Deep Boring at Block Nursary Govindpur(2) RENOVATION OF GARDENER RESIDENCE INCLUDING TOILET AND WATER SUPPLY OF BLOCK NURSRY GOVINDPUR(3) INSTALLATION OF 10 NOS. SOLAR LIGHT AT BLOCK NURSARY GOVINDPUR

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per. Specification and direction of E/I (Vide classification of Soil item _B)

Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75B one Brick flat soling as per building specification and direction of E/I

Providing P.C.C M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 excluding screening shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I

Sand (Lead 11 Km.(P))

Brick (Lead 5Km.(P))

Stone Chips (Lead 10 Km.(P))

Cement + rod (Lead 2Km.(P))

Supplying and laying 9.0 m height octagonal hot dip galvanized pole (bop 9032)with top dia 70 mm bottom dia 175 mm and make of 3.0 mm thick sheet bore plate dimension 275x275x16 mm including suitable size of foundation bolt -- all complete.(M745P-47 PART -A)

ITC of the 9.0 mtr octagonal pole & light fitting with the help of suitable tools and plants and construction of shallow foundation with M25 grade concreate considerng safe soil bearing capacity of 10 t/mtr sq but excluding wire and MCB ( -876P-170)

Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 35 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%),, Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, with Lithium-Iron Phosphate Battery (LiFePO4), charging time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 35 watt, Input voltage: 12V DC, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, IP-66,IK-08, CRI ≥70 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15 , lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K (As per American National Standard Institute (ANSI Bin)), life time (LED, Driver & electrical circuitry) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Aluminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. All as per pre approved by Engineer in-charge complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm speed as per the site location. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 35 Watt (System lumen efficacy >120 lm/Watt)

Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to125.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Supplying and commissionig of submersible pump set conforming to IS 8034 and motor conforming to IS 9283 should be suitable for various head and discharge with stainless steel pump soft and polypyenen -do-do- all complete job aas per specification and direction of E/I . 100 MM dia 1.5 HP Pump (sl. 139 M 1055, PG- 124 Part A)

providing and fixing M.S clamp of required dia to the top ofcasing/housing pipe of tubewell as per IS: 2800(part I) including necessary bolts & nuts of required size complete 200 mm clamp

Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40mm nominal outer dia pipe

Supplying fitting of standard make starter pannel board with arrangement of aa necessary protection inlcuding all taxes royalty etc all complete job as per direction of E/I

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40mm nominal outer dia pipe

Rope and motor lowering and fitting

Polythene water stoarage tank of ISI mark(e.g Sintex/sinter/Himgiri/Gangotri etc.) with cover and locking system

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in column and plinth with approved quality of Stone as per building specification and direction of E/I . 5.3.14

Centering and Shutering including strutting propping etc.and remove all Foundation, Footing bases of Column etc for mass concrete

Column, pillers, piers and abutment etc

Lintels, Beams, Plinth Beam and Girders etc

Suspended floors roofs landing balconies and access platform

Providing 50mm thick damp proof course with cement concrete M-15 with nominal mix of (1:2:4) with approved as per building specification and direction of E/I 5.3.5

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. 5.2.14

Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I 5.7.3

Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) 8 mm dia 20 %

10 mm dia @40%

12mm dia @ 40 %

Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I 5.7.3

labour for cleaning

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D 5.8.45

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single tee with door 12.42.3.2 110x110x110 mm

Bend 87.5° 110 mm bend

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Supplying fitting and fixing viterous shite glazed earthen ware I.W.C. of parry hindustan or any other I.S.S approved make with 100 mm H.C.I. "p" trap 15 litres C.I.. Or C. pull and let go flushing clstern of name or other I.S.S equivalent make, complete with all fitting,C.i.. or C.C brackets 32 mm alkathene/P.V.C telescopoc flush,pipe about 2 M long with one brass coupling and clamps G.I chain pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stop cock of weigth not less than 50 grms. 15mm P.V.C connection pipe 450 mm long and the exposed pipe amd cistern with two coats of approved paint over a coat of red oxide primer etc all complete as per specification and direction of E/I. (C) 450 mm long I.W.C (b)with 12.5lit. low level C.I cistern

Supplying fitting and fixing viterous shite glazed earthen ware I.W.C. of parry hindustan or any other I.S.S approved make with 100 mm H.C.I. "p" trap 15 litres C.I.. Or C. pull and let go flushing clstern of name or other I.S.S equivalent make, complete with all fitting,C.i.. or C.C brackets 32 mm alkathene/P.V.C telescopoc flush,pipe about 2 M long with one brass coupling and clamps G.I chain pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stop cock of weigth not less than 50 grms. 15mm P.V.C connection pipe 450 mm long and the exposed pipe amd cistern with two coats of approved paint over a coat of red oxide primer etc all complete as per specification and direction of E/I. (C) 450 mm long I.W.C (b)with 12.5lit. low level C.I cistern

Providing and fixing male ended 15 mm dia brass bib cock of approved quality (wt. not less than 350 gms) with extra socket all complete as per specification and direction of E/I.

Providing & Fixing Brass /CI Stop Cork Of approved quality (A) 20 mm Dia

Providing and fixing CPVC pipes do- all complete job. Exposed on Wall 20 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Conselled 15mm dia

Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required.1.1.3 Group C

Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required. 1.7.2 :- 2x2.5 sqmm+1x2.5sqmm earth wire

1.7.5 :- 2x10 sqmm+1x10 sqmm earth wire

1.7.12 :- 4x16 sqmm+2x6 sqmm earth wire

Supplying and fixing suitable size GI box/PVC do………do…… all complete job1.22.9 :- 210x206x48mm

Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 2.9.4 :- 4WAY Double door , horizontal type.

Supplying and Fixing- C series MCB 6/32/Amps TPN do……do……. All complete job

Supplying and Fixing- C series MCB 6/32/Amps SPN do……do……. All complete job

Supplying and fixing following rating four pole 415 volts Isolator in the existing MCB DB complete with connections testing and commissioning etc as required2.15.2 :- 63 amps 2.15.2 :- 63 amps

ITC ceiling fan installation

Supplying Installation ,testing and commissioning of following size ceing fan 3 blades conforming to IS : 374:2019 including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm FR PVC insulated ,copper wire suitable for 230 V 50 Hz, single phase supply etc. complete as required. 1200 mm (48'') Ceiling fan

Supplying LED 15/16 Watt

LED FLOOD LIGHT 50/60 W

S/F Batten Holder -Do - -do-

Providing & Fixing 63 Amp 4 Pole on off Changeover Switch

supplying and fixing following piano type switch/socket on the exiting box/ cover including connections etc as required 3 pin 5/6 A socket outlet Each

5/6 amps switch

Supplying fitting and fixing on ceiling /wall mounted single /double box type 4' x 40 watt tubelight with copper choke complete as required

Labour cess -1%

Please Enable Macros to View BoQ information