Civil and Structural works for Revamping of the steam and power system (RSPS#2) at TNPL Unit I (Phase 1)

Amount

EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTRS AS DIRECTED IN DEPTH FROM GROUND LEVEL TO -2 MTR

EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTRS AS DIRECTED IN DEPTH BELOW -2 MTR TO -4 MTR.

EARTH WORK EXCAVATION IN ALL SOILS AND SUB SOILS EXCLUDING ROCK INCLUDING BACKFILLING IN SIDES OF FOUNDATIONS AND BASEMENT, WATERING, CONSOLIDATION, INCLUDING DEWATERING WHEREVER NECESSARY, ETC., AND DISPOSING OFF THE SURPLUS EARTH WITHIN A LEAD OF 40 MTR AS DIRECTED IN DEPTH BELOW -4 MTR TO -6 MTR.

EXCAVATE AND REMOVE ROCK AT ALL LEVELS BY CHISEL AND HAMMER OR USING MACHINERY BUT BLASTING NOT PERMITTED (40% VOIDS TO BE DEDUCTED IN CASE OF STACK MEASUREMENT) INCLUDING DEWATERING AND DISPOSE OFF WITHIN A LEAD OF 40 MTR AS DIRECTED.

EXCAVATE AND REMOVE HARD ROCK REQUIRING CONTROLLED BLASTING AT ALL LEVELS (40% TO BE DEDUCTED IN STACK MEASUREMENTS OR ACTUAL EXCAVATED HARD ROCK PRE-MEASUREMENT WILL BE TAKEN INTO ACCOUNT WITHOUT STACKING) INCLUDING DEWATERING AND DISPOSE OFF WITHIN A LEAD OF 40 MTR AS DIRECTED.

EARTH CUTTING, TRANSPORTATION WITHIN THE PREMISES, UNLOADING, SPREADING, LEVELLING AND CONSOLIDATION WITH 10MT ROAD ROLLER TO A LEAD OF 2KM.

SUPPLYING AND FILLING WITH M SAND IN FOUNDATION AND BASEMENT INCLUDING WATERING AND CONSOLIDATION

TRANSPORT EXCAVATED EARTH AND REFILLING THE FOUNDATION IN LAYERS, LOADING, UNLOADING, SPREADING, LEVELING, WATERING, CONSOLIDATION, ETC., AS DIRECTED UPTO A LEAD OF 2 KM. (25% VOIDS TO BE DEDUCTED IN LORRY/TRACTOR MEASUREMENTS)

SUPPLYING AND FILLING OF EARTH BROUGHT FROM OUTSIDE AREA INCLUDING LOADING, UNLOADING, SPREADING ETC., COMPLETE (25% VOIDS TO BE DEDUCTED IN LORRY / TRACTOR MEASUREMENTS)

CEMENT CONCRETE 1:4:8 USING 25MM DOWN GAUGE BLUE GRANITE AGGREGATE IN FOUNDATIONS, MUD MAT, FLOORING EXCLUDING SHUTTERING BUT INCLUDING RAMMING, LEVELLING, CURING ETC., COMPLETE.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS FOUNDATIONS, PEDESTALS, COLUMNS, WALLS, SHELL WALL, FOOTING, RAFT, PLINTH BEAM, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE BELOW GROUND LEVEL AND UPTO FFL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE FFL TO +7 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +7 MTR TO +14 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +14 MTR TO +21 MTR LEVEL.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE +21 MTR TO +30 MTR LEVEL.

CEMENT CONCRETE 1:2:4 USING 20MM AND DOWN GRADED BLUE GRANITE AGGREGATE IN 50MM THICK PRECAST COVER SLAB FOR SHELVES/DRAINS EXCLUDING REINFORCEMENT BUT INCLUDING NECESSARY FORMWORK, FIXING IN POSITION, PERFORMING THE EDGES OF REBATES OF DRAINS TO STRAIGHT LINE, FINISHING THE TOP SURFACE SMOOTH IN ALL FLOORS.

CEMENT CONCRETE 1:2:4 USING 20MM AND DOWN GRADED BLUE GRANITE AGGREGATE IN 75MM THICK PRECAST COVER SLAB FOR SHELVES/DRAINS EXCLUDING REINFORCEMENT BUT INCLUDING NECESSARY FORMWORK, FIXING IN POSITION, PERFORMING THE EDGES OF REBATES OF DRAINS TO STRAIGHT LINE,FINISHING THE TOP SURFACE SMOOTH IN ALL FLOORS.

SUPPLYING AND LAYING OF M30 READY MIX CONCRETE WITH GOOD QUALITY FINE AND COARSE AGGREGATE INCLUDING COST OF 43 GRADE OPC CEMENT, TRANSIT MIXERS AND PUMPING ARRANGEMENTS, COMPACTING USING VIBRATORS, ETC., COMPLETE AT ALL LEVELS.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE FOOTING, RAFT, PLINTH BEAM, ETC., AS "PLASTER FREE FINISH" BELOW GROUND LEVEL AND UPTO FFL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE FFL TO +7 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE +7 MTR TO +14 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE +14 MTR TO +21 MTR LEVEL.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE +21 MTR TO +30 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., BELOW GROUND LEVEL AND UPTO FFL.

FORM WORK IN CIRCULAR / CURVED SURFACES USING GOOD QUALITY OF PLYWOOD BY CONVENTIONAL METHOD, ETC., COMPLETE FROM FFL TO +7 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES USING GOOD QUALITY OF PLYWOOD BY CONVENTIONAL METHOD, ETC., COMPLETE FROM +7 TO +14 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., COMPLETE FROM +14 TO +21 MTR LEVEL.

FORM WORK IN CIRCULAR / CURVED SURFACES WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD BY CONVENTIONAL METHOD AND AS "PLASTER FREE FINISH" ETC., COMPLETE FROM +21 TO +30 MTR LEVEL.

PROVIDING AND FIXING IN POSITION "SLIPFORM" SHUTTERING FOR CIRCULAR CHIMNEY / SILO WALL INCLUDING COST OF SPECIAL SHUTTERING HYDRAULIC JACK, PLATFORM, LIFTING ROD ETC., TO BE PROVIDED BY CONTRACTOR AND RENDERING THE CONCRETE WALLS FROM FFL TO REQUIRED HEIGHT AS PER THE DRAWING.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

PROVIDING OPENING WITH REMOVAL WOODEN FORMWORK OF SIZE UPTO 0.50 SQ.M AREA IN THE SHELL WALL/CONCRETE SLABS AND DE-SHUTTERING AFTER CONCRETING COMPLETE AT ALL LEVELS.

PROVIDING OPENING WITH REMOVAL WOODEN FORMWORK OF SIZE FROM 0.50 SQ.M TO 1.00 SQ.M AREA IN THE SHELL WALL/CONCRETE SLABS AND DE-SHUTTERING AFTER CONCRETING COMPLETE AT ALL LEVELS.

PROVIDING POCKETS FOR FOUNDATION BOLTS USING SUITABLE WOODEN REMOVAL FORMWORK INCLUDING REMOVING THE SAME WHILE THE CONCRETE IS WET AND FIXING THE FOUNDATION BOLTS FOR MACHINERY FOUNDATIONS ETC., THE SIZE VARIES FROM 150 SQ.MM TO 250 SQ.MM OF DEPTH VARYING FROM 400 MM TO 900 MM (ANY INCREASE IN SIZE AND DEPTH OVER THE ABOVE WILL BE CONSIDERED AND PAID FOR PRORATA BASIS).

PROVIDING POCKETS FOR FOUNDATION BOLTS USING SUITABLE WOODEN REMOVAL FORMWORK INCLUDING REMOVING THE SAME WHILE THE CONCRETE IS WET AND FIXING THE FOUNDATION BOLTS FOR MACHINERY FOUNDATIONS ETC., THE SIZE VARIES FROM 150 SQ.MM TO 250 SQ.MM OF DEPTH VARYING FROM 900 MM TO 1500 MM (ANY INCREASE IN SIZE AND DEPTH OVER THE ABOVE WILL BE CONSIDERED AND PAID FOR PRORATA BASIS).

TAKE DELIVERY OF CONBEXTRA GP2 OR EQUIVALENT AND MIX WITH 6MM CHIPS 30% FOR GROUTING OF POCKETS INCLUDING CLEANING, SHUTTERING, COMPACTION, CURING, ETC., COMPLETE AT ALL LEVELS.

PROVIDING COURSED RUBBLE STONE MASONRY WITH POINTING WORKS, SECOND SORT IN CEMENT MORTAR 1:7 WITH THROUGH BOND STONES 2 MTRS APART IN EACH COURSE, PLACED IN A STAGGERED PATTERN AND COURSE NOT LESS THAN 150MM HIGH WITH FACE STONES PLACED HEADERS AND STRETCHERS ALTERNATIVELY TO BREAK JOINTS BY ATLEAST 75MM INCLUDING CURING ETC., COMPLETE FOR FOUNDATION BASEMENT UPTO +1.00 MTR LEVEL.

SUPPLY AND LAYING OF FLY ASH BRICKS IN CM 1:6 IN FOUNDATIONS AND BASEMENT UPTO +0.00 MTR INCLUDING CURING, ETC., COMPLETE.

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +7.00 MTR TO +14.00 MTR

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +14.00 MTR TO +21.00 MTR.

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +21.00 MTR TO +30.00 MTR.

SUPPLY AND LAYING OF FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4, EXCLUDING PLASTERING, INCLUDING SCAFFOLDING, CURING ETC., COMPLETE AT ALL LEVELS.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR 1:4, 12MM THICK AT ALL LEVELS INCLUDING NECESSARY SCAFFOLDINGS AND CURING ETC., COMPLETE.

PREPARE SURFACES OF WALLS / CEILINGS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR 1:3, 20MM THICK AT ALL LEVELS INCLUDING NECESSARY SCAFFOLDINGS AND CURING ETC., COMPLETE.

PREPARE SURFACES OF CEILING AND PLASTER IN CM 1:3,12MM THICK INCLUDING SMOOTH FINISHING INCLUDING SCAFFOLDING CURING ETC., AT ALL LEVELS.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR OF RCC TANKS WITH CEMENT MORTAR, 12MM THICK IN CM 1:3 USING WATER PROOF COMPOUND 2% BY WEIGHT OF CEMENT OF APPROVED MAKE AS DIRECTED BY ENGINEER IN CHARGE AT ALL LEVELS.

PROVIDING 12MM X 12MM GROOVE IN BEAM,COLUMN, LINTEL, JOINTS, ETC., WHILE PLASTERING INCLUDING LABOUR, ETC., COMPLETE.

PROVIDING BORDERS WITH CM 1:3, 100MM WIDE, 20MM THICK INCLUDING FINISHING NEATLY, ETC, COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF 50MM THICK EXPANDABLE FILLER BOARD HD 100 JOINTS AT ALL LEVELS (SUPREME MAKE)

PREPARE SURFACES OF BASE COURSE BY REMOVING ALL LOOSE MORTAR BY HACKING AND LAY TO REQUIRED SLOPE 50 MM THICK GRANO FLOOR OF MIX 1:1.5:3 USING 10 TO 12 MM GRANITE CHIPS INCLUDING FINISHING THE TOP LAYER WITH A POWER TROWEL AT ALL LEVELS.

PREPARE SURFACES OF BASE COURSE BY REMOVING ALL LOOSE MORTAR BY HACKING AND LAY TO REQUIRED SLOPE 25MM THICK GRANO FLOOR OF MIX 1:1.5:3 USING 10 TO 12 MM GRANITE CHIPS INCLUDING FINISHING THE TOP LAYER WITH A POWER TROWEL AT ALL LEVELS.

PREPARE SURFACES OF CONCRETE FLOORING AND DO POWER TROWLING FINISH AS DIRECTED BY ENGINEER INCHARGE.

GROOVE CUTTING OF SIZE 40MM DEEP X 6MM WIDTH ON THE RCC FLOOR WITH NECESSARY EQUIPMENT, LABOUR ETC., COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.

SUPPLYING AND FIXING OF VITRIFIED FLOOR TILES OF APPROVED SIZE AND SHADE AND FIXING THEM IN POSITION FOR FLOORS AND SKIRTING WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MATE COMPOUND AT ALL LEVELS.

SUPPLYING AND FIXING IN POSITION OF MS WINDOW GRILL USING 12MM MS SQUARE BARS / MS FLATS / ROUNDS INCLUDING NECESSARY WELDING AND APPROVED DESIGN INSTRUCTED BY ENGINEER INCHARGE INCLUDING APPLYING ONE SHOP COAT OF RED OXIDE PRIMER ETC., COMPLETE.

SUPPLY AND FIXING IN POSITION OF MANUALLY OPERATED ROLLING SHUTTER PULL-PUSH TYPE WITH NECESSARY SIDE COVER, INTERNAL LOCK, TOP MS HOOD, CHAIN PULLEY, ETC., COMPLETE INCLUDING TWO COATS OF SYNTHETIC ENAMEL PAINT OVER ONE COAT OF PRIMER INCLUDING COST OF ALL MATERIALS, LABOUR CHARGES, ETC., COMPLETE. (ONLY CLEAR OPENING WILL BE MEASURED AND PAID).

SUPPLYING AND FIXING OF ALUMINIUM GLAZED DOOR SINGLE LEAF OF SIZES 1.0 X 2.4 MTR OR 1.0 X 2.1 MTR USING FRAMES OF SIZE 63MM X 38MM (1.50MM THICK) AND SHUTTER FRAME OF SIZE 100MM X 40MM BOTTOM (1.50MM THICK) AND ALL OTHER FRAMES OF SIZE 45 X 45MM WITH PANEL IN TWO PARTS COVERED WITH 5MM THICK PLAIN GLASS IN THE TOP PORTION AND 9MM THICK LAMINATED NOVAPAN OR DURATUFF SHEET IN THE BOTTOM PORTION INCLUDING FIXING OF HANDLES, LOCK, ALUMINIUM BEADING, RUBBER GASKET, PIVOT, DOOR CLOSER, ETC., COMPLETE.

PROVIDING AND FIXING OF UPVC DOORS OF SIZE 1.00 M X 2.100M WITH SINGLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60 X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF AUTOMATIC HINGES, ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

PROVIDING AND FIXING OF UPVC DOORS OF SIZE 1.50 M X 2.100M WITH DOUBLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60 X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF AUTOMATIC HINGES, ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM WINDOW (SLIDING TYPE ) OF FRAME SIZE 63MM X 45MM X 1.5MM THICK WITH NECESSARY LOCKING ARRANGMENT, RUBBER GASKET, BEADING ETC., INCLUDING 5MM THICK PLAIN GLASS FOR THE SAME (MAKE JINDAL OR INDAL SECTION).

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM WINDOW (FIXED TYPE ) OF FRAME SIZE 63MM X 45MM X 1.5MM THICK WITH NECESSARY LOCKING ARRANGMENT, RUBBER GASKET, BEADING ETC., INCLUDING 5MM THICK PLAIN GLASS FOR THE SAME (MAKE JINDAL OR INDAL SECTION).

SUPPLYING AND FIXING OF ALUMINIUM LOUVERED VENTILATOR OF SIZE 750 X 900 MM WITH ADJUSTABLE LOUVERS USING 5MM THICK FROSTED GLASS RATE INCLUDES ALL CONSUMABLES, LABOUR CHARGES ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF APPROVED COLOUR COATED ALUMINIUM PARTITION USING FRAME SIZE 63MM X 40MM X 1.5MM THICK BOTH HORIZONTAL AND VERTICAL AT 900MM INTERVAL AS INSTRUCTED. THE BOTTOM SECTION OF THE PARTITION SHALL BE 100MM X 45MM X 1.5MM THICK.THE PARTITION SHALL BE TWO OR THREE PARTS WITH 5MM THICK GLASS & 9MM THICK NOVAPAN SHEET AS DESIGNED WITH ALUMINIUM BEADING, RUBBER GASKET ETC., COMPLETE AT ALL LEVELS

SUPPLY AND FIXING OF PVC STANDARD DOOR AS PER SKETCH. 4 ( X ) MODEL OF APPROVED COLOUR AND MAKE.

SUPPLY AND FIXING IN POSITION OF COUNTRY WOOD FLUSH DOORS OF SIZE 1.0MTR X 2.10 MTR WITH 100 X 65MM SEASONED COUNTRY WOOD FRAMES AND FACTORY MADE FLUSH DOOR SHUTTER OF THICK 32MM AND FIXING OF LAMINATION SHEET ON BOTH SIDES OF APPROVED DESIGN AND MAKE INCLUDING FIXING OF 6 LEVER MORTISE LOCK WITH CP HANDLES NECESSARY ALUMINIUM HARD WARE FITTINGS, ETC., COMPLETE IN ALL FLOORS.

SUPPLY AND FIXING OF SINGLE LEAF 2 HRS FIRE RATED STEEL DOOR FRAME PROFILE 143 X 57 MM, FRAME SHEET THICKNESS 1.60 MM, SHUTTER SHEET THICKNESS 1.60 MM, SINGLE REBATE - DOUBLE, OF APPROVED MAKE AND COLOUR WITH VIEW GLASS OF REQUIRED SIZE - SINGLE GLAZE WITH CERAMIC TAPE INCLUDING NECESSARY FITTINGS LIKE DORMA MAKE SS BALL BEARING BUTT HINGES 100 X 75 X 3 MM, DOOR CLOSER TS 71 WITH STD ARM - SILVER FINISH, MORTISE SASH LOCK WITH EPC CYLINDER AND PURE 8100 - SS 304 GRADE LEVER HANDLE SET ARRANGEMENTS ETC., COMPLETE.

SUPPLYING AND FIXING OF EVERITE MAKE HYDRAULIC DOOR CLOSER.

SUPPLY OF REFLECTIVE TYPE SUN CONTROL FILM

PREPARE SURFACES AND RUBBING WITH CARBORANDUM STONE AND FILLING THE JOINTS WITH CM 1:3 AND APPLY ONE COAT OF CEMENT WASH AT ALL LEVELS INCLUDING SCAFFOLDING, ETC., COMPLETE.

SUPPLY AND APPLICATION OF ONE COAT OF BIRLA WHITE / JK WHITE OR EQUIVALENT QUALITY OVER WALL OR CEILING SURFACES INCLUDING COST OF SCAFFOLDING, ALL MATERIALS, LABOUR AND OTHER INCIDENTAL CHARGES ETC. COMPLETE AT ALL LEVELS.

PREPARE SURFACES AND APPLY TWO COATS OF WHITE WASH USING APPROVED MAKE INCLUDING MIXING WITH SUFFICIENT QUALITY OF GUM LIKE FEVICOL ETC., COMPLETE AT ALL LEVELS.

THOROUGHLY PREPARE THE SURFACES OF WALLS AND APPLY TWO COATS OF FIRST QUALITY WALL PUTTY INCLUDING FINISHING SMOOTHLY WITHOUT ANY WAVINESS, ETC., AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF EXTERIOR PRIMER AND TWO COATS OF EXTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. (ASIAN OR BERGER).

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF PRIMER AND TWO COATS OF INTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF RED OXIDE PRIMER AND TWO COATS OF INDUSTRIAL QUALITY SYNTHETIC ENAMEL PAINT OF APPROVED MAKE AND COLOUR FOR STEEL MEMBERS INCLUDING SCAFFFOLDING, LABOUR CHARGES ETC., AT ALL LEVELS.

TAKE DELIVERY OF MS PLATE, MS ANGLES FOR FABRICATION AND FIXING IN POSITION INCLUDING WELDING WITH REINFORCEMENT BARS AS INSERTS/NOZZING ANGLES IN CONCRETE FLOORS, BEAMS, COLUMNS, WALLS, SLABS ETC., COMPLETE AT ALL LEVELS.

TAKE DELIVERY OF SS 304 GRADE SS PIPES / ANGLES / FLATS SUPPLIED BY TNPL AT FREE OF COST AND FABRICATE AS SS CURVED HANDRAILS AS PER DRAWING AT ALL LEVELS INCLUDING COST OF ALL CONSUMABLES COMPLETE.

TAKE DELIVERY OF GI / MS PIPE TO FABRICATE AND ERECT IN POSITION AT ALL LEVELS, AS HANDRAILS USING 25, 32, 40 AND 50MM DIA GI / MS PIPE. HANDRAILS SHALL BE VERTICAL POSTS OF ONE METRE HEIGHT IN PIPE AT AN INTERVAL OF ONE METRE AND TWO HORIZONTAL RAILING ONE AT THE TOP OTHER AT THE MIDDLE OF THE POSTS. THE COST INCLUDES ONE COAT OF RED OXIDE PRIMER AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE, ETC., COMPLETE.

PROVIDE AND FIX IN POSITION 110MM DIA PVC RAIN WATER PIPES INCLUDING NECESSARY CLAMPS, SWAN NECKS, BENDS, SHOES, TW BLOCK ETC., COMPLETE. (PRESSURE CAPACITY: 6 KG/ SQ.CM).

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (HILTI MAKE -MODEL NO.1000ADR) WITH LABOUR FOR DISMANTLING OF CONCRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

DISMANTLING OF RCC M20/M25 CONCRETE WITH BREAKERS AND CUTTING OF THE STEEL REINFORCEMENTS, ETC., AND DISPOSE OFF THE DEBRIS TO A LEAD OF 2 KM APART AS DIRECTED.

DISMANTLING OF MUDMAT CONCRETE, PCC1:5:10, GRANO FLOORING, ETC., USING BREAKERS AND DISPOSE OFF WITHIN A LEAD OF 2 KM DISTANCE AS DIRECTED.

DISMANTLING OF RR/CR STONE MASONRY WALLS IN FOUNDATIONS AND SUPER STRUCTURES AND HANDING OVER THE STONES TO CIVIL DEPARTMENT AS DIRECTED ETC., COMPLETE.

DISMANTLE BRICK MASONRY IN GROUND FLOOR AND DISPOSE OFF WITHIN A INITIAL LEAD OF 40 MTR.

DISMANTLING OF EXISTING MS STRUCTURE, PLATFORM, ROOF TRUSS, ETC., WITHOUT DAMAGE AND HAND OVER TO TNPL STORES/DEPARTMENT FOR REUSE INCLUDING CONSUMABLES, TRANSPORTATION, ETC., COMPLETE AT ALL LEVELS.

DISMANTLING OF EXISTING ROOF AND CLADDING SHEET (GALVALUME / AC SHEET) WITHOUT DAMAGE AND HAND OVER TO TNPL STORES/DEPARTMENT FOR REUSE INCLUDING TRANSPORTATION, ETC., COMPLETE AT ALL LEVELS.

SUPPLY AND FIXING OF 12MM DIA MS FAN HOOK

TAKE DELIVERY OF STRUCTURAL STEEL SUPPLIED BY TNPL FREE OF COST, REMOVE BENDS IF ANY,FABRICATE AS BUILT UP COLUMN, BEAM, ROOF TRUSS & ROOF MONITOR, PURLIN, ETC., AND ERECT IN POSITION WITH MOBILE CRANE OR DERRICK AT ALL LEVELS, INCLUDING COST OF ALL CONSUMABLES LIKE GAS, STANDARD WELDING RODS, BOLTS & NUTS, TOOLS & TACKLES, SCAFFOLDING,ETC., COMPLETE. (AS PER DRAWING)

ERECTION OF SCAFFOLDING AND CLEANING THE SURFACES OF STRUCTURAL MEMBERS USING WIRE BRUSH, EMERY SHEETS AND APPLY ONE COAT OF RED OXIDE PRIMER OF APPROVED QUALITY AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF EITHER BERGER,ASIAN, SHALIMAR, ICI DULUX OR EQUIVALENT (INDUSTRIAL QUALITY) OF APPROVED COLOUR INCLUDING COST OF ALL MATERIALS,PAINT AND ALL OTHER INCIDENTAL CHARGES ETC.,COMPLETE AT ALL LEVELS.

TAKE DELIVERY OF SHEETS SUPPLIED BY TNPL AT FREE OF COST AND FIX IN POSITION FOR ROOFING. THE COST INCLUDES ALL REQUIRED FASTENERS, WASHERS, ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER INCHARGE.

TAKE DELIVERY OF SHEETS SUPPLIED BY TNPL AT FREE OF COST AND FIX IN POSITION FOR CLADDING. THE COST INCLUDES ALL REQUIRED FASTENERS, WASHERS, ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER INCHARGE.

TAKE DELIVERY OF RIDGE / BARGE BOARD / FLASHING SHEET SUPPLIED BY TNPL AT FREE OF COST AND FIX IN POSITION. THE COST INCLUDES ALL REQUIRED FASTENERS, WASHERS, ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER INCHARGE.

SUPPLY OF 2MM THICK POLY CARBONATE (SKY LIGHT) AND FIXING IN POSITION FOR ROOF AND SIDE CLADDING WITH SELF TAPPING SCREW AND EPDM WASHER ETC., UPTO +23M LEVELS.(ONLY LAID AREA SHALL BE MEASURED AND PAID)

SUPPLY OF WIND DRIVEN AIR VENT (600MM DIA ) AND FIXING IN POSITION FOR ROOF WITH SELF TAPPING SCREW AND EPDM WASHER ETC., UPTO +23 M LEVELS.

TAKE DELIVERY OF FOUNDATION BOLTS SUPPLIED BY TNPL AT FREE OF COST OF SIZE VARYING FROM M16 / M20 / M25 / M30 / M36 X 750 TO 1000 MM LONG FABRICATE TEMPLATES AND FIXING IN POSITION TO PROPER ALIGNMENT AND LEVEL. THE WORK INCLUDES WELDING TO THE EXISTING MAIN REINFORCEMENT AND TO THE ADDITIONAL REINFORCEMENTS AS ANCHORAGE TO THE FOUNDATION BOLTS AS DIRECTED BY THE SITE INCHARGE.

Bidder Name

Amount in Words

PRIYA ENGINEERING PROJECTS PRIVATE LIMITED (BID ID -1122280)