Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹16.5 L+₹14,074.90 (0.86%)Accepted-AOC | L2 | Accepted-AOC L2 | |
| 3 | L3₹19.4 L+₹3.0 L (18.0%)Accepted-AOC | L3 | Accepted-AOC L3 |
Tender Value
₹17.6 L
EMD Value
₹43,980
Closing Date
25 Oct 2023, 3:00 pmClosed
Executive Engineer
P H Division South Observatory Hills Thiruvananthapuram
URBAN AGGLOMERATION THIRD PHASE 2023 24 REPLACING EXISTING LINE WITH 160mm PVC PIPE FOR IMPROVING WATER SUPPLY TO BUND ROAD OF NEDUNGADU WARD UNDER KARAMANA SECTION
2023_KWA_613766_1
TR/799/2023_26_1_1/1
Open Tender
Civil Works - Water Works
Item Rate
180 days
P H Division South
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,760
₹43,980
Yes
10 Jan 2024
17 Oct 2023
27 Oct 2023
17 Oct 2023
25 Oct 2023
17 Oct 2023
Amount
Appendix A
15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road
15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)
15.24:Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material with in 50 metes lead:
100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.
100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.
100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes.
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
OD203751/2022-2023:Taking connection from the existing main(single boring), supplying and fitting 25mm saddle piece 1 no, boring the main, supplying and fitting 25mm brass ferrule 1no, 25mm GM full way wheel valve 1no, bend 1 no, union 1no etc. and connecting the newly laid main, testing the joints etc. complete
OD203752/2022-2023:Taking connection from the existing main(double boring), supplying and fitting 25mm saddle piece 2 no, boring the main, supplying and fitting 25mm brass ferrule 2no, 25mm GM full way wheel valve 2no, bend 2 no, union 2no etc. and connecting the newly laid main, testing the joints etc.complete
OD203753/2022-2023:Alteration of house connection/street tap connection including earthwork excavation, supplying and fitting suitable saddle piece, supplying and fitting 20 mm brass ferrule 1no,20 mm GM full way wheel valve 1no,Tap ,20mm ASTM Sch-80 pipe and other specials, other specials etc. and connecting the newly laid line, testing the joints etc. as per the direction of departmental officials.
100.98.484:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 150mm.
100.31.1.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class I.
OD203754/2022-2023:Conveying CI MH cover with frame from the departmental store to site and placing in position etc. Complete
OD203756/2022-2023:Supplying labour for valve controlling valve , controlling traffic
100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.
100.98.1008:Engaging Coolie.
100.98.1009:Engaging Fitter ( grade 1).
Appendix B-Valve Chamber
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
Appendix C
100.98.239:Supply of PVC Pipe, 10kg/cm2, 160mm Dia.
OD203749/2022-2023:Supply of 25mm ASTM pipe
OD269717/2022-2023:160mm PVC 10Kg/cm2, 11 1/4 degree bend
OD269718/2022-2023:160mm PVC 10Kg/cm2, 221/2 degree bend
OD269720/2022-2023:160mm PVC 10Kg/cm2, 45 degree bend
OD269721/2022-2023:160mm PVC 10Kg/cm2, 90 degree bend
OD269722/2022-2023:160mm PVC 10Kg/cm2,end cap
Vinod K
Anoop AJ
Bidder Name
M ASHOK KUMAR
Vinod K
Anoop AJ
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .