface with cleaning agent of capacity of 100 to 160 KVA DG Set any make complete all as specified and directed.
All as per serial Item No. 59.00 here in before but of capacity 200 to 320 KVA DG Set
All as per serial Item No. 59.00 here in before but of capacity 400 KVA DG Set
M&L for Cleaning of diesel tank of DG set of any capacity KVA carefully by draining out fuel in the tank including disconnection from fuel system, De-scaling the diesel tank with water pressure and removing the complete sludge deposited, drying the tank, repairing any leakage, cleaning and testing of fuel line up to fuel pump inlet complete all as specified and as directed.
M&L for De-scaling of radiator of DG set of capacity 62.5 to 160 KVA by dismantling the upper & lower tank and cleaning the core pipes with cleaning chemicals (radi wash), components and arresting the leakage in core by brazing / dummy with lead including cleaning of upper and lower tanks and replacing the upper and lower gaskets and required nuts, bolts, re-fixing the same including testing and painting complete all as specified and directed.
All as per serial Item No. 63.00 here in before but of capacity 200 to 320 KVA DG Set
All as per serial Item No. 63.00 here in before but of capacity 400 KVA DG Set
S & F Self starter 24 volt DC of make as per OEM including taking down existing un-serviceable Self starter complete all as specified and directed.
M& L for replacing, transporting, servicing of self starter 12 / 24 Volt DC at authorised service center and refixing the same and testing complete all as specified and directed.
Maintanence and servicing the AMF panel and replace the unserviceable items and testing and replace unserviceable wiring connection in panel for automatic operation through relay, contactor, timer, sensor etc all as directed.
S & F 3 pole power contractor type AC3 not less than 250 A with Aux contacts 2 Nos 2 NC , suitable for AMF panel including taking down existing un-serviceable power contractor complete all as specified and directed.
S & F AC Control contactor - M00AC-15 4A at 415 V, suitable for AMF panel including taking down existing un-serviceable contactor complete all as specified and directed.
S & F DC Control contactor - M00DC-15 4A at 415 V, suitable for AMF panel including taking down existing un-serviceable contactor complete all as specified and directed.
M&L for carrying out 'B' check for DG set of capacity 400 KVA after 06 months or 250 hrs running, whichever is earlier as per manufacturer's recommendation including replacement of fuel filters, air filters, oil filters, 'O' rings, gasket etc complete all as per manufacturers instructional manual and all as directed by Engg-in-charge. Note:- Unit rates quoted against this item shall be considered to include cost of fuel filters, air filters, oil filters, 'O' rings, gasket etc.
All as per Sl item No. 72.00 here in before but for DG Set of 320 KVA capacity
All as per Sl item No. 72.00 here in before but for DG Set of 250 KVA capacity
All as per Sl item No. 72.00 here in before but for DG Set of 200 KVA capacity
All as per Sl item No. 72.00 here in before but for DG Set of 140 KVA capacity
All as per Sl item No. 72.00 here in before but for DG Set of 62.5 to 100 KVA capacity
S & F Air cleaner filter for 400 KVA DG set matching with existing and as per recommendations of manufacturer including taking down existing un-serviceable Air cleaner filter complete all as specified and directed.
All as per Sl item No. 78.00 here in before but for DG Set of 320 KVA capacity
All as per Sl item No. 78.00 here in before but for DG Set of 250 KVA capacity
All as per Sl item No. 78.00 here in before but for DG Set of 200 KVA capacity
All as per Sl item No. 78.00 here in before but for DG Set of 140 KVA capacity
All as per Sl item No. 78.00 here in before but for DG Set of 62.5 to 100 KVA capacity
S&F on-load change over switch 400 Amp capacity, four pole, 415 volts, manual change over with Sheet metal enclosure including fixing in existing panel and necessary modification in the panel (if reqd) including taking down Un-serviceable on-load change over switch complete all as specified and directed.
All as per Sl item No. 84.00 here in before but 200 Amp capacity
All as per Sl item No. 84.00 here in before but 100 Amp capacity
Comprehensive maint for the following UPS installed once in a month or as and when directed by Enger-in-Charge as per requirement by qualified technician, comprising of the following outlined services for 04 Nos online UPS as following:- (a) ICU 60 KVA-01 No (b) OT 60 KVA-01 No Notes:- (i) The Contractors technical team shall visit the installation site for periodic preventive maintenance, check up of the UPS system and batteries every month. System shall be cleaned and general performance will be checked and report shall be submitted to the Engr-in- Charge. (ii) DC back up source will be maintained by applying white petroleum jelly, checking/servicing of batteries incl toping up of distilled water etc as applicable. (iii) Apart from the periodic preventive maintenance visits, all break down calls for the systems covered under the contract shall be attended Including Sunday and holidays. (iv) Cost of all the minor spares (including Inverter Transfromer) to put the UPS in working condition shall deemed to be included in unit rate quoted complete however supply of major componants shall be measured under relvent Items. (v) Response time during normal working hours shall not be more than 4 Hrs from the time of receipt of complaint and the resolution time shall be maximum 48 hrs, based on the nature of complaint and replacement of components and boards (vi) Standby UPS of similar capacity shall be provided by the contractor on site till the repair of UPS Transport/rent of the same shall be born by the contractor during the contract period and unit rate quoted shall deemed to include this aspect complete all as directed by the Engr-in-charge
S&F rectifier control card for 120 KVA Online UPS including taking down existing rectifier control card complete all as specified and directed.
S&F inverter control card for 120 KVA Online UPS including taking down existing inverter control card complete all as specified and directed.
S&F IGBT Drive card for 120 KVA Online UPS including taking down existing IGBT Drive card complete all as specified and directed.
S&F input sensing transformer for 120 KVA Online UPS including taking down existing input sensing transformer complete all as specified and directed.
S&F output feedback transformer for 120 KVA Online UPS including taking down existing ioutput feedback transformer complete all as specified and directed
S&F LCD Display for 120 KVA Online UPS including taking down existing LCD Display complete all as specified and directed.
S&F Control and power cable for 120 KVA Online UPS including taking down existing Control and power cable complete all as specified and directed.
M&L for repair of 140 KVA DG Set by dismantling the sub-assemblies such as fuel pump, fuel injection, wood ward governor, turbo-charger, radiator, oil cooler, engine heads, rocker arms. Self starter, dynamo-engine wiring, terminal contacts and safety controls etc. including replacement of gaskets, spare parts as required and re-assembling the sub-assemblies after carrying out necessary repairs including testing and commissioning complete all as specified and directed.
jyothi constructions (BID ID -3313986)
SREE DURGA INFOTECH (BID ID -3314259)
ALPHA ENGINEERING CONSTRUCTIONS (BID ID -3308533)
GVR ENGINEERING WORKS (BID ID -3307789)
S.S.TRADERS (BID ID -3313588)
PNR CONSTRUCTIONS (BID ID -3303525)
M/S CHANDRA ENGINEERS AND CONTRACTORS (BID ID -3313124)
NJ ENTERPRISES (BID ID -3314194)
VEEKSHITH ENTERPRISES (BID ID -3314534)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .