Mana Badi Mana Bhavishyathu

VRCC M20 Nominal Mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges including over heads and contractors profit but excluding seigniorage charges for finished item of work for Base Beam.

VRCC M20 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns First Floor.

VRCC M20 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Sunshades First Floor

VRCC M20nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. verandah

VRCC M20nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.lintel

VRCC M20 nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, using a minimum quantity of 400 Kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work. [RCC SLABS 125mm thick]

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work. [Providing Impervious coat in Second Floor]

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.

20mm Thick Plain cement motor bands in cement mortar (1:5) 50mm in width including cost and conveyance of all materials and all labour charges etc., complete

Supply and fixing of ceramic steel Green Chalk Board of size 2400mmx 1200mm with vitreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with Ceramic steel engraving on surface (having vitreous enameled coating both sides), 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick MDF Board make : (Greenlam / Merino / Action Tesa) back support and backing with 0.25mm thick galvanized steel sheet make : (TATA / JSW / Sail / Vizag Steel) fixed withanodized aluminum frame 20mm wide and 1.2mm thick and board shall be given additional support at four sides bottom with Alluminium J-Clamps (8 Nos.) including cost & conveyance of all materials and all labour charges like loading, unloading, including GST and all taxes etc., as applicable from time to time and fixing of Green Board etc., complete for finished item of work. The item shall carry a Warranty period of 7 (Seven) years from the date of Supply

Ornamental Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with CM (1:5) Single Coat, 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Plastering with CM (1:5), 20mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls. First Floor

Flooring with Nano polished/ stain free soluble salt porcelain Vitrified tiles screen printed of size 600x600mm and thickness between 8-10mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work. First Floor

Providing skirting to internal walls to 15 cm height/ risers of steps with Nano polished/ stain free soluble salt porcelain Vitrified tiles screen printed and thickness between 8-10mm 1st quality, length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work. First Floor

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls First floor

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls in First floor

Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provision size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work. Window with 3 shutters (Center fixed shutter) and without Grill Window made of Outer Frame of size 90mm x 50mm.i) Center Shutter Fixed: center shutter frame made of section with size 20mm x 47mm of 0.58mm thick should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mmof 0.58mm thick fixed horizontally on top and bottom of the shutter frame. BMT-P.43

Supplying, fitting and placing MS grilled door, windows, gate including fabrication charges and all incidental charges etc, cost and conveyance of all materials and all labour charges etc., complete. (make of materials - TATA, Jindal, Sail, Visakha)

Supply and fixing of 25mm dia 2.2mm thick P.V.C. pipe (ISI Mark) concealed in Roof Slabs with all required accessories including masonary work and labour charges including over heads and contractors profit but excluding seigniorage charges for finished item of work.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges including over heads and contractors profit but excluding seigniorage charges for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and fixing of 6A 3 pin wall plug Module Modular Socket with a 6A Modular Switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16A 3pin flush type modular switch Module Modular Socket combined (2 in 1) duly recessed in wall with Hot Dip galvanized 18 SWG Module metal box covered with Modular Vertical Cover Frame including earth connections and all labour charges etc., complete.

Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II.

Fixing of 20W LED light luminaire on wall/ ceiling with/ Tw round blocks with all accessories including giving connections and all labour charges etc., complete.

Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Supply of 2 Module Modular type Electronic step type Fan Regulator including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation) including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Providing independent earthing by excavating a trench to a depth of 2.1M in all soils, as per size specified in the Data, using 40mm dia. 'B' class GI pipe of 2.5 Mtrs Length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters including over heads and contractors profit but excluding seigniorage charges and VAT for finished item of work.

Supplying and fixing stainless steel hand railing, balustrade etc using 304 or 202 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials buffing charges polishing charges etc complete for finished item of work.

Providing for writing Name Board