REPAIR TO SERVO STABILIZER, APFC PANEL AND CONNECTED WORKS AT AF STN PHALODI

Amount

M&L for repair to existing automatic / manual type APFC panel, cleaning of dust inside the panel from electric blower, cleaning of contractor relay, junction point/ connection, sevicing overhouling of cooling fan complete testing of APFC relay including necessary setting with CT load adjustment to match of 50 KVAR to 500 KVAR to set the power factor in range between 0.96 to 0.99 complete all as per specified and directed. Note:- (a) Replacement of u/s item will be measured & paid separetely under respective item of schedule . (b) The cost of replacement of minor item /spares deemed to be included in unit quoted rate.

S&F in repair of contactor capacitor duty type 3 pole AC of capacity having coil voltage 250 volt up to suitable for 20 KVAR alongwith 1 NO + 1 NC auxilary contact complete all as per specified and directed.

S&F in repair of contactor capacitor duty type 3 pole AC of capacity having coil voltage 250 volt up to suitable for 25 KVAR alongwith 1 NO + 1 NC auxilary contact complete all as per specified and directed.

S&F in repair of APFC /AIPFC relay source type with protection device intelligent automatic processor has on power controller unit up to 8 stage complete all as per specified and directed.

S&F in repair of APFC /AIPFC relay source type with protection device intelligent automatic processor has on power controller unit up to 12 stage complete all as per specified and directed.

S&F in repair of capacitor 3 phase 440 volt 50 Hz & APP type electric to ISS 13340 /13341 to ICC 9311 complete of capacity 5 KVAR (bottle type) gas filled complete all as per specified and directed.

S&F in repair of capacitor 3 phase 440 volt 50 Hz & APP type electric to ISS 13340 /13341 to ICC 9311 complete of capacity 10 KVAR (bottle type) gas filled complete all as per specified and directed.

S&F in repair of capacitor 3 phase 440 volt 50 Hz & APP type electric to ISS 13340 /13341 to ICC 9311 complete of capacity 12.5 KVAR (bottle type) gas filled complete all as per specified and directed.

S&F in repair of capacitor 3 phase 440 volt 50 Hz & APP type electric to ISS 13340 /13341 to ICC 9311 complete of capacity 15 KVAR (bottle type) gas filled complete all as per specified and directed.

S&F in repair of capacitor 3 phase 440 volt 50 Hz & APP type electric to ISS 13340 /13341 to ICC 9311 complete of capacity 25 KVAR (bottle type) gas filled complete all as per specified and directed.

S&F in repair of volt meter 0 -500 volt digital type square 96 sq mm lamp accurracy glass -1 complete all as per specified and directed.

S&F in repair of Ammeter 0 -200 Amp digital type square 96 sq mm lamp accurracy glass -1 complete all as per specified and directed.

S&F in repair of CT coil suitable for Amp meter 100 /5 Amp complete all as per specified and directed.

S&F in repair of indicating lamp set RYB for phase indication operating 240 volt 50 HZ AC with new one LED panel mounting type complete to match existing one complete all as per specified and directed.

S&F in repair main incoming single core FR round PVC Insulated Industrial Grade Copper Conductor 10 Sqmm (Unsheathed) Flexible Cables, 1100 Volts, conforming to IS: 694 complete all as per specified and directed.

S&F in repair MCB SP 10 KA C curve type of capacity 06 to 10 Amp complete all as per specified and directed.

S&F in repair isolator TP 415 volt 10 KA C curve type of capacity 100 Amps complete all as per specified and directed.

S&F in repair Isolator TP 415 volt 10 KA C curve type of capacity 63 Amps complete all as per specified and directed.

S&F in repair Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 630 Amps, 50 KA rating,Ics=75% Icu ,415 volts AC complete all as per specified and directed.

S&F in repair Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 400 Amps, 36 KA rating,Ics=75% Icu ,415 volts AC complete all as per specified and directed.

S&F in repair Togal Switch suitable for 3 Phase Voltage Stabilizer complete all as per specified and directed.

Labour and T&P for shifting after disconnecting/dismantling primary & secondary connection carefully of servo voltage stablizer out door/indoor type complete of capacity 50 KVA to 300 KVA from its foundation and safely shifting one place to another place where directed by Engineer-in-charge and reconnection of cabling ,earthing ,instalation, testing and commissoning of the servo voltage stablizer complete all as per specified and directed. Note:- Cost of Necessary tools and plants such as Vehicle, hydra/Crane etc deemed to be included in the unit quoted rate .

M&L for servo stabilizer extrenally spray painting with one coat of synthetic enamel paint of grey colour after cleaning surface throughly with thinner and scrapper and preparing the surface to required standard including writing and making such as MES No on the body of servo stabilizer of capacity upto 75 KVA complete all as per specified and directed.

M&L for servo stabilizer extrenally spray painting with one coat of synthetic enamel paint of grey colour after cleaning surface throughly with thinner and scrapper and preparing the surface to required standard including writing and making such as MES No on the body of servo stabilizer of caapacity 100 KVA to 300 KVA complete all as per specified and directed.

M&L for complete servicing of working/non working existing servo voltage stabilizer automatic operation three phase of various makes & capacity exceeding 16 KVA but not exceeding 75 KVA at different locations by dismantling / opening the stabilizer for checking the parts/components, circuit for proper functioning, cleaning inside the stabilizer, replacement of defective minor items i,e. screws, lugs, cut out/fuses etc., reassembling the stabilizer, testing on rated equipment load for automatic operation to stabilizer standard out put voltage, complete all as per specified and directed. Note:- (i) Cost of Necessary tools and plants such as Vehicle, hydra/Crane etc deemed to be included in the unit quoted rate. (ii) Any spare part of stabilizer if found defective will be measured & paid as S&F under respective item of this Sch.

M&L for complete servicing of working/non working existing servo voltage stabilizer automatic operation three phase of various makes & capacity exceeding 100 KVA but not exceeding 300 KVA at different locations by dismantling / opening the stabilizer for checking the parts/components, circuit for proper functioning, cleaning inside the stabilizer, replacement of defective minor items i,e. screws, lugs, cut out/fuses etc., reassembling the stabilizer, testing on rated equipment load for automatic operation to stabilizer standard out put voltage, complete all as per specified and directed. Note:- (i) Cost of Necessary tools and plants such as Vehicle, hydra/Crane etc deemed to be included in the unit quoted rate. (ii) Any spare part of stabilizer if found defective will be measured & paid as S&F under respective item of this Sch.

S&F in repair of push button switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of Auto manual switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S & F in repair of Micro switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of PCB holder as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of Carbon bush as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of Carbon bush holder as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of Trigger transformer as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair of Shunt coil, 220 Volt, AC, as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed.

S&F in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer 16 KVA to 40/50 KVA capacity of various make with high & low voltage cutout device but excluding ICS, complete all as per specified and directed.

S&F in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer 40 KVA to 75 KVA capacity of various make with high & low voltage cutout device but excluding ICS, complete all as per specified and directed.

S&F in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer 100 KVA capacity of various make with high & low voltage cutout device but excluding ICS, complete all as per specified and directed.

S&F in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer 150/160 KVA capacity of various make with high & low voltage cutout device but excluding ICS, complete all as per specified and directed.

S&F in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer 200 KVA to 300 KVA capacity of various make with high & low voltage cutout device but excluding ICS, complete all as per specified and directed.

S&F in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,20 to 40 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,50 to 75 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,100 to 150 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Control circuit Low/high Cut off with relay suitable for 3 Phase Voltage Stabilizer ,40 to 60 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Control circuit Low/high Cut off with relay suitable for 3 Phase Voltage Stabilizer ,75 to 300 KVA, 415 V, 50 Hz, complete all as per specified and directed.

S&F in repair Gas Ket Sets suitable for 3 Phase Voltage Stabilizer complete all as per specified and directed.

S&F in repair gear and driver assembly of capacity exceeding 50 KVA but not exceeding 100 KVA per phase of servo vloltage stabilizer complete all as per specified and directed.

S&F in repair gear and driver assembly capacity exceeding 100 KVA but not exceeding 300 KVA per phase of servo vloltage stabilizer complete all as per specified and directed.

M&L for Main Boosting TR rewinding (Copper winding heavy duty) Suitable for 3 Phase Voltage Stabilizer 50 to 150 KVA,415 V,50 Hz, including dismantling old winding complete all as per specified and directed.

M&L for Main Boosting TR rewinding (Copper winding heavy duty) Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA, 415 V, 50 Hz, including dismantling old winding complete all as per specified and directed.

M&L for Dimmer (variac) rewinding with Copper winding Suitable for 3 Phase Voltage Stabilizer ,50 to 150 KVA, 415 V, 50 Hz, including dismantling old winding complete all as per specified and directed.

M&L for Dimmer (variac) rewinding with Copper winding Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA, 415 V, 50 Hz, including dismantling old winding complete all as per specified and directed.

S&F in repalcement Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 200 Amps, 36 KA,415 volts AC complete all as per specified and directed.

S&F in repalcement Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 250 Amps, 36 KA,415 volts AC complete all as per specified and directed.

S&F in repalcement Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 350 Amps, 36 KA,415 volts AC complete all as per specified and directed.

S&F in repalcement Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 400 Amps, 36 KA rating,Ics=75% Icu ,415 volts AC complete all as per specified and directed.

M/s ASPIRE ENGINEERING ENTERPRISES (BID ID -3325290)

Goodluck Enterprises (BID ID -3317004)

star electricals (BID ID -3324730)

Mahaveer Traders (BID ID -3324581)