Janpad Pilibhit main head works khand sharda nahar bareilly ke antragart gram pipariya santosh main vibhagiye bhumi par chardiwari, gate evam puliya ke nirman ka karye.

Amount

Earth work in foundation in dry ordinary soil (loam clay or sand) including lift upto 1.5m and lead upto 30m and back filling, watering and ramming of excvated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by Engineer-in-charge upto distance of 30m from the foundation trenches. also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Laying C.C.(1:4:8) with P.C.C. Cement, coarse sand and Stone ballast 20 to 40mm also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Centering and Shuttering of C.C work for slab, lintels, sun shades, columns & wall etc. also including all cost of rent of Shuttering material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Centering and Shuttering for R.C.C work including cost of Centering & Shuttering including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

R.C.C in 1:1.5:3 cement. Coarse sand and Stone Grit 6 to 12 mm also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Laying C.C in 1:1:2 cement. Coarse sand and Stone Grit 6 to 12 mm also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Mild steel of T.M.T Bars in Reinforcement Cement Concrete work to required shape as necessary including cost of Binding wire & bending for proper completion of the work and including supply of all steel and wastages and over lapping and hooks also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Class 10 / M-100 brick work in 1:6 cement and sand mortar with all lift and lead of material also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Sand filling in plinth under floors including Supply of necssary quantity of sand fron a distance not exceeding 8km from the site of work & including watering, dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work.

Class 10 / M-100 brick work in 1:4 cement and sand mortar with all lift and lead of material also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Cement plaster 1:4 on Brick masonery with cement sand mortar with all lift and lead of material also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

25 mm thick D.P.C. in C.C. 1:2:4 with cement, coarse sand & grit 6 to 12 mm size including water proofing compound in the proportion as specified by the manufacturers including cost of all materials, labour, T&P etc. complete

Painting in D.P.C. with two coat of airblown bitumen 85/50 or 85/25 @ about 1.7 kg/ sqm including cost of fuel if any also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Finishing walls with water proofing cement paint of approved made such as super snowcem, Durrocem, Robiacem Guttucem, supermen quality of required shade on uncoated wall surface (two coat) over one coat white cement primer to give even shades after throughly brushing the surface of remove all dirt and remains of loose powdered material also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Mild steel or iron work of small section such as holding dorn bolts, hold fast, tie roads, grantings etc. wrought to required form, including of supply of steel, bolts, nuts, wastage and fixing also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Two coat painting over priming coat including cost of ready mix primer on steel and other metal surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stooping, paint shall be used as per standard I.S. specification also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Earth work in embankment by power tranported earth with all lead and lifts including excavation, loading, unloading, manual compaction, dressing complete excluding royalty will be applicable from time to time on Govt. orders also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

Supply and fixing of 12.5 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 3mm, top minimum100mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3. & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes,0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates etc Complete in all respect. as per direction and satisfaction to the Engineer-in-charge.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP65 and above Protection complete also including all cost of material, labour & T&P etc. for proper completion of work as directed by Engineer in charge.

M/S BABY SHAHI

BALENDRA SINGH

M/S OM BALA JEE CONSTRUCTION