Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical HIMACHAL PRADESH HP | Accepted-Technical Responsive |
| 2 | Accepted-Technical GOVT CONTRACTOR VILLAGE DUMMI P O PAABOO TEHSIL DISTT SHIMLA | Accepted-Technical Resonsive |
| 3 | Rejected-Technical VPO TIKKA NAGROTA TEHSIL NURPUR DISTT KANGRA HIMACHAL PRADESH | KANGRA | HIMACHAL PRADESH | 175013 | Rejected-Technical Non Responsive |
Tender Value
₹83,106
EMD Value
₹1,700
Closing Date
15 Jun 2026, 5:00 pmClosed
Executive Engineer
HPPWD Division nurpur
Painting and Distemering of boundary wall and sanitary fitting etc
2026_PWD_136113_4
1863-64 dated 05.06.2026
Open Tender
Civil Works
Percentage
Nurpur
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
Yes
₹1,700
Yes
4 Jul 2026
8 Jun 2026
16 Jun 2026
8 Jun 2026
15 Jun 2026
8 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair of plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under inculding cutting the patch the proper shape ,raking out joints and preparing and plastering the surface of the walls completed ,inculding diposal of rubbish to the dumping ground,all with cement mortar 1:4(one cement four coarse sand )including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 30 | Per sqaure Meter | 226.44 | ₹6,793.2 |
| 2 | Distermpering with Ist quality acrylic distember (Ready mix)having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade old work (one or more coats)including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 562.8 | Per sqaure Meter | 46.13 | ₹25,961.96 |
| 3 | Painting wood work with Deluxe Multi Surface paint of requried shade.Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brnad and manufacture including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 45.24 | Per sqaure Meter | 73.72 | ₹3,335.09 |
| 4 | Providing and fixing 4mm thick glass panes with putty and glazing clips in steel doors windows,clerestory windows,all complete with including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 5 | Per sqaure Meter | 694.99 | ₹3,474.95 |
| 5 | Providing and fixing white vitreous china pedestal type water closet (European type)No 20087 (S - 10 ) Size 57cmx35cmx39cm (Fifty seven centimeter into thirty five centimeter into thirty nine centimeter) nominal size with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar / kerovite of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings and C.I. brackets, 40 mm (Forty millimetre) flush bend 20mm (Twenty millimetre) over flow pipe with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per architectural drawings )including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 1 | Each | 8,987.2 | ₹8,987.2 |
| 6 | Providing and fixing wash basin White Vitreous China Flat back wash basin with pedestal Delta No 10010 (HINDWARE , Kerovite) size 55cm × 40cm × 81.5 cm( fifty five centimeter into forty centi metre into eighty one point five centimeter ) (Under counter Basin ) Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details inculding painting of fitings and brackets,cutting and making good the walls wherever requried inculding necessary fitting complete )including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 2 | Each | 2,167.83 | ₹4,335.66 |
| 7 | Providing and fixing 32mm (Thirty two millimeter) nominal size diameters C.P. brass waste pipe for wash basin or sink including necessary fitting complete)including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 3 | Each | 252.5 | ₹757.5 |
| 8 | Providing and fixing flat back 600mm x450mm (Six hundred millimeter into Four hundred fifty millimeter) beveled edge mirror of Continental series of Cera / Kerovite/ Exotica of superior glass (Saint Gobain) complete with 6mm (Six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete )including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 3 | Each | 1,036.15 | ₹3,108.45 |
| 9 | Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass Long Body Bib tap of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite of approved quality (superior/ heavy duty) )15 mm nominal bore including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 2 | Each | 785.23 | ₹1,570.46 |
| 10 | Providing and fixing 100mm (One hundred millimetre) diametre C.P. iron grating of Superior quality of Continetal series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL for floor, gully or Nahni trap including necessary fitting complete )including Carriage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST. | 3 | Each | 77.33 | ₹231.99 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.16 MB
Tendernotice_2.pdf
PDF • 0.18 MB
Tendernotice_3.pdf
PDF • 4.42 MB
SBD462026.pdf
Tender Documents • 2.58 MB
BOQ_201508.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .