Provn of Road connecting Vayu Vihar to Kendriya Vidyalaya Akkulam at HQ SAC (U) Trivandrum

Amount

GENERAL SUMMARY (Note : Schedule 'A' Part I to VII are prepriced by MES under Ser No. 2 to 8.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)

Total of Schedule ‘A’ Part I “BUILDING/STRUCTURES (GATE)”

Total of Schedule ‘A’ Part II “SITE CLEARANCE/ EARTHWORK AND EXCAVATION ”

Total of Schedule ‘A’ Part III “ ROAD ”

Total of Schedule ‘A’ Part IV “PATH”

Total of Schedule ‘A’ Part V “ RETAINING WALL”

Total of Schedule ‘A’ Part VI “ AREA DRAINAGE”

Total of Schedule ‘A’ Part VII “EXTERNAL ELECTRIC SUPPLY”

Total of Schedule ‘A’ Part VIII “DEMOLITION”

Sch 'A' Part- IX - MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)

Forming embankments of soil including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.

Forming embankments of soil including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.,exc. 1.5 m but not exc 3 mtr high from base complete all as specified and directed. Note For item No. 11 & 12 i) Embankment shall be compacted in layers as specified with power roller. Each layer shall be tested for percentage compaction / degree of compaction t comply with Morth specification and result shall be kept on records. ii) Measurements shall be taken only after compaction. Compacted thickness will be considered for payment. iii) The quoted rate shall be inclusive of the above tests and rolling.

Supply only good quality soil from outside MD land.

M&L for two coat of exterior emulsion weather coat paint over the new plasterd wall surface including preparation of surfaces and one coat of primer complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters, etc.on roads, pavements and the like minimum 2mm thick with thermoplastic road marking paint white and including preparation of old surface to receive the painting complete all as specified and directed.

S&F Direction CAT's eyes of size 100x 90x19.80mm, two sides acrylic plastic reflector of make conforming to ASTM standards and fixed with epoxy/nail complete all as specified and directed.

Supply and installation of TRAFFIC signs made with high intensity grade tape (Avery or 3M or equivalent brand) pasted on 2mm thick aluminium sheet back frame angle of size 25x25x5mm, fixing angle of size 65x65x5mm, (2 Nos) complete including excavation for post holes, refilling with PCC 1:4:8 after fixing angles all as specified and directed by Engr-in-Charge for the following

OVER TAKING PROHIBITED (500 MM DIA CIRCLE)

HORN PROHIBITED (600MM DIA CIRCLE)

SPEED LIMIT (600 MM DIA CIRCLE)

Supply and installation of solar road stud made of poly carbonate ABS moulded body and shanks and PC top 3 Nos super bright LEDs on each side, also has dimond grade reflectors on each side for improved visibility, size of stud is 113 x 70mm with 15mm above the ground when installed. Weight = 780 +/- 20 gms, 1 No 1.2V rechargeable battery, 2.5V, 0.25-0.30W solar panel, visibility upto 600mtrs, complete all as specified and directed by Engr-in-Charge.

S&Foutdoor convex mirror of 100cm (min) dia, polycarbonate lens, Brim and back holding plates of fibre reinforced plastic including fixing at suitable height complete all as specified and directed by Engr-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

S& F energy saving luminaries 45W capacity LED type presired with IP 65 protection including provition of powder coated hollow pipe or bollard all as specified and as directed.

S&F GI pipe bracket for street light fittings mounted on LT pole upto 8m made out of 40mm dia GI pipe medium grade 1.5mtr long bend to required angle/shape with and including necessary clamps nuts & bolts & washers of suitable size all as directed by Engr-in-Charge.

S&F hot press moulded SMC junction box / terminal box of size with internal dimensions of 200 X 140 X 95mm with hinged door , made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, driling holes for cable connections, connecting incoming and or out going cables by providing suitable size of cable lugs/ glands, fixed on pole by means of clamps complete all as specified and as directed.

Dismantling and taking down existing Lt panel cubical type AC 3 phase 440 volts from old location and shifting the same to new location as directed by Engr-in-charge including foundation complete all as specified and as directed. Note : Cable and connected items will be paid seperately

Dismantling and taking down two unsv PCC pole from existing location complete all as specified and as directed.

Dismantling and taking down unsv HT cable of size 95 sqmm 3 core complete all as specified and as directed.

Dismantling and taking down unsv LT cable of size 70 sqmm 3.5 core complete all as specified and as directed.

Dismantling and taking down unsv LT cable of size 10 sqmm 2 core complete all as specified and as directed.

S&F HT cable route indicator cast iron of suitable size along HT cable in trench including planting in ground with PCC complete all as specified and as directed.

M/s Hari Construction

AKASH CONSTRUCTIONS

Powertech Engineers

M/S SABU PETER