Loading
Loading…
Loading…
Tender Value
₹7.4 L
EMD Value
Exempted
Closing Date
21 Oct 2026, 2:00 pm
Published by the portal on this tender, for queries and grievance redressal.
ADJUSTABLE 10.5 TO 15.75 MM
LIFTING JACK SCREW TYPE
DRILL TWIST 1.5 MM TO 15 MM
COMPRESSION GAUGE FOR DIESEL ENGINE WITH STANDARD ACCESSORIES
STARTER MOTOR CO- AXIAL TYPE
SOLID PARALLELS IN PAIRS
DIFFERENT TYPE OF PISTON MODEL
SPANNER DOUBLE ENDED RING SET OF 12 PIECES
SPANNERS DOUBLE ENDED OPEN SET OF 12
VALVE SPRING COMPRESSOR UNIVERSAL
PUNCH HOLLOW
RIVET SETS SNAP AND DOLLY COMBINED 6 MM
ENGINEERS STETHOCOPE
RIVET SETS SNAP AND DOLLY COMBINED 4 MM
GAUGE IMPERIAL SHEET
PUNCH FIGURE NUMBER 4 MM
DRILL POINT ANGLE GAUGE
STUD REMOVER WITH HANDLE
PUNCH PRICK
TRAMMEL 30 CM
SCRIBER 150 MM
PIPE WRENCH 350MM LONG
POWER TOOL FOR FASTENING
PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD
DRILLS GUAGE STRAIGHT SHANK LETTER SIZES A TO Z WITH GUAGE
DRILLS GUAGE STRAIGHT SHANK WIRE SIZE 1 TO 60 WITH GUAGE
CALIPER HERMACHRODITE SPRING 15 CM
DIVIDER SPRING
PUNCH DOT SLOT
DRILL TWIST ST. SHANK
CUTTER
PIPE WHEEL TYPE
WELDING TORCHE WITH NOZZLES
KNURLING TOOL
WELDING TORCHS TIPS ASSORTED
WASHER CLUTCH KEYS JIB COTTER AND CIRCLIP
LAPPING PLATE
GEAR - SPUR OLD DAMAGED TO FIT 50 MM SHAFT DIA
SCRAPER FLAT 12 MM X 150 MM.
SCRAPER HALF ROUND 15 CM.
GRINDING WHEEL DRESSER
DRIFT DRILL 200 MM HARDENED AND BLACK FINISH
CHISEL DIAMOND POINT 9 X 150 MM
CHISEL COLD 9 MM ROUND NOZE 100 MM
EARTH CLAMPS 600A
HAMMER CHIPPING 0.25 KG
SPARK LIGHTER
INVERTER 1 KVA
VARIABLE AUTO TRANSFORMER
LOW-PRESSURE SODIUM LAMP
RCC POLE WITH ACCESSORIES
BRAKE TEST ARRANGEMENT WITH TWO SPRING BALANCE OF 0 TO 25 KG RATING
MOTOR AC SINGLE PHASE
STEPPER MOTOR WITH DIGITAL CONTROL
THREE PHASE SMART ENERGY METER
FUNCTION GENERATOR
SHADED POLE MOTOR FRACTIONAL HP
240 V
50 HZ
STARTERS FOR 3-PHASE
D.C. STARTERS-4-POINTS FOR 2.5 KW DC MOTOR
SINGLE PHASE SMART ENERGY METER
D.C. STARTERS-3-POINT FOR 2.5 KW DC MOTOR
COIL WINDING MACHINE
WIRING BOARD ON STAND
SERIES TYPE OHM METER 0-2000 APPROXIMATE
SHUNT TYPE OHM METER 0-2000 APPROXIMATE
LABORATORY TYPE INDUCTION COIL 1000W
AMMETER M.C.0-5 D.C
SERIES TYPE WITH STARTER WITH SWITCH 1 HP
GROWLER
DRILL S.S. TWIST BLOCK
MALLET HARD WOOD 0.50 KG.
SOLDERING IRON EXCHANGABLE COPPER TIP
HAMMER EXTRACTOR TYPE
BEARING PULLER SET BENDING MACHINE CONDUIT PIPE
SUITABLE FOR 15 MM
18 MM
25 MM AND 30 MM PIPE
AUTO TRANSFORMER 15 AMPS
MALLET BARWOOD 1 KG. (75 MM X 15 MM)
SOLAR STREET LIGHT LAMP SET 12V
18/24 WATTS
RECHARGEABLE BATTERY 12V
100AH
CONDUIT PIPE CUTTING AND THREADING MACHINES ADJUSTABLE FOR 15 MM TO 30 MM
SOFT STARTER SINGLE PHASE
DMX CONTROLLER
CUT OUT RELAYS
REVERSE CURRENT RELAYS
UNDER VOLTAGE RELAYS
SOLID STATE SOLAR BASE SINGLE PHASE ENERGY METER (BIDIRECTIONAL)5-30AMOPS
240V
RAWL PUNCH HOLDER AND BITS (NO. 8
10)
INSULATOR EGG TYPE INCLUDING HARDWARE FITTING
INSULATOR SUSPENSION TYPE INCLUDING HARDWARE FITTING
TABLE FOR DEMONSTRATION 2.5 X 1.20 X 0.75 METERS
PLUMB BOB 115 GRAMS
AUTOMATIC REVERSE FORWARD STARTER
SPANNER DOUBLE ENDED 1819
2022
2123
2427
2527
9935126
GEM/2026/B/8073435
Two Packet Bid
BENDING MACHINE CONDUIT PIPE
Kheda, Gujarat
Item wise evaluation
BOQ
5 documents required · 5 mandatory
3 yrs
₹3.5 L
₹14 L
50%
PRINCIPAL CLASS 1,, INDUSTRIAL TRAINING INSTITUTE, PALANA, Det, Labour and Employment Department Gujarat, Directorate of Employment & Training,, (Shri. K.h.soni)
Exempted
Yes
30 Sept 2026
30 Sept 2026
22 Oct 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | BENDING MACHINE CONDUIT PIPE | AS PER ITEM SPECIFICATION DOCUMENT | 1 | NOS | KHEDA_CON | 15 |
| 2 | AUTO TRANSFORMER 15 AMPS | AS PER ITEM SPECIFICATION DOCUMENT | 2 | NOS | KHEDA_CON | 15 |
| 3 | MALLET BARWOOD 1 KG | AS PER ITEM SPECIFICATION DOCUMENT | 29 | NOS | KHEDA_CON | 15 |
| 4 | SOLAR STREET LIGHT LAMP SET | AS PER ITEM SPECIFICATION DOCUMENT | 4 | NOS | KHEDA_CON | 15 |
| 5 | RECHARGEABLE BATTERY | AS PER ITEM SPECIFICATION DOCUMENT | 1 | NOS | KHEDA_CON | 15 |
| 6 | CONDUIT PIPE CUTTING AND THREADING MACHINES | AS PER ITEM SPECIFICATION DOCUMENT | 1 | NOS | KHEDA_CON | 15 |
| 7 | SOFT STARTER SINGLE PHASE | AS PER ITEM SPECIFICATION DOCUMENT | 1 | NOS | KHEDA_CON | 15 |
| 8 | DMX CONTROLLER | AS PER ITEM SPECIFICATION DOCUMENT | 1 | NOS | KHEDA_CON | 15 |
| 9 | CUT OUT RELAYS | AS PER ITEM SPECIFICATION DOCUMENT | 2 | NOS | KHEDA_CON | 15 |
| 10 | REVERSE CURRENT RELAYS | AS PER ITEM SPECIFICATION DOCUMENT | 2 | NOS | KHEDA_CON | 15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9935126.pdf
GEM_BID • 1.02 MB
item_specification_2026-09-23-14-00-53_0d0e65f4685556653f6add65e36a1ae1.pdf
BOQ • 0.40 MB
141_item_2026-09-23-14-00-53_ffaf44f75f1b5e2575ff3451dc6a1e9f.csv
BOQ • 0.01 MB
atckheda_3dba7b6d-8667-4c24-aeed1790167402667_KHEDA_BUYER.pdf
GEM_OTHER • 0.53 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .