Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC HIMACHAL PRADESH HP | ₹7.4 L Quoted ₹8.8 L | L1 | Accepted-AOC Award |
| 2 | L2₹9.0 LRejected-Finance HIMACHAL PRADESH HP | ₹9.0 L | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹9.3 LRejected-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | ₹9.3 L | L3 | Rejected-Finance Other than Lowest |
| 4 | L4₹9.5 LRejected-Finance VILL FAGOG P O BALOH TEHSIL JHANDUTTA DISTT BILASPUR HP | ₹9.5 L | L4 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | GULZARI LAL L2 | Raj Kumar Prop R.K. Construction L1 | Rajesh Kumar L3 | Kashmir Singh L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge. | 128.22 | Cum | 515 ₹66,033.30 | 500 ₹64,110 | 525 ₹67,315.50 | 530 ₹67,956.60 |
| 2.00 | Providing and laying in position cement concrete of specified grade excluding the of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4 sesandi B graded stone aggregate 40mm nominal size in all leads and lifts. | 2.73 | Cum | 7,700 ₹21,021 | 7,650 ₹20,884.50 | 7,850 ₹21,430.50 | 7,900 ₹21,567 |
| 3.00 | Centeng and shuttering including strutting, propping etc. and removal of form for heights Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. in all leads and lifts. | 39.96 | Sqm | 565 ₹22,577.40 | 550 ₹21,978 | 570 ₹22,777.20 | 575 ₹22,977 |
| 4.00 | Providing and laying in position cement concrete of specified grade, excluding the of centering, shuttering, finishing and reinforcement All work up to plinth level 1:2:4 (1 Cement: 2 Coarse sand 4 graded stone aggregate 40 mm normal size) omplete in all leads and lift | 27.98 | Cum | 8,150 ₹2.3 L | 8,100 ₹2.3 L | 8,200 ₹2.3 L | 8,250 ₹2.3 L |
| 5.00 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts. | 839.4 | Kg | 98 ₹82,261.20 | 95 ₹79,743 | 100 ₹83,940 | 101 ₹84,779.40 |
| 6.00 | Providing and Fixing Wire Rope 25 mm including cost of Fixing charges complete in all respect with in all leads and lifts. | 115 | Rmt | 1,100 ₹1.3 L | 1,020 ₹1.2 L | 1,200 ₹1.4 L | 1,250 ₹1.4 L |
| 7.00 | Providing and Fixing Wire Rope 15 mm including cost of Fixing charges complete in all respect with in all leads and lifts. | 20 | Rmt | 750 ₹15,000 | 725 ₹14,500 | 745 ₹14,900 | 750 ₹15,000 |
| 8.00 | Providing and Fixing Wire Rope Clamps 25 mm including cost of fixing charges complete in all respect with in all leads & lifts. | 25 | Nos | 260 ₹6,500 | 250 ₹6,250 | 255 ₹6,375 | 260 ₹6,500 |
| 9.00 | Providing and Fixing Wire Rope Clamps 15 mm including cost of fixing chargescomplete in all respect with in all leads and lifts. | 10 | Nos | 170 ₹1,700 | 160 ₹1,600 | 180 ₹1,800 | 190 ₹1,900 |
| 10.00 | Providing and Fixing Clamp for holding to pipe 50x6 mm including cost of fixing charges complete in all respect in all leads & lifts. | 18 | Nos | 380 ₹6,840 | 370 ₹6,660 | 400 ₹7,200 | 450 ₹8,100 |
Tender Value
₹9.3 L
EMD Value
₹18,700
Closing Date
20 Nov 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Provision for River Crossing for Rising Main of 80mm dia by constructing Abutment and wire Rope and Dismentalling and Relaying of 80mm dia pipe, Repair and maintenance of Rising main of 80mm dia by cutting and welding
2025_HPIPH_120194_1
12242-341
Open Tender
Miscellaneous Works
90 days
Rana Khad
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹18,700
23 Jan 2026
11 Nov 2025
21 Nov 2025
11 Nov 2025
20 Nov 2025
11 Nov 2025
Amount
Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.
Providing and laying in position cement concrete of specified grade excluding the of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4 sesandi B graded stone aggregate 40mm nominal size in all leads and lifts.
Centeng and shuttering including strutting, propping etc. and removal of form for heights Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. in all leads and lifts.
Providing and laying in position cement concrete of specified grade, excluding the of centering, shuttering, finishing and reinforcement All work up to plinth level 1:2:4 (1 Cement: 2 Coarse sand 4 graded stone aggregate 40 mm normal size) omplete in all leads and lift
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts.
Providing and Fixing Wire Rope 25 mm including cost of Fixing charges complete in all respect with in all leads and lifts.
Providing and Fixing Wire Rope 15 mm including cost of Fixing charges complete in all respect with in all leads and lifts.
Providing and Fixing Wire Rope Clamps 25 mm including cost of fixing charges complete in all respect with in all leads & lifts.
Providing and Fixing Wire Rope Clamps 15 mm including cost of fixing chargescomplete in all respect with in all leads and lifts.
Providing and Fixing Clamp for holding to pipe 50x6 mm including cost of fixing charges complete in all respect in all leads & lifts.
Providing and Fixing MS Plate 6 mm thick 0.45x0.60 including cost of fixing charges complete in all respect in all leads & ligts
Steel work welded in build up sections/framed work, including cutting, hoisting, fing in position and applying a priming coat of approved steel primer using ucural steel etc. as required In gratings, frames, guard bar, ladder, railing, brackets, gates and similar work in all leads and lifts.
Laying, jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of Galvanised mild steel tubes (GI Pipes) of following dia meters confirming to BIS 1239-2001 (latest with upto date amendments) having wall thickness as per code with bevelled/plain ends in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes The laying of pipe will include all operation such as cutting, welding, jointing. fabrication of bends, tees etc, including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The damaged portion of the pipes and specials made form the parent tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). 80 mm dia (MG)
Dismentellesd in tranches galvanised mild Steel tubes 80mm dia nominal dia pipe (earth work to be measured and paid seperately ) The pipe shall be carried from site of work to Sub Divisional store and sagged properly.
Re-Laying, jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of Galvanised mild steel tubes (GI Pipes) of following dia meters confirming to BIS 1239-2001 (latest with upto date amendments) having wall thickness as per code with bevelled/plain ends in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes The laying of pipe will include all operation such as cutting, welding, jointing. fabrication of bends, tees etc, including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The damaged portion of the pipes and specials made form the parent tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). 80 mm Dia (MG)
Manufacturing laying and jointing of GI bensd of Diameters mentioned below (Heavy class) of required degree conforming to relevant specifictions upto dateammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin Charge
Repair of Rising main / Gravity main by Cutting and Welding of GI pipe dimeter mentioned below i.e. By Butt Welding with gas welding two layers including cost of cutting of GI pipe and carriage of Welding Set/DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in -charge in all leads and lifts.
Providing and Fixing Cast Steel Non Return Valve of 80 mm diameter BS 1414/API-600 class ASA - 300 with flange Table - 28 conforming to IS-9001-2000 or latest with upto date ammendments of LEADER / KIRLOSKAR / KILBURN make with nut & bolts, gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect and to the entire satisfaction of the Engineer-in-Charge. 80 mm diameter
GULZARI LAL (BID ID -583806)
Rajesh Kumar (BID ID -583817)
Kashmir Singh (BID ID -583830)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.59 MB
Form6.pdf
Tender Documents • 0.57 MB
Form8.pdf
Tender Documents • 1.05 MB
BOQ_176002.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid