REPAIRS TO JOINERY, PLUMBING WORKS AND CERTAIN B/R REPAIRS IN HQ SWAC BLDG AND AUDITORIUM AT VSN CHILODA

Amount

Demolition of brickwork or stone/ boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for repairs 25mm thick Dholpur stone to match with existing design louvers and jallies fixed with SS L shaped brackets, including all moulding frame complete all as specified and as directed.

M&L for fixing of toughened glass of thickness n. exc. 12mm of area exc. 2.50 Sqm cut to shape reqiured with rounded edges fixed with chromium plated screws to floors and walls including necessary fittings and including taking down complete all as specified and as directed.

M&L for fixing of toughened glass of thickness n. exc. 12mm and area n. exc. 1.0 sqm cut to shape reqiured with rounded edges fixed with chromium plated screws to floors and walls including necessary fittings and including taking down complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth with 3% WPC (without using extra lime or cement) complete all as specified and as directed.

M&L for preparing of previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preparing previously unterated surfaces of wall and applying two coats of acrylic emulsion (weather coat) painting over a coat of primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc. laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for virified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match but on vertical surfaces/ skirting laid over and including 10mm thick rendering in CM (1:4) as backing coat complete all as specified and as directed.

M&L for treatment of wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over and including cement screed in CM (1:4), 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, laid over and including cement screed in CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 over 75mm thick PCC (1:4:8) type D2 as in repairs of plinth complete all as specified and as directed.

M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub floors, floor bases,or for water tank bases on slab and paving etc complete Finished even & smooth using extra cement all as specified and directed.

S&F in repairs vitreous china white wash hand basin oval type over/ under counterwash basin 560mm x 470mm complete all as specified and as directed

S&F in repairs 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

S&F in repairs vitreous china urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

Fixing only in repair cast iron 100mm bore spun cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed. Note:- cast iron pipe will be issued under Sch 'B' free for fixing.

Fixing only in repair cast iron 75mm bore spun cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed. Note:- cast iron pipe will be issued under Sch 'B' free for fixing.

Fixing only in repair cast iron 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. Note:- cast iron bend will be issued under Sch 'B' free for fixing.

Fixing only in repair cast iron 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. Note:- cast iron bend will be issued under Sch 'B' free for fixing.

Fixing only in repair cast iron 75mm bore vent cowls complete all as specified and as directed. Note:- cast iron cowl will be issued under Sch 'B' free for fixing.

Fixing only in repair cast iron 100mm bore vent cowls complete all as specified and as directed. Note:- cast iron bend will be issued under Sch 'B' free for fixing.

S&F in repair cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair cast iron nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110mm bore any radius complete all as specified and as directed.

S&F in repairs PVC "P" trap 125/ 110mm complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of pattern `long pan', size 580mm white with `P' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) complete all as specified and as directed.

S&F in repairs grating doom 150x150mm of brass chromium plated all as specified and directed.

Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and as directed.

Fixing only 15mm dia tubes ‘medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Note:- GI tubing will be issued under Sch 'B' free for fixing.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15mm bore complete all as specified and as directed.

S&F in repairs bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Cera Cat Part No. CP 104 or equivalent make as approved by GE.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Cera Cat Part No. CP 109A or equivalent make as approved by GE.

S&F in repairs pillar taps with Aquisense Sensor, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Jaquar Cat Part No. SNR-CHR-51011 or equivalent make as approved by GE.

S&F in repairs sensor, for urinal chromium plated, screwed down high pressure, with or without lettered screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore complete all as specified and as directed. Make:- Jaquar/ Cera/ Hindware as approved by GE.

S&F in repairs CP angle cock 15mm bore complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs 32mm PVC waste pipe for wash hand basin/ urinal/ sink 600mm long complete all as specified and as directed.

S&F in repairs brass chromium plated 32mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repair aluminium anodised plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs toilet paper holder complete all as specified and as directed.

Taking down aluminium door and resecuring or easing & adjusting and refixing in same opening for shutter n. exc. 2.0 Sqm complete all as specified and as directed.

S&F in repairs 5.50mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt 150mm long extruded section complete all as specified and as directed.

All as per Item No. 56 above but 100mm long.

S&F in repairs aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs stainless steel butt hinges medium weight cold rolled of size 100mm by fixing to existing frame complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply, fabricate and fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window (two shutters glazed) with frame, glazed with 4.0mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc. all as specified below, including taking down old window complete all as specified and as directed. (a) Frame (top & side) section shall of size 92.00mm x 31.75mm x 1.50mm. (Section No. 20831) (b) Frame (bottom) section shall of size 92.00mm x 31.75mm x 1.50mm. (Section No. 20832). (c) Top & side members of shutter section shall be be of size 18.00mm x 40.00mm x 1.55mm. (Section No. 20738). (d) Shutter Interlock section shall be be of size 18.00mm x 40.00mm x 1.45mm. (Section No. 20737). (e) Bottom Members of shutter section shall be be of size 18.00mm x 40.00mm x 1.55mm. (Section No. 20736).

S&F aluminium powder coated minimum thickness of powder coating 50 micron of approved colour ventilator, partially glazed and partially louvers, outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick half portion glazed with 3mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4.0mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperturer with 25mm x 3mm thick aluminium strip with screw to upper half portion of ventilitor all fitting and fixture and fixed in position including taking down of old ventilator complete all as specified and as directed.

S&F aluminium anodized door shutter, aluminium section weighing not less than 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing including aluminium anodized snap beading screw 5mm thick glass and 12mm thick prelaminated particle board with decorative choice lamination on both sides etc. including taking down old shutter complete all as specified and as directed. (a) 150mm handle - 02 Nos. (b) Mortice lock in built 3 lever - 01 No. in each shutter.

Supply only aluminium sections suitable for doors, windows and ventilators for repairs to damaged part complete all as specified and as directed.

S&F in repair 4 levers brass Mortice lock vertical type, size 100mm complete all as specified and as directed.

M&L for preparation of surfaces old surface of wall and applying two coats of oil bound distemper over and including 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surface of wall and applying one coat of oil bound distemper complete all as specified and as directed.

S&F in repair door closer hydraulically aluminium extruded section body regulated designation No. 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match with vision panels or peep holes, square or rectangular including lipping (supplying and fixing of glass measured separately) and fixed to chowkhats complete all as specified and as directed.

Taking down chowkhats or frames exc. 1.5 sqm and n. exc. 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames n. exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed.

S&F in repairs stainless steel handles 100mm size, fancy type for wall mounted cupboard complete all as specified and as directed.

S&F in repairs aluminium handles 150mm size, cast type, with brass coating complete all as specified and as directed.

M&L for 18/ 19 mm thick prelaminated particle board in repairs, exterior grade, prelaminated both side decorative choice lamination fixed with aluminium frame work complete all as specified and as directed.

Fixing only in repairs 500Ltrs capacity triple layer rotational moulded polythene water storage tanks (cylindrical vertical with closewed top) hoisted and fixed on roof in position over existing PCC platform including all fittings such as connection pipe pieces with GI tank nipplle for inlet, outlet, washout and over flow etc and including fixing only ball valves complete all as specified and as directed. Note:- water storage tank will be issued under Sch 'B' free for fixing.

S&F in repairs ball valve up to 40mm bore complete all as specified and as directed.

S&F in repairs sinks with drainage board made of high grade stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair health faucet with flexiable stainless steel hose and hook complete all as specified and as directed. Make:- Jaquar Cat No ALD-IVY-585 or equivalent make as approved by GE.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair single piece vitreous china wash down water closet pan (pedestal pattern) of Size 680mm x 360mm x 765mm conseled type, white (excluding fixing bolts, flushing cistern and flush pipe seat cover with twin flush setting) complete all as specified and as directed.

S&F in repair cylindrical lock 6 levers best quality with SS and duplicate keys for built in wooden door complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc. from 500 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks, setting aside (or lowering if required) for cleaning etc. and reconnecting and refixing in position complete all as specified and as directed.

M&L for repairs to wall cracks by cutting grooves and filling with cement mortar (1:3) using of apoxy resin complete all as specified and as directed.

S&F in repairs sliding lock of aluminum window complete all as specified and as directed.

Dismantling of wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling size of grid 605mm x 605mm complete all as specified and as directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40mm x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed.

S&F in repair position glass bricks of approved make of size 195mm x 195mm x 80mm with white cement (1:1) at all heights, with necessary PVC frame etc complete all as specified and as directed.

M&L for 60mm machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS : 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in repairs pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs magnetic catches of size n. exc. 50mm x 15mm, complete all as specified and as directed.

S&F in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for demolishing existing tiles and taking down carefully any type of water closet or Nahani/ floor trap and demolishing cement concrete in sunken floor slab upto 450mm and applying one coat of cold applied bituminous primer @ 250 grams/ sqm on plastered surfaces including side walls. Thereafter a layer of APP modified membrane in sunken portion over side walls up to the finished floor level shall be plastered with 15 mm thick in cement mortar (1:4), mixed with water proofing compound at the rate of 3% by weight of cement.and filling and mass concrete PCC (1:5:10) type E2 (using 40mm graded stone aggregates) complete all as specified and directed with 3% WPC to weight of cement after satisfactory testing of CI pipes/ joints and slab/ walls by filling water for 72 hours and refixing the the water closet or Nahani/ floor trap and fixing Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) and removing demolished material outside MD land. Note:- CI pipe/ Nahani/ floor trap to be measured and paid seperately.

S&F in repairs 1000 Ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F in repairs polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover complete all as specified and as directed.

M&L chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment, set jointed in neat cement slurry complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in floor finishes and pavings complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Shree Builders

Ramdev and Sons