Revamping and standardisation of Existing Fire Fighting System at medical college Hospital (A to E blocks, 400 Bedded Ward and Surgery Block), Thrissur.

Amount

fire fighting

od114812/2019_2020 : General servicing including overhauling complete greasing the bearings, impregnating the winding with best quality insulating varnish checking connections and making the motor pump set in good working condition complete including painting with suitable paint of Electric motor driven main pump of capacity 125 HP

od119461/2019_2020 : General servicing, maintenance of Diesel Engine 125 HP including dismantling overhauling cleaning ,greasing checking alignments,changing of gland packing,diesel filter ,packing ,Engine oil,fuel pump reconditioning etc.complete and making the Unit in good working condition including painting with suitable paint complete.

od114814/2019_2020 : General servicing including overhauling complete greasing the bearings, impregnating the winding with best quality insulating varnish checking connections and making the motor pump set in good working condition complete including painting with suitable paint of Electric motor driven main pump of capacity 75 HP (sprinkler pump)

od114816/2019_2020 : General servicing including overhauling complete greasing the bearings, impregnating the winding with best quality insulating varnish checking connections and making the motor pump set in good working condition complete including painting with suitable paint of Electric motor driven main pump of capacity 10 hp (Jockey Pump)

od114818/2019_2020 : General service and maintenance of sluice valve valve including greasing etc.complete and making it in good working condition.

od114820/2019_2020 : General service and maintenance of Gate valve, Butterfly valve, hydrant valve, non return valve etc. including cleaning greasing etc. complete fore sizes not less that 80 mm dia and not greater than 150mm dia

od114826/2019_2020 : General service and maintenance of hose box checking replacing broken glass if any and painting etc.complete

od114828/2019_2020 : General service and maintenance of hose reel checking the existing hose, painting the unit etc. complete

od114836/2019_2020 : General service of manual call point including replacement of damaged parts etc.

od114838/2019_2020 : General service of hooter including replacement of damaged parts etc complete

od114840/2019_2020 : General service of Smoke & heat detector checking connections, cleaning and making the unit in good working condition.

od114842/2019_2020 : General service of fire alarm panel conventional type including checking all connections replacement of damaged parts, indicators if any and making the same in good working condition.

od119110/2019_2020 : Supply & erection of CI Sluice valve 150mm dia with all accessories (IS -780 PN -1.0 & PN -1.6)

od3984/2020_2021 : Hydrant valve - Supply, installation, testing and commissioning of instances pattern stain less steel single Headed Hydrant valve bearing to IS:5290,63mm oblique type with instantaneous hose coupling adaptor, complete with PVC blank cap single

od3986/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 150mm dia

od3988/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 25mm Dia

od3990/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 32mm Dia

od3992/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 40mm Dia

od3994/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 50mm Dia

od3996/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 65mm Dia

od8411/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 80mm Dia

od3998/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 150mm Dia

od4000/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 100mm Dia

od9209/2020_2021 : Above Ground / Under Ground Piping:- Supply, and commissioning of M.S 'C' class pipes confirming to IS:1239 part I with malleable specials confirming to IS.1239 part.II, such as elbows, reducers, flanges etc. including cutting, welding, fixing in/on walls/ceiling by suitable, supports. The pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour/shade. 200 mm Dia

od116098/2019_2020 : Providing and fixing horizontal type 150mm cast iron double flanged Non -return valve of approved quality conforming to IS with bolts, nuts, washers, 3mm thick insertion rubber gaskets complete. as reqd.

od117459/2019_2020 : Supplying , fixing, testing and commissioning of 200mm size Foot valve bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS as required.

od117461/2019_2020 : Supplying , fixing, testing and commissioning of 150mm size Foot valve bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS as required.

od8439/2020_2021 : SITC of Branch Pipe 63mm dia

od8413/2020_2021 : Fire Hose :- Supply, installation, testing and commissioning of Re-inforced rubber lined hose conforming to IS: 636, 63mm dia. with ISI mark 15m long and fitted with instantaneous type couplings on both ends, made of Gun metal. (Firex / Newage / CRC / Zenith)

od8415/2020_2021 : Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe

od8423/2020_2021 : Hose cabinet:- Supply and fixing of weather proof Hose cabinet having the size of 750 x 500 x 250mm made of 16 gauge M.S sheet with PCC supports and full front glass door and locking arrangements suitable to accommodate 2 Nos 15m long hose pipes and 1 No. branch pipe. The cabinet shall be painted to scarlet red colour Double

od8417/2020_2021 : Ball valve-Supply, installation, testing and commissioning of C.I. slim seal type ball valve with required flanges, nuts and bolts gasket etc. complete 25mm dia

od8419/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 80mm dia

od8421/2020_2021 : Butterfly valve - Supplying, installing, testing and commissioning CI Butterfly valve slim seal standard lever operated, wafer type, SG iron coated with nylon Disk, SS shaft, Nitrile Body lining . PN 16 rating. Design as per BS 51 confirming IS 13039 with required flanges nuts, bolts. 100mm dia

od116769/2019_2020 : BALL VALVE:- Supplying , fixing, testing and commissioning of 20mm ball valve bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

od119136/2019_2020 : Supply and erection of hydrant valve coupling

od119138/2019_2020 : supply and erection of hydrant valve Lug

od119140/2019_2020 : supply and replacement of damaged hydrant valve wheel with new one

od119160/2019_2020 : Supply and erection of 19/20 mm dia Thermoplastic hose of 30 mtr for hose reel

od116763/2019_2020 : PRESSURE GAUGE:-Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.

od116765/2019_2020 : PRESSURE SWITCH:- Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F), phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.

od116767/2019_2020 : AIR RELEASE VALVE:- Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia

od8425/2020_2021 : Supply, installation, testing and commissioning of Electric Hooter as required

od8427/2020_2021 : Supply, installation, testing and commissioning of manual call point break glass type as per standard specification.

od8429/2020_2021 : Supplying, installing, testing and commissioning of optical type smoke detectors with solid stage design, indicating lamp, mounting base etc

od10337/2020_2021 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure

od10341/2020_2021 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 core 1.5 sq mm with factory made clamp

od8431/2020_2021 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Pendent type

od8433/2020_2021 : SPRINKLER BULB :- Supply, installation, testing and commissioning of sprinkler Bulb,20mm dia, 68 degree Celsius Sidewall type

od116824/2019_2020 : Supply Installation, testing and commissioning of 12Volt 7AH Battery

od119443/2019_2020 : Charges for dismantling damaged pipe and convey them back to store

od10323/2020_2021 : Supply, erection, testing and commissioning of Coaxial RG 6 PVC iunsulated Cable as per BIS standard

od10325/2020_2021 : Supply, erection, testing and commissioning of Talk back field device .

od10327/2020_2021 : Supply, erection, testing and commissioning of 6 Watt Wall mounted type Speaker for PA System.

od10329/2020_2021 : Supply & erecion of MICROPHONE for Intelligible, crisp and bright sound suitable for all type of PA applications. Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. Twin core shielded low noise cable.

od10331/2020_2021 : Supply, Installation, Testing and Commissioning of solid state Amplifier of 60W RMS out put in rack, including necessory control wires, jacks etc. complete as required

od10335/2020_2021 : Supply,installation,testing and commissioning of Fire Brigade inlet connection with 4 Nos. of 63 mm dia built in Gun metal Non-return valves instantaneous coupling type arranged on 100 mm dia etc. Pipe manifold shall be connected to wet riser main.

90.6.5.4 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.50 sq mm

90.6.5.18 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 1.50 sq mm

od116953/2019_2020 : Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for each floor 12" x 4" (appropriate places)

od116955/2019_2020 : Supply & erection of Assembly Point sign board 16" x 16"

od116965/2019_2020 : Supply & erection of Fire Escape rout in each floor having size 12" x 16" made of 3mm thisk acrylic sheet with glass frame

od8435/2020_2021 : Copying charges of Electrical/fire Drawing per A3 sheet additional copies

od8437/2020_2021 : Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

od119184/2019_2020 : Supply, installation, testing and commissioning of 12V 150AH tubular battery including providing inter connection etc. as required (Exide express or equivalent make). and buy back the existing Damaged Battery

14.2 : Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

14.7 : Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11 : Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Bidder Name

RAYAN FIRE PROTECTION SYSTEMS