Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.7 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹3.8 L+₹14,381.11 (3.89%)Rejected-AOC KERALA KL | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | NERIAHTECHNOLOGIES AND SYSTEMS L1 | SAJAN DANIEL L2 |
|---|---|---|---|---|---|
| 1.00Maintenance | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 0.7 | cum | 300 ₹210.6 | 257 ₹180.41 Lowest |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 9.36 | sqm | 220 ₹2,059.2 Lowest | 320 ₹2,995.2 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.4 | cum | 8,000 ₹11,232 Lowest | 8,400 ₹11,793.6 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 579.22 | kg | 172 ₹99,625.84 | 169 ₹97,888.18 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 623 | kg | 198 ₹1,23,354 Lowest | 208 ₹1,29,584 |
| 1.01 | OD382030/2025-2026:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.35 mm thick with zinc coating not less than 275 gm/m2 | 49.1 | metre | 370 ₹18,167 | 335.2 ₹16,458.32 Lowest |
| 1.01 | OD238797/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 151.2 | sqm | 590 ₹89,208 | 559 ₹84,520.8 Lowest |
| 1.01 | OD52551/2026-2027:Supplying& jointing75mm4kgPVCdown pipe with necessaryspecials | 30 | metre | 240 ₹7,200 | 237 ₹7,110 Lowest |
| 1.01 | OD52552/2026-2027:: Providing &fixing rain water gutter pipe semi circular150mm diametre | 77.4 | metre | 240 ₹18,576 Lowest | 432.6 ₹33,483.24 |
Tender Value
₹4.2 L
EMD Value
₹10,582
Closing Date
23 Jun 2026, 9:00 amClosed
ASSISTANT ENGINEER
OFFICE OF THE ASSISTANT ENGINEER KOTTARAKKARA MUNCIPALITY
Genaral Work- Annual Plan- Pro.No- 430/2025-26- Kottarakkara Municipality Annual Plan Rennovation of Municipality Owned Buildings
2026_LSGD_854945_20
01
Open Tender
Civil Works - Buildings
Item Rate
KOTTARAKKARA
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
₹10,582
Yes
29 Sept 2026
15 Jun 2026
24 Jun 2026
15 Jun 2026
23 Jun 2026
15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance | |||||
| 1.001 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | - | cum | - | - |
| 1.002 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 1 | sqm | - | - |
| 1.003 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.005 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | OD382030/2025-2026:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.35 mm thick with zinc coating not less than 275 gm/m2 | - | metre | - | - |
| 1.007 | OD238797/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.008 | OD52551/2026-2027:Supplying& jointing75mm4kgPVCdown pipe with necessaryspecials | - | metre | - | - |
| 1.009 | OD52552/2026-2027:: Providing &fixing rain water gutter pipe semi circular150mm diametre | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1446387.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
PRE.pdf
Tender Documents • 0.33 MB
AFF.pdf
Tender Documents • 0.21 MB
FOT.pdf
Tender Documents • 0.33 MB
BOQ_1446387.xls
BOQ • 0.30 MB
EPAY.pdf
Tender Documents • 0.32 MB
IPACCT.pdf
Tender Documents • 0.27 MB
SBD.pdf
Tender Documents • 2.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .