Thadhesha Dhinagosham- 2026 Pandhal, Stage and other Relative Works in Anthoor Muncipality (Police Ground, Muncipal Ground and Engineering College Ground)

Main Venue

OD453399/2025-2026:Providing German hanger with side coverings using modular structure featuring a pillar-less interior supported by a high-grade, hard-pressed extruded 6061-T6 or 6082-T6 aluminum alloy frame, typically utilizing a 300mm x 120mm x 5mm main profile. The structure should be engineered with an eave height of 5m to 6m and a ridge with appropriate slope, expandable in 5m modular bays to any required length. It is covered with 850 GSM double PVC-coated polyester fabric (such as SRF or Sioen) that is 100% waterproof, UV resistant, and flame retardant. For stability, the frame is connected with hot-dip galvanized steel components and secured to the ground via GI base plates, providing a wind load resistance of 80 km/h to 102 km/h. including all material, labour and hire charges etc. complete and removing the same after use as per the direction of dept. officers

OD453377/2025-2026:Providing hire charges for laying Floor Carpet in the pandhal floor including all cost and conveyance labour charges complete and removing the after use

OD453391/2025-2026:Providing and fixing the raised platform with 12mm marine plywood on horizontal support with 60 mm GI pipe supports used for leveling floor including all labour charges etc complete as per the direction of dept officers and removing after use

OD453393/2025-2026:Providing a temporary stage platform with black Cloth Masking on stage background, constructed using modular decking units, usually measuring 1.2m x 1.2m or 1.2m x 2.4m, featuring a high-strength galvanized steel frame. The surface is generally made of 18mm to 24mm thick weather-resistant plywood, often finished with a non-slip "hexagrip" or "tuffdeck" phenolic coating to ensure performer safety under stage lighting or in outdoor conditions. These platforms are supported by telescopic or interchangeable legs, allowing for adjustable heights ranging from 200mm to 1500mm, and are engineered to support a static load capacity of at least 500kg/m² to 750kg/m². For stability, the system should incorporates integrated locking clamps (deck-to-deck and leg-to-leg) to prevent shifting or gaps, and includes safety accessories such as detachable guardrails, kick plates, and flame-retardant stage skirting to conceal the understructure while meeting local fire safety codes.

OD453392/2025-2026:Supply and installation of an Octanorm- modular exhibition system, utilizing an 8-way aluminum extrusion frame. Infill panels shall be 4mm thick white finished boards, 1000mm in width (or standard modular equivalent). (Measurement and payment shall be based on the total square meter area of the vertical panels installed.)

OD453381/2025-2026:supply and installation of durable, weather-resistant temporary GI corrugated roofed tent. The framework shall be constructed from a GI superstructure, with the size and spacing shall be as per instruction of Engineer-in-Charge to ensure stability and safety. The structure shall be covered with corrugated Galvanized Iron (GI) sheets for roofing / siding as per the requirement, securely fixed using weather-sealed fasteners or J-bolts. The assembly must be engineered to withstand wind loads and provide a completely watertight environment. The scope of work include the entire assembly, including necessary bracing, flashings,. payment calculated based on the total area of corrugated sheet in roofing / siding covered (excluding overlap)

OD453382/2025-2026:Providing Arabian Pagoda 6m x 6m for one installation (high-peak marquee), premium event structure characterized by its iconic high-pointed roof and square footprint, designed to blend Middle Eastern architectural elegance with modern portability.The frame should be constructed from high-grade extruded aluminum alloy, ensuring a rust-proof, lightweight, but exceptionally sturdy skeleton capable of withstanding wind speeds up to 80 km/h. The canopy is crafted from heavy-duty PVC-coated polyester textile, which is UV-resistant, waterproof, and flame retardant (standardized to DIN 4102 B1/M2).

OD453384/2025-2026:Hire charges for ceiling the pndal with white cloth for decoration including all cost and conveyance of material and labour charges etc complete and removing after use

OD453388/2025-2026:Providing PVC armless chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453397/2025-2026:Providing PVC VIP armed & Cushioned chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453385/2025-2026:Supplying PVC Chair seat cover with a standard fabric or cloth chair cover manufactured from a durable polyester or polyester-spandex blend, engineered to withstand the rigors of high-traffic event environments Measurement- Per Each/day

OD453375/2025-2026:Providing VVIP armed & Cushioned chair premium - wooden type having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with stage . The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade chairs are engineered to support a weight capacity of at least 150 kg to 180 kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors.

OD453379/2025-2026:Supplying Premium 2 Seater Sofa With proper cushioning - rate per unit per day

OD453378/2025-2026:Supplying Premium Single Seater Sofa With proper cushioning - rate per unit per day

OD453389/2025-2026:Supplying long steel dining table with Frilled cloth cover , typically engineered for heavy-duty institutional service, featuring a 16-gauge to 18-gauge stainless steel or powder-coated carbon steel tabletop with standard rectangular format with lengths of 1800mm to 2400mm and a width of 450mm, providing a communal dining surface that stands at a standard height of 750mm, supported by 38mm to 50mm diameter tubular steel legs Measurement- Per each/day

OD453387/2025-2026:Supplying Round dining table with Frilled cloth cover , featuring a 1200mm to 1800mm diameter top to accommodate between 6 and 10 diners comfortably. The tables are to be engineered for stability with a standard height of 750mm. Measurement- Per Each/day

OD453386/2025-2026:supply and place premium-grade teapoys featuring a high-quality finish and design. The units shall be constructed with a robust frame either of solid hardwood or Metal supporting a top made of toughened (tempered) safety glass or solid hardwood as per the Engineer-in-Charge . Payment shall be made on a per-unit/per Day basis

OD453374/2025-2026:Providing front-row stage border flower decoration with a base of high-density floral foam secured within plastic trays and the arrangement measures approximately 200mm to 300mm in height and is composed of a dense mix of primary focal flowers (such as roses or carnations), secondary filler blooms, and trailing greenery (like Ivy or Eucalyptus) to soften the edges

OD453380/2025-2026:supply and installation heavy-duty, interlocking crowd control barriers constructed from galvanized steel tubing . Each unit must feature an integrated hook-and-eye interlocking system to ensure structural continuity and prevent unauthorized removal. The barriers shall stand approximately 1.1m or nearest size in height with vertical infill pickets spaced to prevent climbing or passage. To ensure public safety, all units must be equipped with low-profile flat feet to minimize trip hazards and must be completely free of sharp edges or burrs. The scope includes mobilization, precise positioning according to the site plan, and subsequent removal, with measurement and payment calculated per linear meter (LM) of the total barrier run.

OD453395/2025-2026:Supplying portable PVC Portable Bio-toilet with storage tank of 5000 liter per unit, including waste storage tank, plumbing works, raised platform, black cloth masking and light Measurement- Per Each/day

OD453394/2025-2026:Supplying portable type Bio-Toilet for the VVIP Room with Raised platform, Piping, waste storage tank, water storage tank (5000ltr), cleaning person and proper plumbing works with daily 5000ltr water and proper waste clearance Measurement- Per Each/day

OD453400/2025-2026:Providing multi-station portable handwash unit for event dining, rotationally molded polyethylene or reinforced PVC chassis with four independent faucets, often spaced at least 400mm apart to allow four users to maintain personal space while washing including a freshwater reservoir of 150 to 200 liters and a matching or slightly larger gray-water tank to ensure a full day of operation without constant refilling. For a professional dining environment, the unit includes integrated accessories such as four liquid soap dispensers, and a sealed drainage system to prevent leaks on the auditorium or event floor. Measurement- 4tap unit/day

OD453398/2025-2026:Supplying and Fixing water storage tank with stand, plumbing works for single installation per litre storage capacity Measurement- Tank Storage Capacity

OD453396/2025-2026:Providing decorative flag and pole set for events or exhibitions with a high-tenacity polyester or satin fabric flag, weighing between 110 GSM and 130 GSM . The flag standard dimensions with 60cm x 90cm (2' x 3'), featuring high-definition digital sublimation printing for vibrant, bleed-through colors that are UV-resistant. The accompanying pole is sectional mast constructed from anodized aluminum reaching heights of 2 meters to 3 meters, with a diameter of approximately 25mm to 32mm.

OD453376/2025-2026:Supplying and fixing HDPE Shade net - Green in colour green shade netting at the specified elevations as directed by the Engineer-in-Charge including cost of nylon rope, pole etc required for installation

OD453390/2025-2026:design, supply, and installation a temporary box-frame arch at entrance . The internal framework shall be fabricated from GI tubular sections of adequate gauge, with the size and spacing of all structural members to ensure the absolute structural safety and stability of the arch under all load conditions. The structure shall be covered and finished using a combination of high-quality fabric/cloth, foam sheeting, and other decorative elements to achieve a premium, custom-designed aesthetic as per the approved layout. The scope includes all necessary structural bracing, anchoring, and decorative detailing required for a stable and polished finish. Measurement and payment shall be based on the total exposed surface area of the arch as viewed in the front elevation.

OD453383/2025-2026:Directional standees retractable type , designed for quick navigation and visibility, featuring bold arrows, logos, minimal text, and high-contrast colors . The size for these displays shall be 3 feet wide by 6 feet high or nearest size . cost shall include design, printing, and placing of Directional standees as per the direction of engineer in charge

Exhibition Area

OD453363/2025-2026:Providing German hanger with side coverings using modular structure featuring a pillar-less interior supported by a high-grade, hard-pressed extruded 6061-T6 or 6082-T6 aluminum alloy frame, typically utilizing a 300mm x 120mm x 5mm main profile. The structure should be engineered with an eave height of 5m to 6m and a ridge with appropriate slope, expandable in 5m modular bays to any required length. It is covered with 850 GSM double PVC-coated polyester fabric (such as SRF or Sioen) that is 100% waterproof, UV resistant, and flame retardant. For stability, the frame is connected with hot-dip galvanized steel components and secured to the ground via GI base plates, providing a wind load resistance of 80 km/h to 102 km/h. including all material, labour and hire charges etc. complete and removing the same after use as per the direction of dept. officers

OD453351/2025-2026:Providing hire charges for laying Floor Carpet in the pandhal floor including all cost and conveyance labour charges complete and removing the after use

OD453350/2025-2026:Providing and fixing the raised platform with 12mm marine plywood on horizontal support with 60 mm GI pipe supports used for leveling floor including all labour charges etc complete as per the direction of dept officers and removing after use

OD453371/2025-2026:Providing Arabian Pagoda 6m x 6m for one installation (high-peak marquee), premium event structure characterized by its iconic high-pointed roof and square footprint, designed to blend Middle Eastern architectural elegance with modern portability.The frame should be constructed from high-grade extruded aluminum alloy, ensuring a rust-proof, lightweight, but exceptionally sturdy skeleton capable of withstanding wind speeds up to 80 km/h. The canopy is crafted from heavy-duty PVC-coated polyester textile, which is UV-resistant, waterproof, and flame retardant (standardized to DIN 4102 B1/M2).

OD453345/2025-2026:supply and installation of durable, weather-resistant temporary GI corrugated roofed tent. The framework shall be constructed from a GI superstructure, with the size and spacing shall be as per instruction of Engineer-in-Charge to ensure stability and safety. The structure shall be covered with corrugated Galvanized Iron (GI) sheets for roofing / siding as per the requirement, securely fixed using weather-sealed fasteners or J-bolts. The assembly must be engineered to withstand wind loads and provide a completely watertight environment. The scope of work include the entire assembly, including necessary bracing, flashings,. payment calculated based on the total area of corrugated sheet in roofing / siding covered (excluding overlap)

OD453365/2025-2026:Hire charges for ceiling the pndal with white cloth for decoration including all cost and conveyance of material and labour charges etc complete and removing after use

OD453355/2025-2026:Supply and installation of an Octanorm- modular exhibition system, utilizing an 8-way aluminum extrusion frame. Infill panels shall be 4mm thick white finished boards, 1000mm in width (or standard modular equivalent). (Measurement and payment shall be based on the total square meter area of the vertical panels installed.)

OD453354/2025-2026:Supplying portable type Bio-Toilet for the VVIP Room with Raised platform, Piping, waste storage tank, water storage tank (5000ltr), cleaning person and proper plumbing works with daily 5000ltr water and proper waste clearance

OD453360/2025-2026:Supplying portable PVC Portable Bio-toilet with storage tank of 5000 liter per unit, including waste storage tank, plumbing works, raised platform, black cloth masking and light

OD453364/2025-2026:Supplying Premium 2 Seater Sofa With proper cushioning - rate per unit per day

OD453353/2025-2026:Supplying Premium Single Seater Sofa With proper cushioning - rate per unit per day

OD453362/2025-2026:Providing VVIP armed & Cushioned chair premium - wooden type having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with stage . The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade chairs are engineered to support a weight capacity of at least 150 kg to 180 kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- per Each/Day

OD453349/2025-2026:Providing PVC VIP armed & Cushioned chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453367/2025-2026:Supplying long steel dining table with Frilled cloth cover , typically engineered for heavy-duty institutional service, featuring a 16-gauge to 18-gauge stainless steel or powder-coated carbon steel tabletop with standard rectangular format with lengths of 1800mm to 2400mm and a width of 450mm, providing a communal dining surface that stands at a standard height of 750mm, supported by 38mm to 50mm diameter tubular steel legs Measurement- Per each/day

OD453357/2025-2026:supply and place premium-grade teapoys featuring a high-quality finish and design. The units shall be constructed with a robust frame either of solid hardwood or Metal supporting a top made of toughened (tempered) safety glass or solid hardwood as per the Engineer-in-Charge . Payment shall be made on a per-unit/per Day basis

OD453370/2025-2026:Providing PVC armless chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453358/2025-2026:Supplying PVC Chair seat cover with a standard fabric or cloth chair cover manufactured from a durable polyester or polyester-spandex blend, engineered to withstand the rigors of high-traffic event environments Measurement- Per Each/day

OD453352/2025-2026:Supplying Round dining table with Frilled cloth cover , featuring a 1200mm to 1800mm diameter top to accommodate between 6 and 10 diners comfortably. The tables are to be engineered for stability with a standard height of 750mm. Measurement- Per Each/day

OD453368/2025-2026:Providing a professional auditorium podium typically designed as an ergonomic speaking platform with a standard height of 1100mm to 1200mm at the front, featuring a slanted reading surface to hold notes or a laptop. The construction generally utilizes high-density wood veneer, melamine-faced MDF, or acrylic, reinforced with an internal steel or aluminum frame for structural rigidity. The reading shelf, usually measuring approximately 600mm wide by 450mm deep, includes a raised document stopper to prevent papers from sliding off and a built-in cable management port (grommet) for microphone and laptop wires Measurement- Per unit/day

OD453359/2025-2026:Providing multi-station portable handwash unit for event dining, rotationally molded polyethylene or reinforced PVC chassis with four independent faucets, often spaced at least 400mm apart to allow four users to maintain personal space while washing including a freshwater reservoir of 150 to 200 liters and a matching or slightly larger gray-water tank to ensure a full day of operation without constant refilling. For a professional dining environment, the unit includes integrated accessories such as four liquid soap dispensers, and a sealed drainage system to prevent leaks on the auditorium or event floor. Measurement- 4tap unit/day

OD453369/2025-2026:Supplying and Fixing water storage tank with stand, plumbing works for single installation per litre storage capacity Measurement- Tank Storage Capacity

OD453347/2025-2026:supply and installation heavy-duty, interlocking crowd control barriers constructed from galvanized steel tubing . Each unit must feature an integrated hook-and-eye interlocking system to ensure structural continuity and prevent unauthorized removal. The barriers shall stand approximately 1.1m or nearest size in height with vertical infill pickets spaced to prevent climbing or passage. To ensure public safety, all units must be equipped with low-profile flat feet to minimize trip hazards and must be completely free of sharp edges or burrs. The scope includes mobilization, precise positioning according to the site plan, and subsequent removal, with measurement and payment calculated per linear meter (LM) of the total barrier run.

OD453356/2025-2026:Supplying and fixing HDPE Shade net - Green in colour green shade netting at the specified elevations as directed by the Engineer-in-Charge including cost of nylon rope, pole etc required for installation

OD453366/2025-2026:Providing front-row stage border flower decoration with a base of high-density floral foam secured within plastic trays and the arrangement measures approximately 200mm to 300mm in height and is composed of a dense mix of primary focal flowers (such as roses or carnations), secondary filler blooms, and trailing greenery (like Ivy or Eucalyptus) to soften the edges

OD453346/2025-2026:design, supply, and installation a temporary box-frame arch at entrance . The internal framework shall be fabricated from GI tubular sections of adequate gauge, with the size and spacing of all structural members to ensure the absolute structural safety and stability of the arch under all load conditions. The structure shall be covered and finished using a combination of high-quality fabric/cloth, foam sheeting, and other decorative elements to achieve a premium, custom-designed aesthetic as per the approved layout. The scope includes all necessary structural bracing, anchoring, and decorative detailing required for a stable and polished finish. Measurement and payment shall be based on the total exposed surface area of the arch as viewed in the front elevation.

OD453348/2025-2026:Directional standees retractable type , designed for quick navigation and visibility, featuring bold arrows, logos, minimal text, and high-contrast colors . The size for these displays shall be 3 feet wide by 6 feet high or nearest size . cost shall include design, printing, and placing of Directional standees as per the direction of engineer in charge

OD453373/2025-2026:Providing decorative flag and pole set for events or exhibitions with a high-tenacity polyester or satin fabric flag, weighing between 110 GSM and 130 GSM . The flag standard dimensions with 60cm x 90cm (2' x 3'), featuring high-definition digital sublimation printing for vibrant, bleed-through colors that are UV-resistant. The accompanying pole is sectional mast constructed from anodized aluminum reaching heights of 2 meters to 3 meters, with a diameter of approximately 25mm to 32mm.

OD453361/2025-2026:design, supply, and installation a temporary box-frame small arch for advertisement . The internal framework shall be fabricated from GI tubular sections of adequate gauge, with the size and spacing of all structural members to ensure the absolute structural safety and stability of the arch under all load conditions. The structure shall be covered and finished using 4 side branding and 2D projections using Form sheet. The scope includes all necessary structural bracing, anchoring, and decorative detailing required for a stable and polished finish. Measurement and payment shall be based on the total exposed surface area of the arch as viewed in the front elevation.

OD453372/2025-2026:side branding for food court as per the direction of engineer in charge

Programme area

OD453339/2025-2026:Providing German hanger with side coverings using modular structure featuring a pillar-less interior supported by a high-grade, hard-pressed extruded 6061-T6 or 6082-T6 aluminum alloy frame, typically utilizing a 300mm x 120mm x 5mm main profile. The structure should be engineered with an eave height of 5m to 6m and a ridge with appropriate slope, expandable in 5m modular bays to any required length. It is covered with 850 GSM double PVC-coated polyester fabric (such as SRF or Sioen) that is 100% waterproof, UV resistant, and flame retardant. For stability, the frame is connected with hot-dip galvanized steel components and secured to the ground via GI base plates, providing a wind load resistance of 80 km/h to 102 km/h. including all material, labour and hire charges etc. complete and removing the same after use as per the direction of dept. officers

OD453338/2025-2026:Supply and installation of an Octanorm- modular exhibition system, utilizing an 8-way aluminum extrusion frame. Infill panels shall be 4mm thick white finished boards, 1000mm in width (or standard modular equivalent). (Measurement and payment shall be based on the total square meter area of the vertical panels installed.)

OD453341/2025-2026:Providing hire charges for laying Floor Carpet in the pandhal floor including all cost and conveyance labour charges complete and removing the after use

OD453336/2025-2026:Providing and fixing the raised platform with 12mm marine plywood on horizontal support with 60 mm GI pipe supports used for leveling floor including all labour charges etc complete as per the direction of dept officers and removing after use

OD453337/2025-2026:Providing PVC armless chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453344/2025-2026:Providing PVC VIP armed & Cushioned chair - monoblock construction molded from high-quality, UV-stabilized unplasticized polyvinyl chloride having an overall height ranging from 750mm to 850mm, with a seat height of approximately 450mm to ensure ergonomic compatibility with standard dining or work tables. The seat width and depth usually measure between 400mm and 500mm, providing a compact footprint ideal for high-density seating. To ensure safety and longevity, most professional-grade PVC chairs are engineered to support a weight capacity of at least 100kg to 125kg and include features like perforated backrests for ventilation and tapered legs with non-slip floor protectors. Measurement- Per Each/day

OD453342/2025-2026:Supplying Premium 2 Seater Sofa With proper cushioning - rate per unit per day

OD453340/2025-2026:supply and installation heavy-duty, interlocking crowd control barriers constructed from galvanized steel tubing . Each unit must feature an integrated hook-and-eye interlocking system to ensure structural continuity and prevent unauthorized removal. The barriers shall stand approximately 1.1m or nearest size in height with vertical infill pickets spaced to prevent climbing or passage. To ensure public safety, all units must be equipped with low-profile flat feet to minimize trip hazards and must be completely free of sharp edges or burrs. The scope includes mobilization, precise positioning according to the site plan, and subsequent removal, with measurement and payment calculated per linear meter (LM) of the total barrier run.

OD453343/2025-2026:Supplying portable type Bio-Toilet for the VVIP Room with Raised platform, Piping, waste storage tank, water storage tank (5000ltr), cleaning person and proper plumbing works with daily 5000ltr water and proper waste clearance Measurement- Per Each/day

Temporary electrification work

OD452574/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (2 x 2.5 sq. mm+1x12SWG GI) and giving connection for first day

OD452518/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (2 x 2.5 sq. mm+1x12SWG GI) and giving connection for additional days

OD452520/2025-2026:Hire and labour charges for drawing 4x2.5 sq mm FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire and giving connection for first day

OD452569/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (4 x 2.5 sq. mm+1x12SWG GI) and giving connection for additional days

OD452512/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (2 x 4 sq. mm+1x12SWG GI) and giving connection for first day

OD452550/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (2 x 4 sq. mm+1x12SWG GI) and giving connection for additional days

OD452570/2025-2026:Hire and labour charges for drawing 4x4 sq mm FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire and giving connection for first day

OD452564/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (4 x 4 sq. mm+1x12SWG GI) and giving connection for additional days

OD452532/2025-2026:Hire and labour charges for drawing 4x6 sq mm FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire and giving connection for first day

OD452555/2025-2026:Hire and labour charges for drawing following sizes of FRLS PVC insulated copper conductor, single core cable clipped with No12 SWG GI wire (4 x 6 sq. mm+1x12SWG GI) and giving connection for additional days

OD452501/2025-2026:Hire and labour charges for providing 25 mm PVC conduit with accessories for first day

OD452502/2025-2026:Hire and labour charges for providing 25 mm PVC conduit with accessories for additional day

OD452529/2025-2026:Hire and labour charges for providing 20 mm PVC conduit with accessories for first day

OD452522/2025-2026:Hire and labour charges for providing 20 mm PVC conduit with accessories for additional days

OD452523/2025-2026:Hire and labour charges for providing Fire extinguisher Co2 -2 kg hokked on the wall etc as required for additional day

OD452562/2025-2026:Hire and labour charges for providing Fire extinguisher Co2 -2 kg hokked on the wall etc as required for first day

OD452510/2025-2026:Hire and labour charges for providing 3 phase 4W TPN VDB with 4P MCB/Isolator, 4P RCCB and SP/TPMCBs and giving connection for first day

OD452527/2025-2026:Hire and labour charges for providing 3 phae 4 way TPN VDB with isolater.RCCB,MCB d giving connection etc as required for additional day

OD452503/2025-2026:Hire and labour charges for providing 3 phase 6W TPN VDB with 4P MCB/Isolator, 4P RCCB and SP/TPMCBs and giving connection for first day

OD452530/2025-2026:Hire and labour charges for providing 3 phase 6W TPN VDB with 4P MCB/Isolator, 4P RCCB and SP/TPMCBs and for additional one day

OD452521/2025-2026:Hire and labour charges for drawing 3.5x25sq mm UG alu cable and giving connection for first day

OD452548/2025-2026:Hire and labour charges for drawing 3.5x25sq mm UG alu cable and giving connection for additional day

OD452499/2025-2026:Hire and labour charges for drawing 4x16sq mm UG alu cable and giving connection for first day

OD452531/2025-2026:Hire and labour charges for drawing 4x16sq mm UG alu cable and giving connection for first day

OD452553/2025-2026:Hire and labour charges for drawing 4x10sq mm UG alu cable and giving connection for first day

OD452511/2025-2026:Hire and labour charges for drawing 4x10sq mm UG alu cable and giving connection for additional day

OD452506/2025-2026:Hire and labour charges for providing light duty pedestal fan and giving connection for first day

OD452507/2025-2026:Hire charges for providing light duty pedestal fan for additional one day

OD452516/2025-2026:Hire and labour charges for providing 6A 1 way switch &6A modular socket in suitable box and wiring using 1.5 sqmm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for first day

OD452505/2025-2026:Hire and labour charges for providing 6A 1 way switch &6A modular socket in suitable box and wiring using 1.5 sqmm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for additional one day

OD452559/2025-2026:Hire and labour charges for providing 16A 1 way switch & 16A modular socket in suitable box and giving connection using 2.5 sqmm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for first day

OD452535/2025-2026:Hire and labour charges for providing 16A 1 way switch & 16A modular socket in suitable box and giving connection using 2.5 sqmm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for additional one day

OD452567/2025-2026:Hire & labour charges for wiring light point /fanpoint using1.5 sqmm FRLS PVC insulated copper conductor single core cable through rigid PVC conduit of minimum size 20mm with modular type switch with front cover & base on suitable size box and earthing the point with 2.5 sqmm FRLS PVC insulated copper conductor single core cable for first day

OD452551/2025-2026:Hire & labour charges for wiring light point /fanpoint using1.5 sqmm FRLS PVC insulated copper conductor single core cable through rigid PVC conduit of minimum size 20mm with modular type switch with front cover & base on suitable size box and earthing the point with 2.5 sqmm FRLS PVC insulated copper conductor single core cable foradditional one day

OD452695/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For first day

OD452714/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For additional days

OD452534/2025-2026:Hire & labour charges for providing 65W LED lamp with holder and wiring using 2.5 sqmm FRLS PVC insulated copper wire clipped in No12 GI wire for first day

OD452542/2025-2026:Hire & labour charges for providing 65W LED lamp with holder for additional one day

OD452554/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for first day

OD452536/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for additional one day

OD452525/2025-2026:Hire and labour charges for providing 450mm heavy duty pedestal fan completee with accessaries and giving connection etc as required for first day

OD452571/2025-2026:Hire and labour charges for providing 450mm heavy duty pedestal fan completee with accessaries and giving connection etc as required for additional day

OD452784/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for first day.

OD452788/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for additional days

OD452734/2025-2026:Hire and labour charges for providing 82.5 KVA DG set complete with standard accessories including operator etc.as required for additional days

OD452735/2025-2026:Hire and labour charges for providing 82.5 KVA DG set complete with standard accessories including operator etc.as required for first day

OD452762/2025-2026:Running charges for providing 82.5 KVA Generator set including supply of fuel

OD452585/2025-2026:Hire and labour charges for providing 250KVA DG set complete with standard accessaries including operator etc etc as required for first day

OD452581/2025-2026:Hire and labour charges for providing 250KVA DG set complete with standard accessaries including operator etc etc as required for additional day

OD452586/2025-2026:Hire and labour charges for drawing 3.5x150 sq mm UG alu cable and giving connection for first day

OD452580/2025-2026:Hire and labour charges for drawing 3.5x150 sq mm UG alu cable and giving connection for additional day

OD452576/2025-2026:H&L charges for drawing 3.5x185 sq mm UG alu cable and giving connection for first day

OD452577/2025-2026:Hire and labour charges for drawing 3.5x185 sq mm UG alu cable and giving connection for additional day

OD452515/2025-2026:Hire and labour charges for providing 100A 4 pole on load COS in stainless steel enclosure and giving connection etc as required for first day

OD452566/2025-2026:Hire and labour charges for providing 100A 4 pole on load COS in stainless steel enclosure and giving connection etc as required for additional day

OD452578/2025-2026:Hire and labour charges for providing 400A 4 pole on load COS in stainless steel enclosure and giving connection etc as required for first day

OD452575/2025-2026:Hire and labour charges for providing 400A 4 pole on load COS in stainless steel enclosure and giving connection etc as required for additional day

OD452547/2025-2026:Hire and labour charges for drawing 3.5x50sq mm UG alu cable and giving connection for first day

OD452537/2025-2026:Hire and labour charges for drawing 3.5x50 sq mm UG alu cable and giving connection for additional day

OD452579/2025-2026:Hire and labour charges for providing Main board comprissing 125A pole MCCB with ELR as incoming and,2Nos 63 A TPN SDF and 3 No s 32A TPN SDF as out goings and giving connection etc as required for first day

OD452584/2025-2026:Hire and labour charges for providing Main board comprissing 400 A pole MCCB with ELR as incoming and 2 nos 125A TPNSDF,2Nos 100A TPN SDF and 3 No s63A TPN SDF as out goings and giving connection etc as required for additional day

OD452582/2025-2026:Hire and labour charges for providing Main board comprissing 4004 pole MCCB with ELR as incoming and 2 nos 125A TPNSDF,2Nos 100A TPN SDF and 3 No s63A TPN SDF as out goings and giving connection etc as required for first day

OD452508/2025-2026:Hire and labour charges for providing Main board comprissing 125A pole MCCB with ELR as incoming and,2Nos 63 A TPN SDF and 3 No s 32A TPN SDF as out goings and giving connection etc as required for additional day

OD452572/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc as required for first day

OD452557/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc for additional one day

OD452528/2025-2026:Hire and labour charges for drawing No 12 SWG copper as earth lead and giving connection for first day

OD452549/2025-2026:Hire and labour charges for drawing No 10 SWG copper as earth lead and giving connection for first day

OD452544/2025-2026:Hire and labour charges for drawing No 10 SWG copper as earth lead and giving connection for additional day

OD452539/2025-2026:Hire and labour charges for drawing No 12 SWG copper as earth lead and giving connection for additional day

OD452517/2025-2026:Hire and labour charges for drawing No 8 SWG copper as earth lead and giving connection for first day

OD452514/2025-2026:Hire and labour charges for drawing No 8 SWG copper as earth lead and giving connection for additional day

OD452565/2025-2026:Hire and labour charges for drawing No 4 SWG copper as earth lead and giving connection for first day

OD452552/2025-2026:Hire and labour charges for drawing No 4 SWG copper as earth lead and giving connection for additional day

OD452533/2025-2026:Hire and labour charges for drawing 25x3 mm GI strip as earth lead and giving connection for first day

OD452546/2025-2026:Hire and labour charges for drawing 25x3 mm GI strip as earth lead and giving connection for additional day

OD452563/2025-2026:Hire and labour charges for providing Air cutter unit complete with standard accessories and giving connection etc as required for additionaal day

OD452541/2025-2026:Hire and labour charges for providing Air cutter unit complete with standard accessories and giving connection etc as required for first day

OD452583/2025-2026:Hire and labour charges for providing 5/5.5TR ductable Air conditio unit complete with standard accessories and giving connection etc as required for first day.( Numbers of unit will be restricted based on the available space)

OD452587/2025-2026:Hire and labour charges for providing 5/5.5TR ductable Air conditio unit complete with standard accessories and giving connection etc as required for additional day

OD452519/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprising 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For first day

OD452504/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprissing 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For additional days

OD454366/2025-2026:Running charges for providing Generator set including supply of fuel

OD454407/2025-2026:Statutory Fee and other deposit amount to KSELB & KSEB for approval from the concerned department for generator installation. (LS provision as per the receipt)

OD452828/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For first day

OD452827/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For additional days

OD454313/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for first day

OD454312/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for additional days

OD454314/2025-2026:Hire and labour charges for providing 5/5.5TR ductable Air conditioner unit complete with standard accessories and giving connection etc as required for additional days.

OD454315/2025-2026:Hire and labour charges for providing 5/5.5TR ductable Air conditioner unit complete with standard accessories and giving connection etc as required for first day.( Numbers of unit will be restricted based on the available space)

OD454320/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for additional days

OD454321/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for first day.

OD454322/2025-2026:Hire and labour charges for providing light duty pedestal fan and giving connection for additional day day

OD454323/2025-2026:Hire and labour charges for providing light duty pedestal fan and giving connection for first day

OD454324/2025-2026:Hire and labour charges for providing 16A 1 way switch & 16A modular socket in suitable box and giving connection using 2.5 sq mm FRLS PVC insulated single core copper cable with 2.5 sq mm FRLS wire as earth wire for additional day

OD454325/2025-2026:Hire and labour charges for providing 16A 1 way switch & 16A modular socket in suitable box and giving connection using 2.5 sqmm FRLS PVC insulated single core copper cable with 2.5 sq mm FRLS wire as earth wire for first day

OD454326/2025-2026:Hire and labour charges for providing 6A 1 way switch &6A modular socket in suitable box and wiring using 1.5 sq mm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for additional days

OD454327/2025-2026:Hire and labour charges for providing 6A 1 way switch &6A modular socket in suitable box and wiring using 1.5 sq mm FRLS PVC insulated single core copper cable with 2.5 sqmm FRLS wire as earth wire for first day

OD454328/2025-2026:Hire and labour charges for providing 1x20W LED tube fittings with tube and giving connection for additional days

OD454329/2025-2026:Hire and labour charges for providing 1x20W LED tube fittings with tube and giving connection for first day

OD454746/2025-2026:Hire and labour charges for providing 82.5 KVA DG set complete with standard accessories including operator etc.as required for first day

OD454745/2025-2026:Hire and labour charges for providing 82.5 KVA DG set complete with standard accessories including operator etc.as required for additional days

OD454738/2025-2026:Hire and labour charges for providing 250 KVA DG set complete with standard accessories including operator etc.as required for first day

OD454737/2025-2026:Hire and labour charges for providing 250 KVA DG set complete with standard accessories including operator etc.as required for additional days

OD454343/2025-2026:Hire and labour charges for providing 320 KVA DG set complete with standard accessories including operator etc.as required for additional days

OD454346/2025-2026:Hire and labour charges for providing 125 KVA DG set complete with standard accessories including operator etc.as required for first day

OD454348/2025-2026:Hire and labour charges for providing 125 KVA DG set complete with standard accessories including operator etc.as required for Additional days

OD454387/2025-2026:Supply conveyance for Running charges for providing Diesel for Generator set.

OD454379/2025-2026:Statutory Fee and other deposit amount to KSELB & KSEB for approval from the concerned department for generator installation. (LS provision as per the receipt)

OD454417/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprising 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For additional days

OD454418/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprising 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For First day

OD454428/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc as required for additional days

OD454429/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc as required for first day

OD454349/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For additional days

OD454350/2025-2026:Hire and labour charge for providing dome light fittings suitable for hanging inside the Germen hanger and wiring using 2.5 sq mm FRLS PVC insulated copper wire cliped in no.12 GI wire as required -For first day

OD454351/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for additional days

OD454352/2025-2026:Hire and labour charges for providing 1200mm ceiling fan and giving connection for first day

OD454355/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for additional days

OD454356/2025-2026:Hire and labour charges for providing Cooler fans and giving connection for first day.

OD454360/2025-2026:Hire and labour charges for providing Green coloured 200 W LED flood fittings and giving connection for first days

OD454361/2025-2026:Hire and labour charges for providing green colours 200 W LED flood fittings and giving connection for additional days

OD454362/2025-2026:Hire and labour charges for providing 200 W LED flood fittings and giving connection for first days

OD454363/2025-2026:Hire and labour charges for providing 200 W LED flood fittings and giving connection for additional days

OD454364/2025-2026:Hire and labour charges for providing 250 KVA DG set complete with standard accessories including operator etc.as required for additional days

OD454365/2025-2026:Hire and labour charges for providing 250 KVA DG set complete with standard accessories including operator etc.as required for first day

OD454404/2025-2026:Supply conveyance for Running charges for providing Diesel for Generator set.

OD454406/2025-2026:Statutory Fee and other deposit amount to KSELB & KSEB for approval from the concerned department for generator installation. (LS provision as per the receipt)

OD454420/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprising 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For First day

OD454419/2025-2026:Hire and labour charges for providing Meter board for availing KSEB connection comprising 100A TPN with RCCB,3 Nos 125A HEC fuse unit with fuse and 100 A N/L etc as required. For additional days

OD454430/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc as required for additional days

OD454431/2025-2026:Hire and labour charges for providing pipe earthing using 40mm dia GI pipe of 4.5m long including accessories etc as required for first day