REPAIR AND MAINTENANCE OF PUMPS, PANELS AND ALLIED WORKS IN WATER SUPPLY INSTALLATION OF AA JODHPUR

Amount

M & L for routine check up of soft starter of capacity 50 to 150 HP pumping set, downloading of real time data and past data complete, print out of the same and produce to Engr-in-Charge duly recommending the maint required, replacement of the parts which are not working properly. All parts shall be measured and paid seperately here-in-after. Maint shall be carried out by OEM maint engineer only & proper setting of O/L, running, starting / stopping, ramping time with proper measurememnt of each & every set of starter. Mainly HMI module, PCB, CT, Fan, Thyristor and by pass. Complete all as directed by Engr-in-Charge at site.

Supply only in replacement of control card (Motor ctrl kit) as per existing No, type, make & model.

Supply only in replacement of Thyrister of capacity as per existing No, Type, make & model of following capacity:- (a) upto 105 Amp

(b) Upto 200 amp

(c ) Upto300 amp

Supply only in replacement of soft starter body cover including (end plate / top plate) upper bar holder / lower bar holder, complete as per existing No, type, make & model of following capacity:- (a) Upto 105 Amp

(b) Upto 200 amp

(c ) Upto300 amp

Supply only in replacement of Snubber circuit kit complete as per existing No, type, make & model of following capacity:- (a) upto 135 Amp

(b) Upto 200 amp

Supply only in replacement of By pass contactor complete as per existing No, type, make & model of following capacity:- (a) upto 135 Amp

(b)Upto 250 amp

Supply only in replacement of LCD / LED display set (User interface module C1 M/R) of soft starter suitable to existing soft starter No, Make & model (HMI Module / Analouge setting panel).

Supply only in replacement of terminal connector male & female for soft starter of existing type, No & model, complete set of one No soft starter, No of set as per model of starter.

Supply only in replacement of power terminal Phase arm assembly complete as per existing No, type, make & model.

M & L for routine check up of soft starter of capacity 5 to 50 HP pumping set, downloading of real time data and past data complete, print out of the same and produce to Engr-in-Charge duly recommending the maint required, replacement of the parts which are not working properly. All parts shall be measured and paid seperately here-in-after. Maint shall be carried out by OEM maint engineer only & proper setting of O/L, running, starting / stopping, ramping time with proper measurememnt of each & every set of starter. Mainly HMI module, PCB, CT, Fan, Thyristor and by pass. Complete all as directed by Engr-in-Charge at site.

All as per item No. 02 here-in-above but capacity 5 HP to 50 HP motor pump set starter.

All as per item No. 03 here-in-above but capacity 5 HP to 50 HP motor pump set starter upto 105 Amp.

All as per item No. 04 here-in-above but capacity 5 HP to 50 HP motor pump set upto 105 Amp.

All as per item No. 05 here-in-above but capacity 5 HP to 50 HP motor pump set upto 135 Amp.

All as per item No. 06 here-in-above but capacity 5 HP to 50 HP motor pump set upto 135 Amp.

All as per item No. 07 here-in-above but capacity 5 HP to 50 HP motor pump set

All as per item No. 08 here-in-above but capacity 5 HP to 50 HP motor pump set.

All as per item No. 09 here-in-above but capacity 5 HP to 50 HP motor pump set.

M&L for Cutting of existing panel & mounting of fresh air Fan of Size 75mm to 150 mm, mounting with steel fastners of suitable size 230V AC 50 Hz including complete wiring of fan and switching system with temprature sensor for cooling of starter panel with provision of sieve complete to avoid entry of dust particle & modification / provision of cover as per panel condition. Complete all as directed by Engr-in-Charge at site.

M & L for cutting of existing panel & making of exhaust fan of size 75mm to 150mm, mounting 230V AC including complete wiring of fan and switching system with temp sensor for exhaust of warm air inside the panel with panel cover complete all as directed by Engr-in-Charge at site.

Supply only power contactor of capacity 15 Amp rating 415 Volt / AC-3 duty recommended to suit existing type, make & model to suit existing mounting space. Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 21 here-in-above but of capacity 20 Amp, Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 21 here-in-above but of capacity 30 Amp, Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 21 here-in-above but of capacity 40 Amp, Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 21 here-in-above but of capacity 50 Amp, Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 21 here-in-above but of capacity 60 Amp, Make - L&T, ABB, C&S, Siemens, Havells, BCH.

Supply only stop push botton. Make - L&T, ABB, C&S, Siemens, Havells, BCH.

Supply only start push botton. Make - L&T, ABB, C&S, Siemens, Havells, BCH.

Supply only O/L relay of range 6 Amp to 10 AMP. Make - L&T, ABB, C&S, Siemens, Havells, BCH.

All as per item No. 29 here-in-above but for O/L relay of range 20 Amp to 30 AMP.

All as per item No. 29 here-in-above but for O/L relay of range 30 Amp to 50 AMP.

All as per item No. 29 here-in-above but for O/L relay of range 50 Amp to 75 AMP.

All as per item No. 29 here-in-above but for O/L relay of range 75 Amp to 85 AMP.

All as per item No. 29 here-in-above but for starter of capacity of 50 HP to 150 HP Star Delta / DOL starter

All as per item No. 21 here-in-above but of capacity 65 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 21 here-in-above but of capacity 70 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 21 here-in-above but of capacity 100 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 21 here-in-above but of capacity 200 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 21 here-in-above but of capacity 250 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 21 here-in-above but of capacity 300 Amp. Make - Simens/ L&T / ABB / C&S / Havells

All as per item No. 29 here-in-above but for O/L relay capacity 50 to 100 AMP.

All as per item No. 29 here-in-above but for O/L relay capacity 90 to 150 AMP.

All as per item No. 29 here-in-above but for O/L relay capacity 150 to 200 AMP.

All as per item No. 29 here-in-above but for starter of autotransform type

M&L for rewinding of autotransformer unit of A/T starter complete with winding wire of super enamelled Impregnated copper wire of existing size and type complete with empire tape, glass tape, impregnated paper, bamboo Chips etc & transporting from panel place to wksp and back, reconnection after completion and testing of load, all as directed by Engr-in-Charge.

M&L for electrical disconnetion of submersible pump for taking out exixting column pipe of size 80 mm from borewell with essential tools like tripod, chain, pully, etc and manpower & replacement of unserviceable parts of column pipe motor pump etc as per requirement, column pipe shall be measured and paid seperately, lowering of submersible pumping set with column pipe complete and testing after completion of work all as directed by Einr-in-Charge.

All as per item No. 46 here-in-above but of size 50 mm dia -ditto-.

All as per item No. 46 here-in-above but of size 32 mm dia -ditto-.

M&L for replacement of GI heavy duty flanged column pipe of size 80 mm dia with flanged including cut for cable with PVC strap tie lockable type, nut, bolt, washer including PVC cable lockable type complete of length 3 Mtrs. Complete all as directed by Engr-in-Charge.

All as per item No. 49 for size 50 mm dia.

All as per item No. 49 for size 32 to 40 mm dia.

M&L for repair of submersible pump set, strip opening multi stage submersible pumpset of capacity 5-10 HP. Replacement of unsv parts & reassembling the same, testing after completion of of job & spare parts shall be measured & paid seperately here-in-after. Complete all as directed by Engr-in-Charge.

Repair and replacement of parts of impeller set of capacity 5 to 10 HP submersible pump set of stages minimum 03 to maximum 20 with bowl. (a) Impeller Set

(b) Bowl set

Replacement of thrust bearing of submersible pump set capacity 5 to 10 HP.

Replacement of sealing 'O' ring (Rubber mechanical seal)

Replacement of impellor driving rod (shaft) complete of capacity 5 to 10 HP.

M&L for strip opening of submersible pump motor of capacity 01 to 05 HP, rewinding with super enamelled pre-insulationed copper winding wire of existing size of copper wire with insulated paper / bamboo clips empire tape / glass tape etc, including repair of pump by replacement of US spare parts & tesing after completion of job.

M&L for repair of centrifugal pumping set of size up to 150 HP strip opening of case of pumping set. Repair / replacement of unsv parts & reassembling the same & testing after completion of work. Spare parts shall be measured & paid seperately here-in-after, as directed by Engr-in-Charge.

Replacement of impellor with all acessories for pumping set upto the capacity of 150 HP pumping set.

Replacement of NDE bearing as per existing size, type, make & model.150 HP

Replacement of DE bearing as per existing size, type, make & model.150 HP

M&L for straightening of shaft of pump as per existing size, type, make & model.150 HP

Replacement of pump shaft as per existing size, type, make & model. For capacity 100 to 150 HP

All as per item No. 58 here-in-above but for capacity 50 HP to 80 HP

All as per item No. 59 here-in-above but for capacity 50 to 80 HP.

All as per item No. 60 here-in-above but for capacity 50 to 80 HP.

All as per item No. 61 here-in-above but for capacity 50 to 80 HP.

All as per item No. 62 here-in-above but for capacity 50 to 80 HP.

All as per item No. 63 here-in-above but for capacity 50 to 80 HP.

All as per item No. 58 here-in-above but for capacity 10 HP to 50 HP.

All as per item No. 59 here-in-above but for capacity 10 to 50 HP.

All as per item No. 60 here-in-above but for capacity 10 to 50 HP.

All as per item No. 61 here-in-above but for capacity 10 to 50 HP.

All as per item No. 62 here-in-above but for capacity 10 to 50 HP.

All as per item No. 63 here-in-above but for capacity 10 to 50 HP.

All as per item No. 58 here-in-above but for capacity 05 HP to 10 HP monoblock pump set.

Replacement of impellor with all acessories complete in all respect of capacity 05 HP to 10 HP

All as per item No. 58 here-in-before but for capacity of 01 to 05 HP monoblock pump set.

Replacement of impeller with all acessories complete in all respect. for capacity of 01 to 05 HP

M&L for strip opening of electric motor after electrically disconnecting 150 HP pump and rewinding / replacement of unsv parts & reassembling the same & testing on load at existing place in presence of Engr-in-Charge. transporting from wk place to wksp & wksp to wk place shall be deemed to be included, all other spare parts / rewinding wk, material shall be measured and paid seperately here-in-after. All as directed by Engr-in-Charge.

Rewinding of motor of capacity 150 HP with superenamelled pre-insulationed copper winding wire of existing size of copper wire with insulated paper / bamboo chips, empire tape / glass tape etc & tesing after completion of job.

Replacement of NDE bearing as per existing size, type, make & model.

Replacement of DE bearing as per existing size, type, make & model.

Replacement of cooling fan as per existing size, type, make & model.

All as per item No. 80 here-in-above but for capacity 75 HP to 100 HP

All as per item No. 81 here-in-above.but for capacity 75 HP to 100 HP

All as per item No. 82 here-in-above.but for capacity 75 HP to 100 HP

All as per item No. 83 here-in-above.but for capacity 75 HP to 100 HP

All as per item No. 84 here-in-above.but for capacity 75 HP to 100 HP

All as per item No. 80 here-in-above but for capacity 50 HP to 75 HP

All as per item No. 81 here-in-above. but for capacity 50 HP to 75 HP

All as per item No. 82 here-in-above. but for capacity 50 HP to 75 HP

All as per item No. 83 here-in-above. but for capacity 50 HP to 75 HP

All as per item No. 84 here-in-above. but for capacity 50 HP to 75 HP

All as per item No. 80 here-in-above but for capacity 30 HP to 50 HP

All as per item No. 81 here-in-above.but for capacity 30 HP to 50 HP

All as per item No. 82 here-in-above.but for capacity 30 HP to 50 HP

All as per item No. 83 here-in-above.but for capacity 30 HP to 50 HP

All as per item No. 84 here-in-above.but for capacity 30 HP to 50 HP

All as per item No. 80 here-in-above but for capacity 10 HP to 30 HP

All as per item No. 81 here-in-above.but for capacity 10 HP to 30 HP

All as per item No. 82 here-in-above.but for capacity 10 HP to 30 HP

All as per item No. 83 here-in-above.but for capacity 10 HP to 30 HP

All as per item No. 84 here-in-above.but for capacity 10 HP to 30 HP

All as per item No. 80 here-in-above but for capacity 5 HP to 10 HP

All as per item No. 81 here-in-above.but for capacity 5 HP to 10 HP

All as per item No. 82 here-in-above.but for capacity 5 HP to 10 HP

All as per item No.83 here-in-above.but for capacity 5 HP to 10 HP

All as per item No. 84 here-in-above.but for capacity 5 HP to 10 HP

All as per item No. 80 here-in-above but for capacity 3 HP to 5 HP

All as per item No. 81 here-in-above.but for capacity 3 HP to 5 HP

All as per item No. 82 here-in-above.but for capacity 3 HP to 5 HP

All as per item No. 83 here-in-above but for capacity 3 HP to 5 HP.

All as per item No. 84 here-in-above.but for capacity 3 HP to 5 HP

All as per item No. 80 here-in-above but for capacity 2 HP to 3 HP

All as per item No.81 here-in-above.but for capacity 2 HP to 3 HP

All as per item No.82 here-in-above.but for capacity 2 HP to 3 HP

All as per item No. 83 here-in-above.but for capacity 2 HP to 3 HP

All as per item No. 84 here-in-above. but for capacity 2 HP to 3 HP

All as per item No. 80 here-in-above but for capacity 1 HP to 2 HP

All as per item No. 81 here-in-above.but for capacity 1 HP to 2 HP

All as per item No. 82 here-in-above.but for capacity 1 HP to 2 HP

All as per item No. 83 here-in-above but for capacity 1 HP to 2 HP.

All as per item No. 84 here-in-above.but for capacity 1 HP to 2 HP

All as per item No. 80 here-in-above but for capacity 0.5 HP to 1 HP

All as per item No. 81 here-in-above. but forcapacity 0.5 HP to 1 HP

All as per item No. 82 here-in-above. but for capacity 0.5 HP to 1 HP

All as per item No. 83 here-in-above. but for capacity 0.5 HP to 1 HP

All as per item No. 84 here-in-above. but for capacity 0.5 HP to 1 HP

Hiring of JCB with operator & fuel for mechanical work at site / as spl task work as and when demanded, record shall be maintained for hours run on register and duly signed by Engr-in-Charge.

Hiring of cranes of load haulage capacity not less than 5 ton upto 14 ton with operator & fuel for mechanical work at site / as spl task work as and when demanded. Record of hiring shall be maintained on register as per running hrs, register shall be duly singed by Engr-in-Charge on same date and shall be part of work and handover to Engr-in-Charge duly completed.

Hiring of forklift of load haulage capacity not less than 1 ton upto 5 ton with operator & fuel for mechanical work at site / as spl task work as and when required. Record of hiring shall be maintained on register as per running hrs, register shall be duly singed by Engr-in-Charge on same date and shall be part of work and handover to Engr-in-Charge duly completed.

M&L for routine maint of pump / motor set complete of size 100 to 150 HP. SKF high performance, high temperature superior quality pump & motor bearing grease of model - SKF LG HP 2/18 or equivalant quality of make castrol / Valvoline etc, nut / bolts, complete with repair / replacment of unsv acessories like cooling pipe/ drain pipe, washer, etc complet. All items like hose set nipple, washer bll valve etc shall be deemed to be included in repair. Record shall be maintained in register duly singed by Engr-in-Charge on same date, maint shall be done once in a month for 11 months.

M&L for routine maint of pump / motor set complete of size 70 to 100 HP. SKF high performance, high temperature superior quality pump & motor bearing grease of model - SKF LG HP 2/18 or equivalant quality of make castrol / Valvoline etc, nut / bolts, complete with repair / replacment of unsv acessories like cooling pipe/ drain pipe, washer, etc complet. All items like hose set nipple, washer bll valve etc shall be deemed to be included in repair. Record shall be maintained in register duly singed by Engr-in-Charge on same date, maint shall be done once in a month for 11 months.

All as per item No. 133 but for size 10 to 70 HP for electric motor.

All as per item No. 133 but for size 3 to 10 HP for electric motor.

M&L for repair / replacement of unsv parts of air blower /compressor, strip opening of compressor, transporting from site to wksp & wksp to site shall be deemed to be included in quoted rates. Spare parts shall be measured and paid seperately here-in-after. Reassembling of the same after repair & testing on site all as directed by Engr-in-Charge.

Replacement of NDE pully as per existing size, type, make & model.

Replacement of NDE bearing as per existing size, type, make & model.

Replacement of compressor oil as per OEM recommended grade.

Replacement of case housing as per existing size, type, make & model.

Repair/replacement of twin lobe rotary blower with gears as per existing size, type, make & model.

Replacement of V-rubber belt as per existing size, type & make (set of three). Make- Fenner or equivalent

Rewinding of motor of submersible pump set of capacity 7.5 to 12 HP with super enamelled PVC insulated copper conductor wire complete with all insulating material. Impregnated paper, empire tape, glass tape, cotton tape, bamboo chips & testing on completion. Tpt of pump from site to wksp and wksp to site deemed to be included in quoted rates

All as per item No. 140 but for capacity 5 to 7.5 HP for electric motor.

All as per item No. 140 but for capacity 0.25 to 1 HP for electric motor.

M&L for replacement of motor protection relay having phase sequence controller as per existing or to suit the existing circuit up to 800 Amp

M&L for replacement of single phasing preventor of existing size, type, make & model up to 50 Amp.

M&L for replacement of indicator lamp 230 V AC LED type of Red colour.

M&L for replacement of indicator lamp 230 V AC LED type of yellow color

M&L for replacement of indicator lamp 230 V AC LED type of Blue color

M&L for replacement of indicator lamp 230 V AC LED type of Green color

M&L for replacement of multifunction meter of suitable size to suit the existing panel as per existing size, type, make & model. Make - L&T, Series4040/4400/4405/4408, ABB / Siemens, GE.

M&L for replacement of digital voltmeter to suit existing panel as per existing type, make & model.

M&L for replacement of digital Amp meter to suit existing panel as per existing type, make & model.

S&F timer micon series, 175 - 240 Volt AC on delay 3 to 120 seconds with 1 NO / 1 NC contacts. Make - L&T / BCH / ABB / Siemens

Hour meter HM 36-92-264/ 270-440V with complete , Cat No. 3046B1. Make - L&T / BCH / ABB / Siemens

M&L for replacement of Flex board of installations size 5 feet x 3 feet on star paper with square steel frame complete in all respect as directed

M&L for replacement of Kit fan Assembly for soft starter of range 184 to 250 A

M&L for replacement of Kit fan Assembly for soft starter of range 25 to 135 A

Dwarka Enterprises