Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹81,000
Closing Date
26 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Aayush Kumar Singh
Holta camp palampur
SPL REPAIR OF BLDG NO M 3 SINGLE OFFR ACCN AT ALHILAL MIL STN UNDER GE PALAMPUR
2026_MES_797430_1
GEP-99/2026-27
Open Tender
Civil Works
Item Rate
270 days
Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹81,000
5 Nov 2026
5 Nov 2026
3 Dec 2026
5 Nov 2026
26 Nov 2026
19 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and as directed. | 18 | Each | - | - |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and as directed. | 12 | Each | - | - |
| 3 | S&F pressed steel frames made out of MS sheet 1.25 mm thick of size 105mm x 60mm for doors with one or more rebates including necessary fixing lung, hinges, lock strike plate etc. complete all as specified and as directed. | 30.6 | Rm | - | - |
| 4 | S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed. | 30.6 | Rm | - | - |
| 5 | M&L for Plain cement concrete 1:2:4 (Nominal mix), type B-0 (Using 12.5 mm graded crushed stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc. complete all as specified and as directed. | 0.44 | Cum | - | - |
| 6 | S&F 35 mm thick wooden flush shutters, solid core construction with block board and 9 mm plywood face panels, commercial type on both sides, complete all as specified and directed. | 21.6 | Sqm | - | - |
| 7 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebate and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) all as specified. | 10.8 | Sqm | - | - |
| 8 | S&F Stainless steel wire netting 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. | 19.43 | Sqm | - | - |
| 9 | M&L for preparation of wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 43.2 | Sqm | - | - |
| 10 | S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed. | 28.5 | Rm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
td.pdf
Tender Documents • 1.29 MB
BOQ_894492.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .