Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.1 LAccepted-AOC | ₹96.1 L Quoted ₹96.6 L | L1 | Accepted-AOC LOWEST REASONABLE BID |
| 2 | L2₹98.6 L+₹2.0 L (2.03%)Rejected-Finance N A | ₹98.6 L+₹2.0 L (2.03%) | L2 | Rejected-Finance NOT LOWEST |
| 3 | L3₹1.1 Cr+₹10.7 L (11.0%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | ₹1.1 Cr+₹10.7 L (11.0%) | L3 | Rejected-Finance NOT LOWEST |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Eligible bidder being two class below the eligible class. |
| Sl No | Description | Qty | Unit | M/s J B Construction Company L1 | SKYLIGHT INNOVATIONS L2 | M/S Tanisha Traders L3 |
|---|---|---|---|---|---|---|
| 1.00 | Segregating the repairable charpoy GI pipe at furniture yard of BSO (Army) No 1 Jodhpur and removing unserviceable nylon newar from Charpoy GI pipe (FD-220), tightening loose components of the complete charpoys and supplying and fixing 12 mm thick BWP grade ISI marked plywood conforming to IS:710 [Make: Greenply Gold 2.0 / Archid Ply Gold / Century Ply –(Architect Ply)] of required size (cut from 7' x 3' sheet) with 10 Nos stainless steel (304 grade) half-round top nut and bolt of size 50 mm length and 6 mm dia, including 3 Nos stiffeners made out of MS flat iron of size 900 mm (L) x 50 mm (W) x 6 mm (T) and 4 Nos MS flat iron of size 75 mm (L) x 25 mm (W) x 6 mm (T), duly painted with two coats of silver colour synthetic enamel paint over one coat of red oxide primer after proper surface preparation. All edges shall be properly rounded.complete all as specified and directed by Engr-in-Charge. | 1,137 | Each | 2,645 ₹30,07,365 Lowest | 2,890 ₹32,85,930 | 3,000 ₹34,11,000 |
| 2.00 | Removing unserviceable long rail of Charpoy GI pipe and supplying and fixing new long rail of 32 mm dia medium grade GI pipe (Make: TATA / JINDAL / SAIL) threaded at both ends, complete as shown on drawing and complete all as specified and directed by Engr-in-Charge (FD-220). | 500 | Each | 545 ₹2,72,500 | 250 ₹1,25,000 Lowest | 600 ₹3,00,000 |
| 3.00 | Converting retrieved unserviceable long rail into two short rails duly threaded (two from each long rail) as per drawing and replacing the same with existing unserviceable short rail of Charpoy GI pipe, complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 500 | Each | 45 ₹22,500 | 25 ₹12,500 Lowest | 60 ₹30,000 |
| 4.00 | Converting legs from retrieved unserviceable short rails duly threaded (two from each short rail) and supplying and fixing MS clamp for MNF set and replacing the same with existing unserviceable leg in Charpoy GI pipe, including supply and welding of 3 mm thick MS plain black sheet, 40 mm dia round shape at the bottom of leg duly painted in silver colour, complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 500 | Each | 75 ₹37,500 | 25 ₹12,500 Lowest | 80 ₹40,000 |
| 5.00 | Removing existing unserviceable elbow of Charpoy GI pipe and supplying and fixing new 32 mm 3-way GI elbow (Make: Zoloto / Unik / DRP) complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 1,000 | Each | 115 ₹1,15,000 | 75 ₹75,000 Lowest | 150 ₹1,50,000 |
| 6.00 | Removing existing unserviceable check nut from Charpoy GI pipe and supplying and fixing new GI check nut of 32 mm (Make: Zoloto / Unik / DRP) complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 1,200 | Each | 25 ₹30,000 | 50 ₹60,000 | 20 ₹24,000 Lowest |
| 7.00 | Charpoy GI pipe (FD-220) : M&L for applying one coat of synthetic enamel paint (Silver colour) shade approved by Engr-in-Charge/ GE by spray painting after preparation of surface by cleaning & washing of GI Pipe throughly complete all as specified and directed by Engr-in-Charge. | 2,937 | Each | 145 ₹4,25,865 | 50 ₹1,46,850 Lowest | 200 ₹5,87,400 |
| 8.00 | Removing unserviceable plywood from Charpoy GI pipe (FD-220), tightening loose components of the complete charpoy and supplying and fixing 12 mm thick BWP grade ISI marked plywood conforming to IS:710 [Make: Greenply Gold 2.0 / Archid Ply Gold / Century Ply –(Architect Ply)] of required size (cut from 7' x 3' sheet) with 10 Nos stainless steel (304 grade) half-round top nut and bolt of size 50 mm length and 6 mm dia complete all as specified and directed by Engr-in-Charge. | 1,800 | Each | 2,545 ₹45,81,000 Lowest | 2,890 ₹52,02,000 | 2,900 ₹52,20,000 |
| 9.00 | CHAIR STEEL TUBULAR WITH ARMS (FD-75(M)) | - | - | - | - | - |
| 9.01 | M&L for removal of unsv seat & back of chair, S&F of seat and back of chair with new seat of 12mm thick BWR plywood (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth irrespective of what is shown on drg. The back shall be of 12 mm thick BWR plywood (ISI marked) fixed to frame with screw and covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and directed by Engr-in-Charge (Note :- The tapestry cloth shall be of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.) | 500 | Each | 1,245 ₹6,22,500 | 400 ₹2,00,000 Lowest | 1,000 ₹5,00,000 |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
25 Jul 2026, 6:00 pmClosed
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
REPAIR TO CHARPOY BY REPLACEMENT OF NYLON NEWAR WITH PLYWOOD TOP AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01
2026_MES_767650_1
CWE (A) JODH/GE (A) NO. 01- OF 2026-27(82627/48/E8)
Open Tender
Miscellaneous Works
Item Rate
270 days
JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (ARMY) NO. 01 JODHPUR
₹1.6 L
Yes
27 Aug 2026
25 May 2026
27 Jul 2026
25 May 2026
25 Jul 2026
11 Jul 2026
25 May 2026 - 15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Segregating the repairable charpoy GI pipe at furniture yard of BSO (Army) No 1 Jodhpur and removing unserviceable nylon newar from Charpoy GI pipe (FD-220), tightening loose components of the complete charpoys and supplying and fixing 12 mm thick BWP grade ISI marked plywood conforming to IS:710 of required size (cut from 7' x 3' sheet) with 10 Nos stainless steel (304 grade) half-round top nut and bolt of size 50 mm length and 6 mm dia, including 3 Nos stiffeners made out of MS flat iron of size 900 mm (L) x 50 mm (W) x 6 mm (T) and 4 Nos MS flat iron of size 75 mm (L) x 25 mm (W) x 6 mm (T), duly painted with two coats of silver colour synthetic enamel paint over one coat of red oxide primer after proper surface preparation. All edges shall be properly rounded.complete all as specified and directed by Engr-in-Charge. | 1,137 | Each | 31,00,000 | ₹3,52,47,00,000 |
| - | Removing unserviceable long rail of Charpoy GI pipe and supplying and fixing new long rail of 32 mm dia medium grade GI pipe threaded at both ends, complete as shown on drawing and complete all as specified and directed by Engr-in-Charge (FD-220). | 500 | Each | 31,00,000 | ₹1,55,00,00,000 |
| - | Converting retrieved unserviceable long rail into two short rails duly threaded (two from each long rail) as per drawing and replacing the same with existing unserviceable short rail of Charpoy GI pipe, complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 500 | Each | 31,00,000 | ₹1,55,00,00,000 |
| - | Converting legs from retrieved unserviceable short rails duly threaded (two from each short rail) and supplying and fixing MS clamp for MNF set and replacing the same with existing unserviceable leg in Charpoy GI pipe, including supply and welding of 3 mm thick MS plain black sheet, 40 mm dia round shape at the bottom of leg duly painted in silver colour, complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 500 | Each | 31,00,000 | ₹1,55,00,00,000 |
| - | Removing existing unserviceable elbow of Charpoy GI pipe and supplying and fixing new 32 mm 3-way GI elbow complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 1,000 | Each | 31,00,000 | ₹3,10,00,00,000 |
| - | Removing existing unserviceable check nut from Charpoy GI pipe and supplying and fixing new GI check nut of 32 mm complete as shown on drawing and as directed by Engineer-in-Charge (FD-220). | 1,200 | Each | 31,00,000 | ₹3,72,00,00,000 |
| - | Charpoy GI pipe (FD-220) : M&L for applying one coat of synthetic enamel paint (Silver colour) shade approved by Engr-in-Charge/ GE by spray painting after preparation of surface by cleaning & washing of GI Pipe throughly complete all as specified and directed by Engr-in-Charge. | 2,937 | Each | 31,00,000 | ₹9,10,47,00,000 |
| - | Removing unserviceable plywood from Charpoy GI pipe (FD-220), tightening loose components of the complete charpoy and supplying and fixing 12 mm thick BWP grade ISI marked plywood conforming to IS:710 of required size (cut from 7' x 3' sheet) with 10 Nos stainless steel (304 grade) half-round top nut and bolt of size 50 mm length and 6 mm dia complete all as specified and directed by Engr-in-Charge. | 1,800 | Each | 31,00,000 | ₹5,58,00,00,000 |
| - | CHAIR STEEL TUBULAR WITH ARMS (FD-75(M)) | - | - | 31,00,000 | - |
| - | M&L for removal of unsv seat & back of chair, S&F of seat and back of chair with new seat of 12mm thick BWR plywood (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth irrespective of what is shown on drg. The back shall be of 12 mm thick BWR plywood (ISI marked) fixed to frame with screw and covered with 50 mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and directed by Engr-in-Charge (Note :- The tapestry cloth shall be of rate ranging between Rs. 150/- to Rs. 175/- per meter and as per sample approved by GE.) | 500 | Each | 31,00,000 | ₹1,55,00,00,000 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
TENDER48.pdf
Tender Documents • 0.43 MB
BOQ_859696.xls
BOQ • 2.76 MB
corrigendumno04-82627-48-E8.pdf
PDF • 0.10 MB
corrigendumno03-82627-48-E8.pdf
PDF • 0.10 MB
corrigendumno02-82627-48-E8.pdf
PDF • 0.10 MB
corrigendumno01-82627-48-E8.pdf
PDF • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .