SHORT PRESS NIT NO. 01(2022-23)WW-I

Supply of 3 phase, 415 volts, 50 Hz 30 Hp sludge submersible Pump sets at along with accessories as under: Total Head ( Mtr.) 20.00 Discharge In M3/Hr 200.00 Suitable for Specific Gravity 1.05-1.2 Motor Rated HP 30 Class Of Insulation " F " Class Type Of Duty / Protection S1/IP68 Starter Panel Star-Delta Cable Length (Mtr.) 15 INBUILT PROTECTION SYSTEM Winding Temp. Detector Primary Seal Leakage Detector (Moisture Sensor) Pump Casing C.I.FG : 260 or equivalent Spiral Plate (Suction Bell ) C.I.FG : 260or equivalent Impeller SS -316or equivalent Pump / Motor Shaft STAINLESS STEEL SS-410 [AISI-410]or equivalent Auto Coupling with Integreted Duckfoot Bend C.I. FG : 260or equivalent Lifting Chain(10 meter) M.S.Galavanised or equivalent Guide Pipe(10 meter) M.S.Galavanised or equivalent Make: MODY/KSB/all DJB approved makes

Providing mild steel specials fabricated /manufactured out of MS plate of steel grade Fe410 as per IS 3589:2001 or out of HR coils of same/equivalent grade; coated internally with food grade with epoxy and externally/outside with epoxy coating, complete in all respect as per relevant IS code with upto date amendments and as directed by Engineer-in-charge. 200 mm nominal dia (clear internal dia specials of 6 mm thickness min, pipe 60 Mtr).

Providing mild steel specials fabricated /manufactured out of MS plate of steel grade Fe410 as per IS 3589:2001 or out of HR coils of same/equivalent grade; coated internally with food grade with epoxy and externally/outside with epoxy coating, complete in all respect as per relevant IS code with upto date amendments and as directed by Engineer-in-charge. 300 mm nominal dia (clear internal dia specials of 8 mm thickness min, pipe 3 Mtr).

Providing mild steel specials fabricated /manufactured out of MS plate of steel grade Fe410 as per IS 3589:2001 or out of HR coils of same/equivalent grade; coated internally with food grade with epoxy and externally/outside with epoxy coating, complete in all respect as per relevant IS code with upto date amendments and as directed by Engineer-in-charge. 400 mm nominal dia (clear internal dia specials of 8 mm thickness min, pipe length 6 Mtr).

Supply and fixing of 200 mm dia C.I. double flanged non rising spindle sluice valve P.N 1.0 IS:14 sub, CI body / wedge / bronze ring / S.S 410 shaft construction & S.S. IS : 6603 Gr. 12 CR 12 CISI marked manual operation. Make All DJB Approved

Supply and fixing of 200 mm dia NRV. CI double flanged swing type non return valve as per IS:5312 PN 1.0 CI body door / bronge to rubber ring / SS 410 twin pin. Make All DJB Approved

P/F of MS Tapper/reducer 150mm x 200mm.

P/F of MS Bend 200mm x 200 mm with 6mm thickness.

P/F of Dead Flange 300 mm dia, 10 mm thick.

P/F of Dead Flange 400 mm dia, 10 mm thick.

P/F M.S. flange made out of 12mm thick MS plate duly machined and drilling holes to match as per existing flange of 150 mm dia holes to match as per existing flange of 150 mm dia

P/F M.S. flange made out of 12mm thick MS plate duly machined and drilling holes to match as per existing flange of 200 mm dia

P/Fixing of Rubber Sheet, M.S Nut Bolt With Washer etc as per site requirement.

Hire charge of Crane 20 T capacity

Dewatering of waste water with the help of suitable size of sludge submersible pump, delivery pipe & other consumables at suitable place.

Safety arrangement like Air Face Mask, Helmet, Gum Boots, Hand Gloves, Safety Belts, Portable Ladder, First Aid Box, Litmus Paper etc. arranged by the firm for safe working of men and machinery at site. All precautions are to be taken to save men and material.

Supply of 120 sq mm x 3.5 core, Aluminum conductor, XLPE insulated and PVC sheathed armored cable (Heavy Duty) confirming to IS : 7098(part 1) 1988with latest amendments, if any. Make Grandlay/gloster/Universal/CCI/ICC/DJB Approved

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Size 120 sq. mm x 3.5 core).

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.(Size 120 sq. mm x 3.5 core) (clamped with 40x3mm MS flat clamp)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. 3½ X 120 sq. mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. DSR civil 15.7.4 In cement mortar(300x0.3x0.15 = 13.5 cum)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing services of 4 nos underwater divers diving team with one supervisor for managing oxygen cylinder, safety of the divers etc and other under water equipment required at site work includes cleaning the surface of blend grooves of both the end where sluice gates is to be rest under deep water which includes Fixing of new 200 mm dia delivery lines for Pump set in scour chamber of waste water channel with the help of fitter, welder, cutter, helper, beldar, chowkidar, supervisor, and electrician, cutter set, oxygen cylinder, LPG cylinder, welding rod and other T & P required at site of work. This also includes arrangement of all the safe enclosed equipped with necessary equipment for making the divers body temperature normal as per surrounding atmospheric condition

Testing and commissioning of rising main on full pressure and as per satisfaction of Engineer In-charge

M/S MOHIT KUMAR CONTRACTORS