CWE/AF AMB/AMB-40/2023-24 REPAIR AND MAINT TO WOODEN FURNITURES INCLUDING POLISHING FOR AFS AMBALA, RAJPURA, BAKNAUR, KALPI AND PATIALA UNDER GE (AF) AMBALA

Amount

M&L removing carefully the existing unserviceable/damaged parts of Bed Plywood Top(FD-246) and S&F of following new parts/components of required size and shape all as shown in FD drawings:-

S&F ply top made out of 12mm thick commercial plywood of size 1800mm x 900mm BWR ISI marked conforming to IS-303 complete all as specified & directed.

S&F long rail frame of size 35mm x 90mm x 1980mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F head board frame made out of Ist class hardwood with 4mm thick OST plywood (Teak) as per existing shape & size complete all as specified & directed.

S&F foot board frame made out of Ist class hardwood with 4mm thick OST plywood (Teak) as per existing shape & size complete all as specified & directed.

S&F stiffiner to support made out of Ist class Hard Wood (Teak) of size 40mm x 60mm x 880mm complete all as specified & directed.

S&F short rail frame of size 60mm x 60mm x 900mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F Leg of size 60mm x 60mm x 660mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F Flat iron L shape clamp 35mm x 5mm bent to right angle complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Bed Plywood Top to obtain smooth, glossy finish complete all as specified & directed.

M&L removing carefully the existing unserviceable/damaged parts of Chair Wooden Bottom without Arm(FD-285) and S&F of following new parts/components of required size and shape all as shown in FD drawings:-

S&F front leg size of 50mm x 50mm x 445mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear leg of size 40mm x 65mm x 840mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F front rail of size 25mm x 65mm x 415mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear rail of size 25mm x 65mm x 375mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F side rail of size 25mm x 65mm x 400mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F back stiffiner 15mm x 50mm x 375mm long (slightly curved) made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stiffiner of size 20mm x 25mm x 400mm long made out of Ist class Hard Wood (Teak) provided 100mm high from bottom complete all as specified & directed.

S&F seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia preparation to be provide to plywood seat complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Chair Wooden Bottom without Arm to obtain smooth, glossy finish complete all as specified & directed.

M&L removing carefully the existing unserviceable/damaged parts of Chair Dinning(FD-279 & FD-228) and S&F of following new parts/components of required size and shape all as per FD drawings:-

S&F front leg of size 45mm x 45mm x 460mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear leg of size 45mm x 65mm x 890mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stiffiner of size 25mm x 19mm x 400mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F front rail of size 30mm x 65mm x 400mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F reair rail of size 30mm x 65mm x 400mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F side rail of size 30mm x 65mm x 380mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F back stiffiner 15mm x 50mm x 390mm long horizontal rest slightly curve U shape made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Chair Dinning to obtain smooth, glossy finish complete all as specified & directed.

M&L removing carefully the existing unserviceble/damged parts of Chair Easy(FD-229) and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F leg of size 55mm x 25mm x 535mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F arms of size 65mm x 25mm x 610mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F front rails of size 25mm x 70mm x 520mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F side rails of size 25mm x 70mm x 520mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear rail of size 50mm x 25mm x 500mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F back frame of size 55mm x 20mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Chair Easy to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L removing carefully the existing unserviceable/ damaged parts of Chair Writing(FD-280 & FD-250) and S&F of following new parts /components of required size and shape all as per FD drawing:-

S&F front leg of size 55mm x 30mm x 660mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear leg of size 55mm x 30mm x 890mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F arms of size 55mm x 19mm x 495mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rails of size 30mm x 65mm x 490mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stifinner of size 25mm x 20mm x 450mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F back stifinner of size 12mm x 50mm x 445mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Chair Writing to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table with Drawer 900mm x 600mm x 760mm(FD-283), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per drawing:-

S&F table top of size 900mm x 600mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 60mm x 30mm x 740mm high made out of Ist class hard Wood (Teak) complete all specified & directed.

S&F long rail of size 20mm x 60mm x 900mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 20mm x 60mm x 600mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stiffiner of size 25mm x 40mm x 600mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F drawer as per existing shape & size made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F chromium plated knob as per existing size and shape complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table with drawer to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table dinning 6 persons(FD-273), removing carefully the existing unserviceable/damaged parts of Table dining 6 persons and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 1500mm x 900mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 40mm x 75mm x 732mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail 25mm x 100mm x 1500mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail 25mm x 100mm x 900mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F triangular bracket (as support) made out of 2nd class Hard Wood (Teak) as per required shape & size complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table dinning 6 persons to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Peg Table(FD-236 & FD-277), removing carefully the existing unserviceable/damaged parts of peg table and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 450mm x 300mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 30mm x 50mm x 370mm high made out of Ist class Hard Wood (Teak) as per existing size & shape complete all as specified & directed.

S&F top long rail of size 20mm x 40mm x 450mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F top short rail of size 20mm x 40mm x 300mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stiffiner on bottom section to connecting legs in short side complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Peg Table to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table Centre(FD-235 & FD-274), removing carefully the existing unserviceable/damaged parts of table centre and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 900mm x 450mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 60mm x 30mm and 372mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail of size 50mm x 20mm x 900mm long made out ot Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 50mm x 20mm x 450mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table Centre to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape etc complete all as specified & directed.

M&L carrying out repair and replacement of Table without Drawer 900mm x 600mm x 760mm(FD-284), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per drawing:-

S&F top of size 900mm x 600mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 60mm x 30mm x 740mm high made out of Ist class hard Wood (Teak) complete all specified & directed.

S&F long rail of size 20mm x 60mm x 900mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 20mm x 60mm x 600mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F stiffiner of size 25mm x 40mm x 600mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table without Drawer to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Teapoy(FD-278), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F teapoy top of size 600mm x 450mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 60mm x 30mm x 532mm high made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail of size 20mm x 60mm x 600mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 20mm x 60mm x 450mm long made out of Ist class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Teapoy to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table Writing(FD-275), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing :-

S&F table top of size 1175mm x 600mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 35mm x 55mm x 732mm high made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F top long rail of size 25mm x 50mm x 732mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F top short rail of size 25mm x 50mm x 600mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F bottom rail (side stiffner) 20mm x 50mm x 355mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F foot rest (side stiffner) 20mm x 50mm x 1145mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F drawer as per existing shape & size complete all as specified & directed.

S&F back of table writing of size 355mm x 732mm made out of 6mm thick BWR grade ply wood complete all as specified & directed.

S&F door of cupboard as per existing size & shape made out of 18mm thick Prelaminated Particle Board beaded all around with Teak Wood beading complete all as specified & directed.

S&F brass hinges 50mm long complete all as specified & directed.

S&F chromium plated knob as per existing size and shape complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table Writing to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table dressing Gents with Mirror(FD-230), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 900mm x 300mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F bottom partition using 18/19mm thick block board ISI Marked, commercial of size 900mm x 300mm complete all as specified & directed.

S&F drawer as per existing shape & size complete all as specified & directed.

S&F Mirror 5mm thick with frame of Teak wood (MP Teak), size 410mm x 790mm and shape as per drawing complete all as specified & directed.

M&L preparation of wooden surfaces and applying two coats of french polish (ready made) to article after necessary preparation of surfaces complete all as specified & directed.

S&F Knob CP for drawer as per existing size and shape complete all as specified & directed.

S&F MS keyplate as existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table Dining 4 Persons 1200mm x 900mm (FD/MAP-II/03), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 1200mm x 900mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 90mm x 45mm x 750mm high made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail of size 45mm x 90mm x 1200mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F Short rail of size 45mm x 90mm x 900mm long made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F Stiffiner of size 90mm x 25mm x 900mm made out of 2nd class Hard Wood (Teak) complete all as specified & directed.

S&F triangular bracket (as support) made out of 2nd class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table Dinning 6 persons to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair and replacement of Table dinning 8 Persons(FD-273), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F table top of size 1800mm x 900mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 40mm x 75mm x 732mm made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail of size 25mm x 100mm x 1800mm made out Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 25mm x 100mm x 900mm made out Ist class Hard Wood (Teak) as per required shape & size complete all as specified & directed.

S&F triangular bracket (as support) made out of 2nd class Hard Wood (Teak) complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table Dinning 8 Persons to obtain smooth, glossy finish complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair/replacement of Sofa Set 5 Seater / 4 Seater (FD-281) and S&F of following new parts all as per FD drawing:-

S&F long rails of seat for three seater sofa of size 1590mm x 100mm x 35mm of Ist class hardwood (teak) duly plained and smoothed with sand paper complete all as specified & directed.

S&F side rails of seat for three seater sofa of size 575mm x 100mm x 35mm of Ist class hardwood (teak) duly plained and smoothed with sand paper complete all as specified & directed.

S&F long rails of back for three seater sofa of size 1590mm x 100mm x 35mm of Ist class hardwood (teak) duly plained and smoothed with sand paper complete all as specified & directed.

S&F long rails of seat for single seater sofa of size 590mm x 100mm x 35mm of Ist class Hard Wood (Teak) duly plained and smoothened with sand paper complete all as specified & directed.

S&F side rails of seat for single seater sofa of size 575mm x 100mm x 35mm of Ist class Hard Wood (Teak) duly plained and smoothened with sand paper complete all as specified & directed.

S&F long rails of back for single seater sofa of size 590mm x 100mm x 35mm of Ist class Hard Wood (Teak) duly plained and smoothened with sand paper complete all as specified & directed.

S&F batten for single seater sofa of size50mm x 20mm x 525mm of Ist class Hard Wood (Teak) duly plained and smoothened with sand paper complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Sofa Three Seater to obtain smooth, glossy finish complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Sofa Single Seater to obtain smooth, glossy finish complete all as specified & directed.

M&L carrying out repair and replacement of Table Bed Side(FD-276), removing carefully the existing unserviceable/damaged parts S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F of top 18mm thick BWR grade plywood of size 230mm x 450mm fixed with 1.0mm thick laminated sheet at top complete all as specified & directed.

S&F of side 18mm thick BWR grade plywood of size 230mm x 510mm fixed with 1.0mm thick laminated sheet at top complete all as specified & directed.

S&F of shelves 12mm thick BWR grade plywood of size 230mm x 450mm complete all as specified & directed.

S&F backply 6mm thick BWR grade of size 510mm x 450mm complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table Bed Side to obtain smooth, glossy finish complete all as specified & directed.

M&L carrying out repair/replacement of Chair Dinning Cushioned (FD/E6/MAP/10) S&F of following new parts all as per FD drawing:-

S&F front leg of size 350mm x 50mm x 35mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear leg of size 35mm x 50mm x 950mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F side rail of size 25mm x 65mm x 450mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F front rail of size 25mm x 65mm x 450mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F rear rail of size 25mm x 65mm x 450mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F Stiffener of size 20mm x 25mm x 450mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F seat made out of high density foam cushion 75mm thick and 40 density thick duly covered with tapestry cloth as sample approved by GE complete all as specified & directed.

S&F rubber shoes best quality as per existing size and shape complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Chair Dinning to obtain smooth, glossy finish complete all as specified & directed.

M&L carrying out repair and replacement of Table Dressing Ladies (FD-251) and S&F of following new parts all as per FD drawing:-

S&F top of size 900mm x 380mm made out of 18/19mm thick pre laminated particle board interior grade both side decorated finish and 4mm thick teak wood edging all around the top complete all as specified & directed.

S&F leg of size 45mm x 45mm x 75mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F long rail of size 40mm x 25mm x 900mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F short rail of size 40mm x 25mm x 380mm made out of Ist class Hard Wood (Teak) complete all as specified & directed.

S&F drawer as per existing shape and size complete all as specified & directed.

S&F Knob CP as per size & shape complete all as specified & directed.

S&F telescopic channel for drawer as per existing size and shape complete all as specified & directed.

S&F mirror of size 360mm x 1220mm with Ist class Hard Wood (Teak) frame all around complete as per drawing complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Table dressing ladies to obtain smooth, glossy finish complete all as specified & directed.

M&L recanning of following types of chair with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej Patern using including removing of old broken cane complete all as specified & directed.

Chair Dinning (FD-228)

Chair Easy (FD-17 M) & (FD-229)

Chair Writing (FD-250)

Stool Dressing CB (FD-252)

M&L carrying out repair and replacement of Side Board(FD-241), removing carefully the existing unserviceable /damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

S&F Top made out of 18mm thick size 1200mm x 450mm prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, ISI marked fixed with mild screws as per size and shape including 4mm thick teak wood beading all around complete all as specified & directed.

S&F Side 18mm thick plywood BWR of size 455mm x 625mm complete all as specified & directed

S&F Back 6mm thick plywood BWR of size 1220mm x 625mm complete all as specified & directed

M&L Drawers as per drawing complete all as specified & directed.

M&L Door of size 585mm x 835mm x 18mm BWR plywood complete all as specified & directed.

M&L Shelves of size 455mm x 835mm x 18mm thick BWR plywood complete all as specified & directed.

M&L Leg of size 45mm x 45mm at top 25mm x 25mm at bottom made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F long rail size of 25mm x 45mm made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F short rail size of 25mm x 45mm made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F Knob, Chromium plated complete all as specified & directed

M&L preparation of wooden surfaces and applying one coat french polish to Side Board to obtain smooth, glossy finish complete all as specified & directed.

M&L carrying out repair and replacement of Table Bed Side (FD/E6/MAP/15R), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing:-

M&L Leg made out of 18mm MS square pipe of 18 guage as per existing shape and size duly painted with black enamel paint complete all as specified & directed.

M&L Top made out of 18mm thick prelaminated partical board of size 450mm x 450mm including PVC edging alroung of top complete all as specified & directed.

M&L Side made out of 18mm thick prelaminated particle board of size 500mm x 450mm complete all as specified & directed.

M&L Front shutter made out of 18mm thick prelaminated partical board of size 400mm x 300mm complete all as specified & directed.

M&L Bottom made out of 18mm thick prelaminated partical board of size 450mm x 450mm complete all as specified & directed.

M&L Back made out of 18mm thick prelaminated partical board of size 600mm x 450mm complete all as specified & directed.

M&L Drawers as per existing shape and size complete all as specified & directed.

M&L Telescopic channel for drawer as per exsiting size and shape complete all as specified & directed.

M&L Auto closure hinges as per existing pattern complete all as specified & directed.

M&L Handle CP for drawer and shutter complete all as specified & directed.

S&F plastic rubber shoe white/black best quality as per existing size and shape complete all as specified & directed.

M&L carrying out repair/repalcement of Chair Writing Cushioned (FD/E6/MAP/12) and S&F of following new parts all as per FD drawing:-

S&F 50mm thick high density foam cushion for seat of size 425mm x 400mm, edges trimmed all as shown on drawing duly covered with good quality tapestry cloth complete all as specified & directed.

S&F 50mm thick high density foam cushion for back including 6mm thick foam cushion (HD) lining on back side of chair writing complete all as specified & directed.

S&F of seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425mm x 400mm complete all as specified & directed.

S&F of back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400mm x 300mm complete all as specified & directed.

S&F of handle as per exisitng size and shape (as per sample) complete all as specified & directed.

M&L Point welding to various parts as required complete all as specified & directed.

M&L applying one coat of Ist quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface on existing frame work of Chair Writing complete all as specified & directed.

S&F cushion 32 density, 100mm thick of size 530mm x 560mm covered with tapestry cloth as approved by GE complete all as specified & directed.

M&L carrying out repair/replacement of Hat Stand with Mirror (FD-233) and S&F of following new parts all as per FD drawing:-

S&F 4mm teak wood ply of size 1330mm x 710mm for fornt size complete all as specified & directed

S&F 6mm ply for the back side of size 1330mm x 710mm complete all as specified & directed.

S&F 5mm thick looking mirror as per appropriate shape and size complete all as specified & directed.

S&F peg chromium plated complete all as specified & directed.

M&L preparation of wooden surfaces and applying one coat french polish to Hat Stand to obtain smooth, glossy finish complete all as specified & directed.

M&L carrying out repair and replacement of Bin Soild Linen Multi purpose( FD-1104 & FD/E6/MAP/09), removing carefully the existing unserviceable/damaged parts and S&F of following new parts/components of required size and shape all as per FD drawing.

M&L Top made out of 18mm thick prelaminated partical board exterior grade, phenyl formaoldehyde bonded, flat pressed three layer BWR type-II, ISI marked fixed with mild screws as per size and shape including 4mm thick teak wood beading all around complete all as specified & directed

M&L Side 18mm thick prelaminated particle board of size 455mm x 625mm complete all as specified & directed

M&L Back 6mm thick plywood BWR of size 1220mm x 625mm complete all as specified & directed

M&L Drawers as per drawing complete all as specified & directed.

M&L Door of size 585mm x 835mm, 18mm thick prelaminated particle board complete all as specified & directed.

M&L Shelves of size 455mm x 835mm, 18mm thick prelaminated particle board complete all as specified & directed.

M&l Leg of size 45mm x 45mm at top 25mm x 25mm at bottom made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F long rail size of 25mm x 45mm made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F short rail size of 25mm x 45mm made out of Ist class Hard Wood (Teak) complete all as specified & directed

S&F Knob chromium plated complete all as specified & directed

M&L preparation of wooden surfaces and applying one coat french polish to Bin Solid Linen Multipurpose to obtain smooth, glossy finish complete all as specified & directed.

For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum.

Daya Nand Jindal

Janeshwar Dass Narender Kumar Jain

Anil jindal and sons