P/L Balance work of electrical Installation in Mayor Office Building near DMC office in ward No.6

Amount

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

2x1.5 Sq. mm. (ITEM No.116)

2x6.0 Sq. mm. (ITEM No.119)

Supplying and fixing 25 Amp Modular switch in the existing switch box / cover plate including connections etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge. (Makes:- L&T / Legrand / Goldmedal) (ITEM No.A/R)

Supplying and fixing 25 Amp Modular socket in the existing switch box / cover plate including connections etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge. (Makes:- L&T / Legrand / Goldmedal ) (ITEM No.A/R)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- (ITEM No.937)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.(ITEM No.927)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.(ITEM No.928)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

6 Amp to 32 AmpSingle pole. Cat-A.(ITEM No.1701)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.(ITEM No.1709)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A. (ITEM No.1728)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

Double door-16 way (ITEM No.1810)

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

Mirror light 610 mm, double lamp.(Category-A) (ITEM No.2706)

Supplying & fixing following type of Recess/surface mounted luminaires, white power coated CRCA housing diffusser to avoid glaire, pre-wired with stater, trigger circuit ,surge protection circuit lumen output of 100 lumiens per watt complete with all accesseries, connections , testing and commissioning etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

LED surface mounted square LED downlight (15 watt) (Make:- Philips/ GE/ Panasonic ((At per Panasonic Cat No.ADL04 R 153 ) (ITEM No.A/R)

S/E of cubical type LT panel 200 Amp made of ms CRCA sheet 16 g duly painted with grey powder coated paint suitable for housing 1No. MCCB 200Amp FP 36 KA as incoming and 2 Nos. MCCB 100 Amp 25 KA as outgoing, and 2Nos. 63 Amp Dp copper bus bar 200 Amp 4 strip and interconnection bus bar 63 Amp, Digital voltmeter 0-500 volt, Digital Amp meter 1 No. with 3 No. CT’s, slector switches, phase indicating lamp 3 nos. control SP MCB 3 Nos., cable enter box on both sides including the supply of above material of L&T/ABB make and to be fabricated as per approved drawing. The panel should be erected with (1050X700X300)suitable dimensions 15 CM high from ground level and 45 CM complete in all respects as required including carriage of material in all leads and lift and direction of Engineer-in-charge.(ITEM No.A/R)

Providing and fixing decorative extruded box fixture with LED driver, snap-on-installers, having surge protection circuit of 3KW and aluminium heat sink, suitable for LED up to 24 watt with lumen output of 100 lumens per watt, complete with all accessories, connections, testing and commissioning etc. as required complete in all respects including carriage of material in all leads and lift and direction of Engineer-in-charge.(ITEM No.A/R)

LED 24/22 watt,4 FEET Long LED (Make:- Havells , GE , Phillips /Jaguar Cat No. LGLZO1X024XN) Equivalen) (ITEM No.A/R)

Providing and fixing surface mounting LED luminaire of following rating with powder coated CRCA housing with high power LED, diffusser to avoid glaire, pre-wired with starter, trigger circuit, surge protection circuit lumen output of 100 lumens per watt, complete with all accesseries, connections, testing and commissioning etc. as required including carriage of material in all leads and lift and direction of Engineer-in-charge.(ITEM No.A/R)

LED 40 watt, 4'x1' feet long LED.(ITEM No.35.01)

Sourab Kuthiala

pankaj saini