Renovation work of additional office space at 7th Floor of Mayur Bhawan for Insolvency and Bankruptcy Board of India

S.No. Description of Works Amount (DSR, in Rs.)

1 Masonry & Plaster 1,54,679.40 90,000.00

3 Partitions & Wall Cladding 4,24,919.25 39,16,960.38

6 Finishes & Miscellaneous 3,57,011.00 14,39,596.12

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

S.No. DESCRIPTION QTY

DSR-2022 Ref. No. UNIT RATE (DSR 2021) AMOUNT MARKET RATE AMOUNT

CIVIL & INTERIOR WORKS

1 MASONRY AND PLASTER

Reinforced cement concrete work in beams, suspended floors, roofs having slope

up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases up to floor five level excluding the cost of centering,

1.1 5.3 shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded CUM 0.50 10,719.30 5,359.65

stone aggregate 20 mm nominal size).

1.2 Centering and shuttering including strutting, propping etc. and removal of form for :

1.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 5.00 608.35 3,041.75

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 50.00 89.65 4,482.50

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 20.00 1,018.05 20,361.00

1.6 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at 20.00

6.15 every third course of half brick masonry. SQM 86.45 1,729.00

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

1.7 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry, but

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 150.00 545.00 81,750.00

1.8 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or

half brick wall of mix.

1.9 13.4 12 mm cement plaster of mix

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

by applying cement slurry mixed with water proofing cement compound consisting

of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water

proofing cement compound @ 0.253 kg/sqm. This

1.10 22.5 layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 SQM 30.00 516.60 15,498.00

kg/ sqm mixed with water proofing cement compound @

0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonry

with polymer mixed slurry.

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm

1.11 MR thick POP Punning over cement plaster in line & plumb finished smooth to receive SQM 200.00 200.00 40,000.00

paint. (Internal surfaces of walls).

Demolishing/Dismantling of brick work, Partition Wall, cement concrete,wooden boardings, tile work

in floors/wall laid in cement mortar, doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc , W.C. Pan of all sizes, Dismantling of all dia G.I./ PVC

pipe, MS/ Alluminium Framing, Electrical Conduits including accessories (MS/PVC), GI Boxes,

Distribution Box, Existing wire/Cable, Fitting Fixtures, furnitures etc complete as direction by Engineer-

In charge.The item includes the disposal of moorum/building rubbish/ malba/ similar unserviceable,

dismantled or waste material by mechanical transport including loading, transporting, unloading to

approved municipal dumping ground for all lifts. Necessary permission/fee from statuary authority will

be arrange/bear by the contractor.

SUB TOTAL OF MASONRY AND PLASTER 1,54,679.40 90,000.00

2 PAVING AND WET WORKS

Digitally signed by

CHANDRESH KUMAR

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved

make, in all colours, shades except burgundy, bottle green, black of any size as

2.1 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm 55.00 1,063.45

thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,

of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles

must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with

the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

b 11.41A.2 Glazed vitrified floor tiles polished finish of size

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of

size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory,

2.3 11.40 Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse SQM 30.00 1,225.10 36,753.00

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with

white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed

2.4 11.46 of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3

kg/ sqm including grouting the joint with white cement & matching pigments etc.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix

of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg

2.5 11.48 of resin per kg), including filling / grouting and finishing complete as per direction

of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement

2.6 8.2 mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby Red

8.2.2.2 Area of Slab Over 0.5 Sqm SQM 15 4425.35 66,380.25

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

machine polishing to edge to give high gloss finish etc. complete as per design approved by

2.7 8.3 Engineer-in-Charge. Marble work

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and

toilets with Granite stone top (with straight edge polished nosing) complete with

base cabinet made of 20mm BWP board, outside surface (shutters) finished in 1mm

thick Laminate of approved shade. All internal surfaces to have balancing laminate.

2.8 MR The rate inclusive of necessary hardware, handle lock sets, self closing hinges, spring RMT 2.50 8,084.73 20,211.83

loaded shutter, latch inside, all cabinet hardware complete as per Architects approval.

(BR of stone to be taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

Digitally signed by

CHANDRESH KUMAR

Supply of modular carpet of approved model and shade and made with 100% nylon

6/6.6 tufted textured tiles of minimum 500mm x 500mm in size, stain resistant, anti

microbial, and having colour fastness to water, fastness to light, rubbing fastness and

castor chair suitability as per relevant standard for heavy commercial usage, with

100% PVC free Wellbac Function Backing with having average density 6000

oz/cu. yd. or more,Nominal total thickness of 5.9mm, and Pile weight – 16-18 oz/

2.9 MR sq yard. Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled SQM 20.00 2,160.00 43,200.00

content complying to GRIHA requirement, including fixing with GRIHA compliant

adhesive of approved make, minimum 15 years manufacturer's warrantee, all

complete as per drawings, manufacturer's specifications and direction of Engineer in

VINYAL FLOORING Providing and fixing of 6mm thick LG make or equivalent vinyl

flooring with shock absorption, sound insulation properties with a wearing layer of 0.6

2.1 MR mm thickness and weight of 4100 gm/m2 in floors including step after cleaning of SQM 193.00 3,100.00 5,98,300.00

existing concrete surface complete in all respect

TOTAL FOR PAVING & WET WORKS 7,44,569.01 6,61,711.83

3 PARTITIONS AND WALL CLADDING

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density)

particle board or graded wood particle board IS : 3087 marked, with one side decorative

and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,

3.01 9.18 in shelves with screws and fittings wherever required, edges to be painted with

polyurethane primer (fittings to be paid separately).

Cabinet Carcass- Providing and fixing Pre-laminated flat pressed 3 layer (medium

density) particle board or graded wood particle board IS : 3087 marked, with one side

decorative and other side balancing lamination Grade I, Type II exterior grade IS :

3.02 based on 9.18.2 12823 marked, in cabinet carcass with screws and fittings wherever required, edges SQM 25.00 1,501.00 37,525.00

to be painted with polyurethane primer (fittings to be paid separately).

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of

G.I. frame and required board, including providing and fixing of frame work made of

special section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having

equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing

of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

3.3 9.105 suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically

within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition

fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by

25 mm long dry wall screws on studs, floor and ceiling channels at the spacing

of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through

cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm

each) to be provided at the horizontal joints of two boards, fixed to the studs using

metal to metal flat head screws, including jointing and finishing to a flush finish

with recommended jointing compound, jointing tape, angle beads at corners (25 mm x

25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as

per manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

9.105.1 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: SQM 50.00 1,797.65 89,882.50

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre- laminated

flat pressed three layer particle board or graded wood particle board IS:12823 marked,

exterior grade (Grade l Type ll), having one side decorative lamination and other side

3.40 9.129 balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm SQM 20.00 1,982.70 39,654.00

thick with necessary screws and bright finished stainless steel piano hinges, complete as

per direction of the Engineer-in-Charge

Digitally signed by

CHANDRESH KUMAR

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall

paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick )

having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55

mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and

another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.

Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm

3.5 9.133 C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with

25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the

drawing & directions of engineer-incharge, the joints of the boards are finished with

specially formulated jointing compound and 48 mm wide jointing tape to provide

seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

Providing and fixing special quality bright finished brass cupboard or ward robe locks

3.60 9.79 with four levers of approved quality including necessary screws

3.70 Providing and fixing bright finished brass handles with screws etc.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool

conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G

Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and

in position by criss cossing GI wire etc. complete as per directions of Engineer-in-

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk.

Glass with anodised Aluminium frame fixing glass with snap on option consisting of top,

bottom and side frame measuring 40-46mm x 18mm-25mm complete with glazing

rubber as per manufacturer's specifications and instructions of Engineer- in-charge.

Rate include supply & Installation of 12 mm thk toughened glass with double sided

3.9 MR adhesive tapes for glass to glass butt joints. Partition system from FFL to False Ceiling SQM 155.00 5,500.26 8,52,540.30

level, inclusive of cost of support required for fixing in the ceiling. The frame to be

powder coated in desired shade as per the instructions of the Architect.

PARTITIONING- Partition using 12mm thick, 120mins fire rated ply fixed on both sides

on GI Studs Frame 50mm x 50mm x 1.5mm & 50mm x 60mm x 1.5mm as per

3.1 MR approved sample and architectural drawings placing the same 600mm c/c . GI frame SQM 250.00 4,563.73 11,40,932.50

to be fixed to floor and RCC Ceiling using fastners.

PANELLING- Panelling using 12mm thick, 120mins fire rated ply fixed on one side on GI

Frame 50mm x 25mm x 1.5mm as per approved sample and architectural drawings. GI

3.1 MR frame to be fixed to walls, floor and SQM 100.00 2,163.55 2,16,355.00

RCC Ceiling using fastners.

3.1 MR Cladding using 12mm thick HDHMR board on existing frame/ surface. SQM 10.00 1,148.57 11,485.70

VEENER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of

approved design and shade , cladded on to existing partitioning. Complete

Cladding to be finished using mellamine polish (gloss/matt) as approved by the

architect. (base rate Rs. 1450/- sqm)

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF,

3.1 MR on an existing Plywood surface. SQM 100.00 1,437.57 1,43,757.00

Providing and Fixing Channeled Woodworks perforated panels of width 192mm,

thickness of 15mm and length 2400 mm or as specified by the Architect/ approving

engineer, made of a high density fibre board with minimum 725 Kg/M3 density

substrate with a laminated facing as per the approved shade & finish and a melamine

balancing layer on the reverse side. The boards shall have a special perforation pattern

3.1 MR where the visible surface has a “Helmholtz” fluted perforation of 3mm width SQM 35.00 4,216.43 1,47,575.05

and 5mm/13mm/21mm of visible panel each. The edges of the panels shall be “tongue-

and-grooved” to receive special clips for installation. The back of the perforated panel

shall have sound absorbing non-woven acoustical fleece having NRC of 0.52-0.63. The

panels shall be mounted on special aluminium splines using clips. The works to be

done complete as per drawings and satisfaction of engineer-in-charge.

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick

complete with all necessary nails, hardware etc.

Digitally signed by

CHANDRESH KUMAR

Providing and fixing in position 2nd class teak wood cornice/ skirting/ moulding / beadingout

of following sizes as per detailed section and profile shown in the drawing with required

3.1 MR screws, dash fastners including melamine polish complete as directed by the Engineer in-

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS-

Cabinet Shutters out of 19mm Commercial Plybaord finished in 1mm Laminate of

base cost Rs. 380 per sqmt. Shutters to be fixed to a frame. Rigidly fixed on both sides

3.1 and top finshed in laminate. No internal carcass required. All Hinges of hettich or 2.00 12,724.04 25,448.08

equivalent. Internal Surface of the shutter in balancing white laminate. All shutters to be

provided with Stainless steel louvers at the top and bottom of the shutter as per the site

requirements and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 4,24,919.25 39,16,960.38

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required

size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

4.1 12.45 running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long.

Including jointing and finishing to a flush finish of tapered and square edges of

the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts

made with frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but excluding the cost of

painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- 225.00 2,57,838.75

4.2 300MM X 1200MM MINERAL FIBRE GRID - GRID CEILING Providing and fixing false

ceiling at all heights in true horizontal level suspended on inter-locking metal

powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick

on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile

(white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross -

T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of

size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm,

suspended from ceiling using galvanised mild steel items (galvanizing @ 80

grams per sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6 mm

dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of

size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40

mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic

rawl plugs at 450 mm center tocenter and 40mm long dry wall S.S screws. The

work shall be carried out as per specifications, drawing and as per directions of the

Engineer-in-Charge. With 15 mm thick Glasswool/Rockwool false ceiling tiles having

NRC upto 0.9, Light Reflectance upto 82% ,CAC-26 and Sag/Humidity Resistance

TRAP DOOR :- Providing and fixing trap door in false ceiling made of "Novapan

"pre-laminated board with hardwood framing, dead locks, lapping all around

including all hardware, hinges etc. complete as per

design and drawing.

Digitally signed by

CHANDRESH KUMAR

CEILING PELMETS :- Providing and fixed pelmet of overall size

150mmx150mm and made hardwood framings hung from ceiling @1000mm

4.5 MR centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk. RMT 50.00 1,022.47 51,123.50

Commercial ply on horizontal surface (straight &

curved). Inclusive of finishing in Paint.

WOODEN VENEER CEILING :- Providing and fixing wooden veneer ceiling by Fixing

Natural Teak Veneer on 12mm Underlay commercial Ply fixed to a subframe made using

50mm X 50mm Kiln seasoned and chmeically treated hollock wood fixed to RCC

ceiilng using Fastners . The cost to inlcude the finishing of the Veneer using wood

stain and clear coat of PU (Gloss/ Matt) as per the instructions of the Engineer In

Charge. (base rate Rs. 1450/- sqm)

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to

macth the specifications same as gypsum ceiling.

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to

4.8 MR macth the specifications same as gypsum ceiling. RMT 45.00 524.63 23,608.35

MR Providing the wooden cove of 150mm x 150mm having a facia of 75mm 10.00

to macth the specifications same as above

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral

fibre/ gypsum ceiling. In order to make the Mineral Fiber/ gypsum ceiling higher

4.1 than the Gypsum Ceiling by upto 100mm as per drawings. (visible surface of gypsum 35.00 296.09

band to not exceed 100mm) including plastic emulsion paint.

Providing and supplying of Armstrong GI Open Cell 600 x 600 x 100 mm thickness

4.1 MR and installation as per the instructions laid down by the manufacturer. SQM 25.00 2,500.00 62,500.00

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100

mm Height) U Shape panels in wooden finish. Panels shall be made of 0.5 mm thick

galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high

corrosion resistance and good color stability. Centre to Centre panel gap will be 100

mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80

4.1 MR mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm SQM 5.00 9,171.68 45,858.40

at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia.

galvanized steel wire rod hanger with special height adjustment suspension clip at max.

1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon

inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site

dimensions or shop drawings. Top cap and side cap are used to cover the edges of the

SUB TOTAL OF CEILING 2,57,838.75 8,74,227.94

5 DOORS/ WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold fast

lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood CUM 0.25 1,31,576.95 32,894.50

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board construction with frame of

5.2 9.21 1st class hard wood and well matched commercial 3 ply veneering with vertical

grains or cross bands and face

veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Extra for Providing and fixing flush doors with decorative veneering instead of non

5.3 9.22 decorative ISI marked flush door shutters conforming to IS: 2202

9.22.1 On one side only SQM 2.00 408.05 816.10

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum

5.4 9.23 depth on all edges of flush door shutters (over all area of door shutter to be measured) SQM 3.00 401.40 1,204.20

Providing and fixing wooden moulded beading to door and window frames with

5.5 9.40 iron screws, plugs and priming coat on unexposed surface etc.

9.40.1 2nd class teak wood

Digitally signed by

CHANDRESH KUMAR

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the

5.7 9.84 body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), EACH 1.00 856.30 856.30

with double speed adjustment with necessary accessories and screws etc. complete.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked,

5.80 9.97 anodised (anodic AC 10 as per IS : 1868 ), transparent or dyed to required colour or

shade, complete:

5.90 9.82 DOOR STOPPER:- Providing and fixing bright finished brass hanging type

floor door stopper with necessary screws, etc. complete.

Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & spring type fixing arrangement and making necessary holes etc. for fixing

required door fittings, all mplete as per direction of Engineer- incharge.

Supply & Installation of Single leaf anodized aluminium profile door frame of section 45-

50 mm x 20-25mm with a set of Pivot hinges with FS nut at top & bottom & Single Leaf

Glazed shutter of 10mm thick Toughened glass & Hard wares like H type pull handle

5.11 MR handle 25mmx450mm , Half moon door stopper , bottom corner lock & Floor machine Nos 12.00 57,500.00 6,90,000.00

for self closing complete with required accessories.As the door is frameless, the edges

will be visible Size Considered 900 x 2400mm.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH

123 with Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset,

20 SS forend, SS strike plate and EP Cylinder for all

SUB TOTAL OF DOORS 57,373.25 7,30,980.38

6 FINISHES & MISCELLANEOUS

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing

6.1 10.25 in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 120.00 142.30 17,076.00

6.2 13.61 Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade:

13.61.1 Two or more coats on new work

PRIMER: Applying one coat of water thinnable cement primer of approved brand and

6 13.43.1 manufacture on wall surface. Water thinnable cement primer. SQM 400.00 64.45 25,780.00

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

6.4 21.1.1 For Fixed Portion

6.5 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 200.00 466.30 93,260.00

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and kg

making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

21.3 directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

6.6 21.3.2 With float glass panes of5mm thickness 100.00 sqm 1325.55 1,32,555.00

Digitally signed by

CHANDRESH KUMAR

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing

6.7 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.

21.8.1 Upto 5mm Depth and 5mm width 150.00 metre 85.25 12,787.50

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved

quality with necessary stainless steel screws etc. to the side hung windows as per direction of

charge complete.

21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm

with SS screws etc .complete as per direction of Engineer-in-Charge.

21.12.2 Powder coated minimum thickness 50 micron aluminium each

tubular handle bar

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top

tube of 38mm diameter, powder coated bottom bar, with suitable roller clutch

mechanism and plastic ball chain. The Roller Blind fabric should possess the below

mentioned specifications with fabric made up of 85% Polyester and 15% Catonic

Polyester. Roller blinds with Solar protection fabric of high

tenacity Polyester Yarn & Fungi static Treatment and should block the light flux & offer

elimination of glare and sunlight / heat radiance. Fabric shall have visible light & solar

properties. 1st weave of thickness 0.32mm ±5% (ISO 2286-2) and weighing

210g/sm±5%. Flame Retardancy as per AS301.3- 1999. Fabric Protected by teflon

fabric protector for water and stain resitance. Harmful substance standard Oeko-

tex standard 100. Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill).

Aluminium profile should have temper WP consisting of alloy 63400 along with

anodizing of 10 micron and powder coating of 60 micron. The tensile strenghth of

profile should be 9.10 Kg/mm square and elongation 18.The control clutch drive unit

engineered heavy duty chain drive pulley operating system consisting of gear

clutch housing and locking plug containing minimum 6 ribs and inserted at minimum

of 38mm into roller tube. It is self-lubricating Exclusive clutch with safety pins for secure

bracket installation and unlocking pin for quick manual removal. Universal clutch is most

convenient for large windows down to the smallest windows. It shall be driven by a ball

chain pulley with ball chain and can be positioned at Right hand or Left hand side of the

shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds..

Mounting hardware brackets universal brackets including end plug bracket with lock

down retainer device. Brackets finish of powder coated metal installation brackets made

of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded

from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from

alloy 63400 and temper WP. Ball chain shall be

2mm diameter cord with plastic balls moulded to form an endless ball

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with

6.1 M.R. 15 yrs MCS warranty as approval of the Architect. (Only film SQM 80.00 1,694.59 1,35,567.20

surface area shall be measured and paid).

Supply and installation of Perforated Window Graphic Film , 4-mil, opaque, cast vinyl

film with a high gloss finish allowing the full graphic image to be seen on one side and

still allowing viewing through the window from the other side with Continuous, non-

perforated liner, White on the outside facing image side, black on the see-through

reverse side. The Film shall be self adhesive with Pressure-sensitive adhesive which shall

be Removable with heat. The film shall be installed with approved artwork

6.1 M.R. digitally reproduced with water-based inks certified to have no hazardous air SQM 35.00 5,525.03 1,93,376.05

pollutants. Self-adhesive, bubble-free installation to be done on a smooth, dust free

putty surface that has a coat of oil-based primer, by Authorized Installers only. The film

shall be tested against ASTM E84 reports: 8170 for flamability standards. Certificate of

image license and Interior E- Warranty for a period of 36 months. The work shall be

carried out as per guidance and instructions received from Engineer/Architect incharge.

Reception Table:-Providing & Installation of Reception table of of size upto 3.0m x

0.75m x 0.75m/ 1.2m (ht), made out of 19mm thk. Commercial Board finished in

6.1 M.R. wooden polish of approved shade and colors complete as per design. One (1) Nos. 1.00 50,000.00 50,000.00

number Drawer pedestal with 3 lockable drawers and channels (all hardware from

Hettich) to be provided under the table

LACQUERED GLASS Providing and fixing of 6mm thick lacquered glass of approved

color by Architect , fixed with compatible neutral core silicon / double sided tape on

existing partition/panelling. The work shall be carried by applicator authorised by

glass manufacturer only.

Digitally signed by

CHANDRESH KUMAR

Providing & fixing 12mm Thick. 100% Acrylic solid surface of approved make and

colour using approved Adhesive to 12 mm thk. Waterproof Plywood of approved

brand as per shape, pattern & details given in the drawing. The rate includes providing

& fixing beading, cutting, scaffolding, nails, all materials, labour, lead, lifts, HOM etc.,

complete.-for Lift Cladding. (The make, Shade, pattern etc., to be approved NBCC).

STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board finished

using 4mm thick veneer nd polished in melamine to match the veneer cladding item. The

venner to be same as the venner cladding under separate sub- head above complete

6.1 with all hinges, drawer glides and hardware from Hettich or equivalent. All internal 15.00 8,653.47

surfaces to be completed using balancing laminate. Including brass D-type handles for

shutters and recessed type handles for drawers. Storage to be of all heights as per

design. Storage shutters to be made in solid veneer/ glass as per design and drawings.

ACRYLIC EMULSION PAINT: Painting of wall, ceiling, POP/ plastered, Gyspum etc.

surfaces with smooth and even finish velvet touch paint of approved brand and

6.1 MR manufacture to give an even shade. Two or more coats on new work complete to the SQM 300.00 234.79 70,437.00

satisfaction of the Engineer- in -charge

complete with the preparation of the base etc.

Providing & fixing imported decorative Poly décor fabric Wall Paper (on walls and

ceiling) of weight 475 g /sqm as per approved shade & design including prepration of

surface with 2 coats of Nubin Glue based

HONEYCOMB BLINDS -WINDOW BLINDS:- Providing & Fixing premium quality Motor

operated Roller blinds with Prestressed Micro-Aerated Solar protection fabric of high

tenacity Polyester Yarn with PVC Coating& Fungistatic Treatment and should block the

light flux & offer elimination of glare and sunlight.Fabric for the Blinds : Composition:

40% Polyester / 60% PVC, Weight:400 g/m2 (+/-5%), Thickness:0.45 mm (+/-5%),

6.1 M.R. Fabric Openess Factor: 4% , Tensile Strength (Warp/Weft): 220/220 daN / 5cm, Tearing SQM 20.00 4,221.61 84,432.20

Strength (Warp/Weft): 30/25 daN, Fire Retardancy:M2 (NFP92-507)-width of the single

blind is in the range of 1.8m to 2.0m The roller mechanism operate with Control unit is

made of high strength reinforced plastic. The clutch is of wrap spring design. High

carbon steel springs are provided to transmit motion from driving to driven members of

clutch mechanism..

Providing and Fixing Motor for operated Roller blinds with Prestressed Micro-

Aerated Solar protection fabric of high tenacity Polyester Yarn Along with its

Remote and all fitting required complete as per satisfaction of engineer-in-charge.

NS providing and fixing Brass lettering name plate with appropiate size over Backplate as approved by the Nos 11 1,850.72 20,357.92

engineer in charge

NS Providing ceramic planter pots of minimum size of 400mm height with desired plants as approved by Nos 25 3,701.45 92,536.25

the Engineer In charge.

6.1 NS SS Door Handle 600mm height, for glass doors Nos 2 4,500.00 9,000.00

NS Toilet Cubicles made of 18mm thick compact laminate HPL Boards complete with Nos 3 23,000.00 69,000.00

doors and SS accessories of MARINO make

NS Providing and fixing Curved shaped urinal partition with frosted glass Nos 3 4,500.00 13,500.00

NS Providing and fixing wall hung mirror for bathroom with size 30inch by 20inch Nos 2 3,500.00 7,000.00

6.1 4mm thickness with all necessary fittings and fixtures included. Saint gobain make

SUB TOTAL OF FINISHES 3,57,011.00 14,39,596.12

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

Sno. Specifications

Item Rate Amount Reference Image

Providingin place of main table with overall size of table of 1830 x 750

x 750mm. The main table shall be of size 1830 x 750 x 750mm. The

side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm

thick MDF – one side pre-laminate board confirming to IS-14587:1998

with 0.4 mm PVC membrane pressed on to top. Soft closing access flap

within-build power box are provided on work surface for wire

management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top. The modesty panel is made of 25 mm

thick MDF one side pre-laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top. The understructure is

DGM made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping.

The pedestal is made of 25 mm thick Pre-laminated twin board of E1-

P2 grade and approved shade edge banded with matching 2 mm thick

PVC lipping. Drawer fronts made of 25 mm thickf profile should be 9.10

Kg/mm square and elongation 18.The control clutch drive unit

engineered heavy duty chain drive pulley operating system

consisting of gear clutch housing and locking plug containing minimum

6 ribs and inserted at minimum of 38mm into roller tube. It is self-

lubricating Exclusive clutch with safety pins for secure bracket ins

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be

made of 25mm thick MDF – one side pre-laminate board confirming to

IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The

Slide door unit is made of 25 mm thick Pre- laminated twin board of E1-

Back Unit P2 grade and approved shade edge banded with matching 2 mm thick

PVC lipping. Shutters have a soft closing & anti slam mechanism.

Handles are provided for ease of opening. Storage is provided with lock

Digitally signed by

CHANDRESH KUMAR

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The

back is made up of injection moulded glass filled nylon & upholstered

using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D).

The HR polyurathene foam is moulded with density =45+/-2 kg/m

cube and hardness 16± 2 kgf as per is:7888 for 25%

compression. The armrest has an up=Down adjustment of 8.0 ±

0.5cm which is provided in armrest structure. Armrest structure is

chrome plated and fitted with an armrest top. It shall have Front pivot

synchro mechanism with following features. 360 degree revolving type,

Single point control, front fivot tilt, tilt tension adjustment, 4 position

locking with anti- shock feature, seat/back tilting ration of 1:2. The

lumber support consists of polypropylene pad with mouled

Main polyurathene foam & covered with polyester fabric. The height of

Chair lumber pad can be adjusted through two projecting knobs provided on

the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5

cm in height. The pneumatic height adjustment has an adjustment

stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet

chrome plated and assembled with injection moulded moulded black

polypropylene hub cap. the work shall be carried out as per guidance

and instructions recieved from Engineer Incharge. This shall come

along a headrest assembly consisting of polypropylene pad with lumbr

support and covered with polyester fabric. Neckrest assembly has an

adjustment stroke of 4.2cm and rotation adjustment stroke of 76

Digitally signed by

CHANDRESH KUMAR

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The

back is made up of injection moulded glass filled nylon & upholstered

using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D).

The HR polyurathene foam is moulded with density =45+/-2 kg/m

cube and hardness 16± 2 kgf as per is:7888 for 25%

compression. The armrest has an up=Down adjustment of 8.0 ±

0.5cm which is provided in armrest structure. Armrest structure is

chrome plated and fitted with an armrest top. It shall have Front pivot

synchro mechanism with following features. 360 degree revolving type,

Single point control, front fivot tilt, tilt tension adjustment, 4 position

Visitor locking with anti- shock feature, seat/back tilting ration of 1:2. The

Chair lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of

lumber pad can be adjusted through two projecting knobs provided on

the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5

cm in height. The pneumatic height adjustment has an adjustment

stroke of 10cm. The pedestal is fabricated from 0.2cm thick HR sheet

chrome plated and assembled with injection moulded moulded black

polypropylene hub cap. the work shall be carried out as per guidance

and instructions recieved from Engineer Incharge.

Supplying and Placing in place of 2 seater sofa. The overall dimensions

of the sofa shall be 1460W x 905D x 855H. The seat should be made

of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top

layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be

upholstered with fabric or leatherette. 2) BACK FOAM: The back should

be made of PU foam with Density 28 ± 2 kg/cu. mtr with two

additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette. Understructure should be made

sofa 2S up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross

section deviod of major knots and surface defects 6 nos. per seat and

3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless

steel (grade SS 202) tube & plate with plastic endcap.

Digitally signed by

CHANDRESH KUMAR

Supplying and Placing in place of 1 seater sofa. The overall dimensions

of the sofa shall be 1460W x 905D x 855H. The seat should be made

of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top

layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be

upholstered with fabric or leatherette. 2) BACK FOAM: The back should

be made of PU foam with Density 28 ± 2 kg/cu. mtr with two

additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette. Understructure should be made

up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be

resistance and termite proof as per IS:303.) and pinewood of cross

section deviod of major knots and surface defects 6 nos. per seat and

3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless

steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV

glued with bushes made in SS 202 grade for fixing with

Center understructure. It shall be a welded assembly made in SS202 grade

Table having dia. 12+/-0.04 as per IS:1762. overall dimensions of table

shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV

glued with bushes made in SS 202 grade for fixing with

understructure. It shall be a welded assembly made in SS202 grade

ST having dia. 12+/-0.04 as per IS:1762. overall dimensions of table

shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Digitally signed by

CHANDRESH KUMAR

Providing and placing panel & tile based modular workstation,

with partition thickness as 52.4 mm thk and ht - 1200 including

powder coated aluminium trims. Tiles: Combination of top tiles

are fabric magnetic/fabric/fabric tackable/white board/glass writing

board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles -

Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel

thickness comprises of 38mm (35 mm Minimum) thick paper

+ 3mm MDF on each sides + 0.6mm decorative laminate or fabric on

both sides. The uprights and horizontals shall be made of aluminium

extrusion having average wall thickness of 1.2 mm & powder

coated with epoxy- polyester powder. Particle board framing is used

workstati on outer boundary of these blocks as well as intermediately at

on L certain locations forming conduit for passing cables. These blocks

shape are located in the mid segment of the panels and can be provided

1500 x with cutouts for mounting switch boxes (above or below the worktops).

1500 Top tiles can be offered in variety of combinations. The fins along the

depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam

particle board with flat pvc lipping edge banding of size 1500mm W1 x

1500mm W2 x 750D x 750H. Brackets shall be made from 2mm

thick CRCA steel. Pedestals with legs - Nova pedestal flat metal

front, free standing central locking of size 390 mm w x 435 mm d x

646 mm height 3dr

= 2box+1file. The work shall be carried out as per the

instructions and guidance received from engineer incharge.

Digitally signed by

CHANDRESH KUMAR

The cushioned seat and back assembly consists of seat base moulded

in glass filled Poly-amide, moulded polyurethane foam and

upholstered with high stretch knitted polyester fabric. The back

size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per

m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional

movement possibility just with a simple lean on the sides or back,

without need for complex manual adjusments. The cantilevered seat

offers impact cushioning while seating and synchronises with the

back movement during posture changes. The ‘S: shaped spines

moulded in high strength glass filled Polyamide and the spine

connector moulded in glass filled Polyamide form the back spine

structure involved in multi dimensional recline motion. The variable tilt

angle recline motion can be adjusted with 3 position Tilt limiter feature

which is inbuilt in saet base and the tension is user weight dependent.

The adjustable armrests assembly consists of armrest housing

sliding over the armrest structure, both moulded in glass filled

Polyamide. The pneumatic height adjustment shall have a stroke of

9.2cm.The pedestal is injection moulded in glass filled Polyamide and

fitted with 5 nos. twin wheel castors. The pedestal is 66cm

pitch centre diameter and 76cm with castors. The overall

11 dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The Each 14 12,000.00 1,68,000.00

The height size

be 2025(H) x 450(W) x 500(D). The add on units

are stacked width wise to form a row of storage having common side

panel. The legs shall be of 45mm height and fitted with screw type

leveler.The material shall be a combination of CRDA 0.5mm and

0.8mm thickness. Each full shelf shall have a load capacity of max. 40

Kg UDL . The coating shall be of Epoxy Polyester Powder of 50

full ht microns(± 10 microns) thickness. The wooden door shall be of size

storage 448(W) x 18(T) x 1978 (H). It shall be a 3 way locking door made of

MDF and Honeycomb covered with decorative and backing laminate.

the locking shall self closing hinges. the handle shall be made of

Mazak. 2mm thick lipping is done on all edges. It shall have Self

Grand Total 31,00,057.74

Grand Total 31,00,057.74

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New

Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

ITEM DISCRIPTION DSR MR

S.NO. SUB HEAD

1 MAIN PANEL & DISTRIBUTION BOARD 1,24,683.76

4 LIGHTING FIXTURES 4,602.00 4,51,079.47

5 WIRING FOR DATA AND VOICE OUTLETS 2,97,460.00 3,78,000.66

6 CABLE TRAY.& RACE WAY. 3,73,800.00 7,14,881.15

7 UPS & INVERTER SYSTEM 3,00,000.00

8 EPABX SYSTEM 7,17,307.50

9 ACCESS CONTROL SYSTEM 3,81,248.00

10 FIRE ALARM & PA SYSTEM 7,08,644.00 -

GRAND TOTAL 59,52,026.79

GRAND TOTAL 59,52,026.79

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of

DSR-2022 Description

S.No Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

1.2 DISTRIBUTION BOARDS.

Supply , installation ,testing and commissioning of 'MCB double door Distribution Boards dust and

vermin 'proof protected and AC supply operation including incoming MCB/ELCB/RCBO/MCCB as per

specifications and required capacity Neutral bar and Earth Terminal complete as required and installed

in concealed in wall after necessary chase cutting with finishing /surface on wall including all fixing

materials required.

12Way VTPN MCB DB with 80A 4P MCCB(36KA) as incoming and 36 nos (6-32A)SP MCB as outgoing.(For

12Way VTPN MCB DB(Vertical type) with 63A 4P RCCB as incoming and 36 nos (6-32A-10KA

b )SP MCB as outgoing.(For LPDB) EACH 2.00 31,170.94 62,341.88

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-32A-10KA )SP MCB as

c outgoing.(ACDB) EACH 1.00 31,170.94 31,170.94

Total of Main Panel/ DB 1,24,683.76 -

3.0 CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector / circular

shaped aluminium / copper conductor PVC insulated cores under ground PVC tape wrapped inner

sheathed, GI strip / wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on

wall or ceiling using GI clamps and spacers as per route shown at site and further as directed by

Engineer-in charge

a 185 Sq.mm 3 1/2 core Aluminium cable mtr. 25.00 1,741.42 43,535.50

b 35 Sq.mm 3 1/2 core Aluminium cable mtr. 75.00 434.66 32,599.50

c 1 6Sq.mm 4 core copper cable mtr. 75.00 308.01 23,100.75

d 25Sq.mm 4 core copper cable mtr. 100.00 396.60 39,660.00

e 4 Sq.mm 3 core Copper cable (For AC Units) mtr. 250.00 473.43 1,18,357.50

Supply & fixing of end termination for above mentioned cables including compressed type

3.1 brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with earthing of

glands in following sizes

Total of Cables / Mains 2,72,696.25 4,008.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade 1.5

sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in & including 25 mm dia ,

MS conduit surface/ concealed in wall / ceiling conferming to IS 732 including all accessries such as

4.1 1.3 junction boxes , conduit bends, elbows and ceiling rose , and anodised GI switch box with modular

switch ,modular plate and the box covered with

Digitally signed by

CHANDRESH KUMAR

a Group C 1,845.00

b Secondary light point controlled by same switch 1,094.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

a 2x1.5sqmm+1x1.5sqmmearth wire 327.00

b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 369.00

c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 428.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V grade 1.5

sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in & including 25 mm dia ,

1.3 MS conduit surface/ concealed in wall / ceiling conferming to IS 732 including all accessries such as

junction boxes , conduit bends, elbows and ceiling rose , and anodised GI switch box with modular

switch ,modular plate and the box covered with

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated copper

conductor cable drawn through 25 dia MS conduit laid in surface/concealed over false ceiling or in

4.4 1.4 slab/wall chases including ,2way modular switches,modular plate ,suitable GI box and earthing the point Per Pts 4.00 1,981.00 7,924.00

with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 25.00 122.00 3,050.00

d 1.24.5 6 pin 15/16 A socket outlet Each 15.00 197.00 2,955.00

4.6 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

1.27 for modular switches in recess etc. as required.

4.7 Supplying and fixing following Modular base & cover plate on existing modular metal boxes

1.28 etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ Meter 200.00 47.00 9,400.00

recessed steel/ PVC conduit as required.

4.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 100.00 275.06 27,506.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

4.10 1.20 including painting in case of surface conduit,or cutting the wall and making good the same in case of

recessed conduit as required

Digitally signed by

CHANDRESH KUMAR

Supply and fixing of 3 nos. 6A socket with 6M modular GI box, base plate and cover plate below

worktop, along with 1no. 6A socket, 1 no. 6A switch and 1 no. 16A switch(for 3 nos. sockets) in 4M

4.11 MR modular GI box, base plate and cover plate above worktop complete as per Set 40.00 1,700.00 68,000.00

drawings and instructions of engineer in charge.

Total of Wiring 95,506.00 9,13,609.00

5 LIGHTING FIXTURES

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600 lumen.

The product should be SMD based and have non integral isolated driver with 2KV inbuilt surge

protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour at L70 B50

5.1 MR parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand Nos. 15.00 3,400.00 51,000.00

wires and external wire should have PVC coated multistrand wires.

Supplying, installation with hanging support, testing and commissioning of light fixtures with electronic

Ballasts, Tubes, lamps, all fixing materials including connecting wires etc. all complete as per the

directions of Engineer-in-charge (All LED Light Fixtures should be covered with minimum 3 Years onsite

5.2 MR replacement warranty). Nos. 70.00 3,100.00 2,17,000.00

FULL GLOW 2 X 2 LED 33/ 36 W slim Smart Panel of make As specified in tender document.

Supplying, installation with hanging support, testing and commissioning of light fixtures with electronic

Ballasts, Tubes, lamps, all fixing materials including connecting wires etc. all complete as per the

directions of Engineer-in-charge (All LED Light Fixtures should be covered with minimum 3 Years onsite

5.3 MR replacement warranty). Nos. 120.00 1,400.00 1,68,000.00

15/18 W LED commercial type down lighter of make As specified in tender document.

Supplying,installation,testing an d commissioning of Passive Infrared(PIR) technology based occupancy

sensor having high preformance, non regulating programmable type, suitable for connected load upto

5.6 15.1 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary EACH 1.00 4,602.00 4,602.00

fixing arrangements i/c programming at site etc.

complete as required.

5.7 Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

MR connectors etc., as per the direction of the engineer In charge each 3.00 4,026.49 12,079.47

Supplying, installation with hanging support, testing and commissioning of light fixtures with LED Tubes,

LED lamps, all fixing materials including connecting wires etc. all complete as per the directions of

Engineer-in-charge (All LED Light Fixtures should be covered with minimum 3 Years onsite replacement

LED 18/20 watt Tube Light with all accessories.

Total of Light Fixture 4,51,079.47 4,602.00

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part- III) complete

with accessories such as bends, junction boxes, pull boxes etc., in recess or on surface including cutting

6.1 chases in the walls/floors and making good the same complete as

6.2 Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4 pair LAN Cable in the existing

MR surface/ recessed Steel/ PVC conduit as required.

Digitally signed by

CHANDRESH KUMAR

6.3 Supply & fixing of Plug in type information outlet (campatible with data cables) in existing

MR faceplate/ GI Box in wall/furniture/floor complete as required. Nos. 50.00 582.51 29,125.50

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

6.4 1.24 connections but excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet Each 20.00 148.00 2,960.00

6.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port square plate having spring shuttered front

access for preventing ingress of dust, dimension as per commercially available modular office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for voice) or as required square

plate having spring shuttered front access for preventing ingress of dust, dimension as per commercially

available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm annealed copper

conductor PVC insulated and PVC sheathed armoured telephone cables generally conforming to ITD S/WS-11-

6.6 MR C and IS 1554 part I direct in ground /surface and / or in existing pipe as required and includig making mtr. 100.00 457.57 45,757.00

terminal joints, complete as required.

Supplying, installing, testing and commissioning of 24 port Cat 6A patch panels available with block of four

equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded CAT6A U/UTP 24 port LCS2 rack

6.7 MR mountable to be compatible in 4nos of 6 X RJ 45 Tool EACH 4.00 16,491.19 65,964.76

less connector U/UTP unit in a block.

Supplying, installing, testing and commissioning of Cabinet. Size 2026 X 800 X 800 mm (HXWXD)

following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 150, CRCA 'D' Grade thickness

(mm) 1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass Door,Injected one piece polyurethane

gasket on frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU

6.8 MR 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel EACH 1.00 75,000.00 75,000.00

100mm wide 42U-

2 Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips

150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without Brake) - 2

Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP foam. In the rack there must be

maintained 1 U = 1.75 inches space. Nos. 1 etc complete as required

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800 mm) (WXD) following

accessories, Width (mm) 800, Depth (mm) 800, Approx.Net Wt (kg) 75, CRCA 'D' Grade thickness (mm)

1.2, RAL 9017(Matt Black), Glass: 4mm Toughened Tinted Glass Door,Injected one piece polyurethane

gasket on frame, Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4 Nos,PDU

230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB 16A/32A -0/1 Pc), cable channel

100mm wide 24U- 2 Nos,Heavy Duty Stationary shelf M6 screws,washer,cage nuts (nickel coated))3 Nos.

Earthling Strips 150mm H - 1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels

(without Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP foam. In the

rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc complete as required

Total of Data & Voice carried over to summary 3,78,000.66 2,97,460.00

8 CABLE TRAY.& RACE WAY.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated out of 10

mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with providing of Anchor

fastners and all necessary hardwares as required for fixing, including cutting, bending, welding, drilling,

bolting etc. as per design as required and painted with one coat of primer and two coats of enamel paint

of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of following

sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required for fixing and including

the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth strips complete as per

specifications, as required and as below.

Digitally signed by

CHANDRESH KUMAR

Total of Cable Tray 3,73,800.00

8.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with internal

partition/compartmentized of the following sizes including providing removable 3 mm thick GI cover,

MR knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete as required

including floor supports, bends, access boxes, tap off boxes and cross over as per specification and site

requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick)

a) 300 mm wide x 38 mm deep raceway RM 50.00 2,100.00 1,05,000.00

b) 225 mm wide x 38 mm deep raceway RM 100.00 1,900.00 1,90,000.00

c) 150 mm wide x 38 mm deep raceway RM 100.00 1,500.00 1,50,000.00

d) 100 mm wide x 38 mm deep raceway RM 100.00 1,100.00 1,10,000.00

8.3 Providing and fixing 400 x 400 x 60 mm deep 2 mm thick GI sheet junction box including 5,315.91

MR providing 3 mm thick stainless steel cover as per specification. Nos. 10.00 53,159.10

8.4 Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including 3,990.62

MR providing 3 mm thick stainless steel cover as per specification. Nos. 15.00 59,859.30

8.5 Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including 1,874.51

MR providing 3 mm thick stainless steel cover as per specification. Nos. 25.00 46,862.75

Total of Raceway 7,14,881.15

Total of Cable Tray & Raceway 7,14,881.15 3,73,800.00

– 10 kVA UPS with 15 minute backup

Supply, unloading, shifting, installation, testing & commissioning of micro processor controlled 10 kVA

transformerless UPS , IGBT based rectifier to achieve input THDI < 5% and input power factor of greater than

0.99 at 100% loading. True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT

, 3 Phase input and 3 phase 415 V output UPS system; and comprising of the following complete as

required and as per specification:

- Fully rated Rectifier cum charger unit and 100% rated Invertor unit Integrated in UPS module.

Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static bypass

- line integrated in UPS module.

- Web-enabled Monitoring and Management through SNMP protocols for

multi-OS environments with below features.

- Giving notifications like e-mail, paging notification, broadcast notification, battery replacement notification,

- run event-based

Event scripts.

logging, data logging and action logging (with date, time,

description of fault and event).

- Fully rated Inbuilt Maintenance Bypass Switch for the continuos operation of the load during maintanance.

- Local notification through audible alarm.

- Fully rated Battery Circuit Breaker with under voltage coil & deep discharge protection to the batteries.

Battery Banks comprising of Valve Regulated Lead Acid Sealed Maintenance Free batteries of

minimum 5years design life to provide 15 minutes backup at 50kVA ,0.9PF and ECV=1.7V with each UPS. The

batteries shall be installed on shelves of rack for quick replacement and servicing. The temperature sensor

shall be provided in the battery section for temperature compensated charging. The bank of batteries

shall comprise of required numbers of batteries connected in series.

Vendor to provide complete details of make of Batteries, ampere hour ratings, no. of Batteries, Expected life,

Final discharge voltage, Nominal float voltage, Battery recharge time & configuration of back up

time, Battery sizing Calculations

Digitally signed by

CHANDRESH KUMAR

Supply, unloading, installation, testing & commissioning of open type MS racks including top fully cover to

protect from falling object to house SMF batteries for 60 kVA UPS system along with suitable interconnecting

links, moulded case circuit breaker having Ithermal, Imagnetic & automatic U/V trip mechanics for Battery

Banks etc. complete as required & as per

specifications.

Supply, laying, testing & commissioning of flexible single core copper cable

for interconnections between UPS to UPS, UPS to batteries, complete as required for 50 kVA UPS.

TOTAL OF UPS & INVERTER SYSTEM CARRIED OVER TO SUMMARY Rs. 3,00,000.00

10 EPABX SYTEM

10.1 IP PBX system with 2 PRI, 100 Analog extensions, 25 digital extensions with

with Operator Console MDF for all lines Nos 1.00 2,50,000.00 2,50,000.00

10.2 Digital Phones-6 Key & 12 Keys Nos 18.00 21,750.00 3,91,500.00

10.3 Operator Console 1.00 32,670.00 32,670.00

10.4 Analog Phones-Push Button Nos 25.00 1,417.50 35,437.50

10.5 Patch Cords From PBX to MDF RMT 25.00 80.00 2,000.00

10.6 50 pair rack mountable MDF Nos 1.00 5,700.00 5,700.00

Total for EPABX System 7,17,307.50

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

2022. Description Unit Qty Rate MR RATE MR AMMOUNT

11 IP BASED CCTV SYSTEM

Supply and fixing of following sizes of MS conduit along with accessories in surface

11.1 1.20 /recess including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm wide angle fixed lens IR Dome

Camera 1/3" Progressive Scan CMOS; H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux

@(F1.2, AGC ON), 0 lux with IR; 25fps/30fps(2560×1440, 1920×1080); 3 VCA functions; 3 streams; 3D

DNR; ICR; EXIR 2.0, up to 30m; DC12V&PoE; Built-in micro SD/SDHC/SDXC slot.

Supply, installation testing and commissioning of Network Video recorder Linux based to manage

and control all the cameras from control room. Software shall support maximum 32 channel with

joystick controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 4 SATA Interfaces, alarm I/O:

16/4, 1.5U case,19" with 4x6TB i.e. 24TB HDD inside

Supply, installation testing and commissioning of Network Video recorder 16-Ch, 8

11.4 MR SATA interface, 2U, H.265 & 4K, Dual Network interface, RAID 0,1,5,6,10,16 X 1080P, 8X 4MP, 4X 4K, 320 Nos. 1 31,273.00 31,273.00

MBPS.with 4x6TB i.e. 24TB HDD inside

Supply, installation, testing and commissioning of Video Management software enabling security related

personnel to easily and remotely gather video evidence, monitor live situations, and configure and maintain a

video surveillance system over Ethernet consisting of digital video recorders (DVRs), hybrid digital video

11.5 MR recorders, network video recorders (NVRs), analogue video cameras, and IP video cameras should support Nos. 1 24,996.00 24,996.00

Detachable Viewers –users have the ability to detach Viewer panels and move them to other (or the same)

monitor(s). A maximum of two (2) Viewers can be detached for a total of 75-up video tiles [two (2)

detached and one (1) core Viewer.

Supply Installation Testing & Commissioning of 21 inch Full HD LED monitor including

wall mount brackets/ clamps/ desk mounting stand.

11.7 MR Supply and fixing of RJ45 Connector Nos. 6 354.00 2,124.00

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face

plate complete as required.

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6, Termination of

Catergory-6 UTP Cable, UL listed, Shall conform to Category-6 as per the EIA/TIA-568C.2, Shall support

network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and strain relief boot

11.9 MR for securing IDC contacts from external forces and for maintaining the bend radius of the cable, Shall have Nos. 6 240.00 1,440.00

minimum durability of 750 mating cycles and 200 termination cycles. Shall be certified by

independent labs like ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall be fixed in existing box

& cover plate in wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having

11.1 MR spring shuttered front access for preventing ingress of dust, dimension as per commercially available Nos. 6 78.00 468.00

modular office furniture.

Supply & Laying in existing conduits/raceway/furniture of 4-pair Unshielded twisted pair cable with a cross

filler (+), meeting Category 6 standards as per TIA-568C.2. The cable shall be tested till 600 MHz or more

from independent laboratories like ETL for 4 connections. Test Certificate from independent labs like ETL shall

Digitally signed by

CHANDRESH KUMAR

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO Jacks (RJ45,

TIA-568C Category-6), having integrated bonding bar or other mechanism for grounding, loaded with

individually replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2. Shall be 6 port

module construction for better cable dressing at the rear. The jacks shall have RJ-45 type connector with

bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the

bend radius of the cable.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be

11.1 MR offered in multiple coloured UTP cable for design flexibility with a clear strain relief boot on each modular Nos. 6 215.00 1,290.00

plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP

Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded twisted pair

stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be

11.1 MR offered in multiple coloured UTP cable for design flexibility with a clear strain relief boot on each modular Nos. 6 107.00 642.00

plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP

Cable, 1 Meter.

Supply Installation Testing & Commissioning of Managed Layer -2 Switch with Power

11.1 MR on Ethernet (PoE) enabled, 24 Port Fast Ethernet Web Smart Switch, including 2 Gigabit BASE-T and 2 Nos 1 12,170.00 12,170.00

Gigabit Combo BASE-T/SFP.

TOTAL OF IP BASED CCTV SYSTEM Rs. 51,200.00 1,63,301.00

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

BOQ FOR ACCESS CONTROL SYSTEM

Sr. No Description Unit Qty Rate Amount

ACCESS CONTROL SYSTEM

Supply, Installation,Testing and commisioning of Contact less Face Recognition and RFID based Access terminal, RFID

Supported (125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire/EV1, FeliCa), Mobile Card (NFC/BLE), 30,000 (1:1

1 User based), 5 Faces/ User Capacity, 5,000,000 Text Logs, 2" TFT Screen, 24 bit Voice DSP with ECO Nos. 2 81,500.00 1,63,000.00

Cancillation, Eternet, RS 485, Weigand Supported, Complete as Required.

Supply, Installation, Testing & Commissioning of 2 Door/ 2 Reader IP Controller accommodates a card database

2 of 55,000 cards, and a transaction buffer of 45,000 transactions,TCP/IP, USB, Serial Interface unit, Relay Switching Nos. 2 48,800.00 97,600.00

3 Supply, Installation, Testing & Commissioning of Proximity Cards. Nos. 30 301.00 9,030.00

Supply, Installation, Testing & Commissioning of Electromagnetic Lock 600 lbs, single leaf, LED Status Display, Nos. 2,534.00

4 includes Door Sensor, i/c making conection, integration, testing etc. complete as required on site 2 5,068.00

Supply, Installation, Testing & Commissioning of Power Supply 12V 2 A for Access Control Reader and Door Lock Unit,

5 Complete in all respect as required at site. Nos. 2 2,950.00 5,900.00

Supply, Installation, Testing & Commissioning of Alagtech U/L Clamp made of aluminium anodised for EM Lock Nos. 1,300.00

6 on the surface of frame/structure etc. i/c alignment etc. for smooth operation of EM lock etc. 2 2,600.00

Supply, Installation, Testing & Commissioning of 24 Port Gigabit Switch, Auto MDI-MDIX for all port,Link Status Nos. 29,500.00

7 Detection, 4.8 Gbps Switching Capacity, Rack Mountable, Complete in all Respect as required at site. 1 29,500.00

Supply, Installation, Testing & Commissioning of Access Control Software for with Advance Access Management

Module & Advance Attandence Mangement Module. It should support Multi company, Multi location, Multi department,

Multi login with different rights, Muti hierarchy of employee.

Total of Access Control System

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency

and Bankruptcy board of India(IBBI)

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 4,04,538.86

B WATER SUPPLY 1,45,788.95

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 3,38,191.30 37,950.00

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

A. BOQ FOR FA & PA SYSTEM DSR MR

Sr. No 2022.No. Description Unit Qty Unit Rate Total amount

Sr. No 2022.No. Description Unit Qty Unit Rate Total amount

Supplying, installation, testing and commissioning of micro processor based intelligent addressable

main fire alarm panel, central processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop

and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD

display with touch screen or other keypad and minimum 4000 events history log in the non volatile

1 17.2.1 memory (EPROM), power supply unit (230

± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic

charger. The panel shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the schedule of work

under SH: PA System) and shall be complete with all accessories . The panel shall be compatible

for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog Pcs 30

2 17.2.4 addressable photothermal detector complete with mounting base complete as required. 2,858.00 85,740.00

Supplying, installation, testing & commissioning of intelligent addressable Pcs 3

3 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete with base as 2,726.00 8,178.00

4 17.2.14 Supplying, installation, testing & commissioning of addressable manual call Pcs 3

point complete as required. 3,871.00 11,613.00

5 17.2.15 Supplying, installation, testing & commissioning of addressable horn cum Pcs 3

strobe complete as required. 3,506.00 10,518.00

6 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete Pcs 3

with base as required. 3,270.00 9,810.00

Supplying, installation, testing & commissioning of response indicator on Pcs 15

7 17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all connections etc as 276.00 4,140.00

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed RM 300

1 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath 173.00 51,900.00

complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 Pcs 1

1 17.3.1 player (including 6 zone button paging station) with seamless integration facility with main fire 1,26,411.00 1,26,411.00

alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms Pcs 1

2 17.3.6 operating at 240 volt AC supply complete as required. 96,779.00 96,779.00

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt Pcs 10

in ABS enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Digitally signed by

CHANDRESH KUMAR

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

1 17.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required..

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 300 54.00 16,200.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and RM 450

accessories like coupler etc. as required.

TOTAL Rs. 7,08,644.00

GRAND TOTAL Rs. 7,08,644.00

GRAND TOTAL Rs. 7,08,644.00

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

SUB HEAD A: SANITARY FIXTURES & FITTINGS BOQ

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing glazed vitreous china single trap syphonic pattern

having back inlet ,supporting chair ,wall hung water closet with

cistern complete with all internal fittings/accessories and CP

brass flush bend (European type) water closet with seat and lid, with

1.1 C.P. brass hinges and rubber buffers, adapter, rubber joints fixed

to W.C., C.P. brass screwed washers including cutting and making

good the walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete in all

Wall hung W.C. pan (White colour)with white plastic seat &

lid "Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing glazed vitreous china wash basin with R.S. or C.I.

brackets painted white, 32mm C.P. brass waste of standard pattern ,

C.P brass wall flange 32 mm dia. C.P. brass bottle trap and union 32

mm dia C.P. pipes to wall flange. complete including cutting and

making good the

NS walls wherever required.

Undercounter wash basin (White colour)of size: 585x430 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.3.2 NS Table top wash basin (white colour)of size: 440x440 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing 15mm C.P. brass single hole wash basin

1.4 mixer without popup waste system with 450mm long copper pipes

NS and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.5 NS Providing & fixing vitreous chinaware urinal comprising

Large flat back wall hung urinal in glazed vitreous China

new magnum urinal

15 mm electrically operated solenoid valve with infra red

sensor mounted in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve to urinal

terminated with a 15 mm screwed spreader

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension pipe rubber

adopter for waste connection, CP brass wall flange.

For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details.

Providing & fixing stainless steel sink R.S. or C.I. brackets

painted, 40mm C.P. waste, C.P. brass chain and rubber plug,

1.6 40mm C.P. cast brass bottle with necessary union complete

including cutting and making good the walls

NS wherever required

Digitally signed by

CHANDRESH KUMAR

Stainless steel sink single bowl with drain board(size

510x1040mm) of approved

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing Sink Mixer with Swinging Casted Spout

1.7 (Wall Mounted Model) with 450mm long Copper Pipes & Brass

NS Nuts.CP brass wall flange

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.8 Providing & fixing toilet paper holding including cutting and

making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing Horizontal liquid soap dispenser with stainless

1.9 steel lid and brackets fixed to wooden cleats with

NS C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.10 Providing & fixing C.P. brass coat hooks fixed on toilet door

with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing beveled edge mirror 5.5mm thick of superior

quality plate glass complete with 6mm thick marine ply sheet

1.11 ground fixed to wooden cleats with CP brass screws and

washerswith 40 mm wide teak wood frame as per design including

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M

NS long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 3 1,730.53 13,844.25

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control electric

1.13 element, pressure release valve, brackets fixed to expansion

fasteners with M.S. nuts and bolts all complete including cutting

and making good the walls

NS wherever required.

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing & fixing wall mounted 25 mm dia Stainless steel coated

1.15 grab bar including cutting & making good the

NS walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

1.16 Providing & fixing 15 mm dia C.P. brass bib cock with Hose

union of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Digitally signed by

CHANDRESH KUMAR

1.17 Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and 'C' size

battery (2 Nos) for operation fixed to wooden cleats

NS with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Providing and fixing of stainless steel finish Paper Towel

1.19 Dispenser having capacity of 300-350 paper towels fixed to wooden

NS cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details.

Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall be

selected by Architect/Interior designer/Project manager and the

same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of

sanitary fixtures.

iii. Contractor to receive all the above mentioned items &

store at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 4,04,538.86

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and Bankruptcy board of India(IBBI)

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing Chlorinate Polyvinyl Chloride

(CPVC) pipes having thermal stability for hot & cold

water supply including all (CPVC) plain & brass

threaded fittings including fixing the pipe with

18.7 clamps at 1.00 m spacing. This including jointing of

pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of

engineer in charge. .

Internal Work - Exposed on Wall

18.7.2 20 mm nominal outer dia pipes. Metre 80.00 325.10 26,008.00

18.7.3 25 mm nominal outer dia pipes. Metre 60.00 408.55 24,513.00

18.7.4 32 mm nominal outer dia pipes. Metre 40.00 500.95 20,038.00

18.7.5 40 mm nominal outer dia pipes. Metre 14.00 674.35 9,440.90

18.7.6 50 mm nominal outer dia pipes. Metre 14.00 927.00 12,978.00

Providing and fixing Chlorinate Polyvinyl Chloride

(CPVC) pipes having thermal stability for hot & cold

water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at

1.00 m spacing. This including jointing of pipes &

18.8 fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the the

same including testing of joints complete as per

direction of engineer in charge.

Concealed work oncluding cutting chases and making

good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 75.00 513.75 38,531.25

18.16 Providing and fixing brass stop cock of

3 approved quality complete.

18.17 Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end):

Digitally signed by

CHANDRESH KUMAR

Providing and fixing C.P. bass angle valve for basin

18.53 mixer and geyser points of approved quality

5 conforming to I.S:8931 a) 15 mm nominal bore.

Providing and fixing unplasticised P.V.C

18.74 connection pipe with PTMT Nuts coller and bush of

6 approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 4.00 431.60

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 1,45,788.95

Providing and fixing cast iron trap of self cleansing

design with cast iron screwed down or hinged

grating with or without vent arm complete,

including cost of cutting and making good the walls and

17.60.1.1 100 mm inlet and 100 mm outlet centrifugally cast Each 6,416.40

(spun) iron S&S as per IS 3989. 4 1,604.10

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 50 1,077.40 53,870.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 50 1,042.20 52,110.00

Providing and fixing single equal plain junction of reqd.

access door, insertion rubber washer 3mm thick,

bolts and nuts complete.

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 10 731.40 7,314.00

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 6 573.80 3,442.80

Digitally signed by

CHANDRESH KUMAR

17.44 Providing and fixing single equal plain junction of reqd.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 10 707.30 7,073.00

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 6 498.90 2,993.40

Providing and fixing bend of required degree with

5 17.38 access door, insertion rubber washer 3mm thick, bolts

and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6 3,585.60

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6 2,720.40

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 10 4,397.50

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 6 1,789.20

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 10 439.75 4,397.50

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 6 271.45 1,628.70

Providing and fixing MS holder bat clamps of approved

design to cast iron (spun) pipe embedded in and

Including cement concrete blocks 10 x10 x10cm of

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting

holes and making good the walls etc.

18.10 Providing and fixing G.I. Pipes complete with G.I.

Fittings and clamps.

including cutting and making good the walls etc.

Digitally signed by

CHANDRESH KUMAR

18.10.4 32 mm nominal bore Metre 50 563.60 28,180.00

18.10.5 40 mm nominal bore Metre 9 725.15 6,526.35

18.10.6 50 mm nominal bore Metre 35 893.20 31,262.00

18.40 Painting G.I. Pipes and fittings with two coats of

11 anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 50 18.40 920.00

18.40.5 40 mm nominal bore Metre 12 20.95 251.40

18.40.6 50 mm nominal bore Metre 35 25.25 883.75

Painting sand cast iron / centrifugally cast iron( spun)

iron soil, waste and vent pipes and fittings with

paint of any colour such as chocolate, grey or buff

etc. over a coat of primer (of approval

quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 125 69.55 8,693.75

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 12 52.90 634.80

Providing and fixing G.I. Inlet fitting of suitable size

with 2 & 3 Nos. G.I.

13 NS Socket 32 & 40 welded G.I. pipe and dipped in

hot bitumen complete in all respect.

100 mm diameter pipe (Hopper ) Each 33 1,150.00 37950.00

17.58 Providing lead caulked joints to sand cast

14 iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

17.36 Providing & filling the joints with spun yarn,cement

slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

17.48 Providing and fixing single unequal plain junction of

17.48.1. Sand cast (spun) iron pipe IS-3989 Each 7,988.00

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 3,38,191.30 37,950.00

Digitally signed by

CHANDRESH KUMAR

Renovation work at 7th Floor of Mayur Bhawan, Connaught Place, New Delhi in office of Insolvency and

Market Capacity

S.No. Rate / NS Description Unit Qty Rate Amount

Supply instatllation Testing Commissiong of Air

cooled DX type cassette unit internal external unit

including remote etc complete in all respect

1.13 NS RECEPTION AREA 1.5 TR Nos. 1 108750 108750

1.14 NS WORKSTATION AREA 1.5 TR Nos. 4 108750 435000

2.15 NS LOBBY & PASSAGE AREA 1.5 TR Nos. 2 108750 217500

Providing and fixing M.S. structural support for

2 condensing External Unit including fatners, staging if 21 6,000.0

NS Nos. 126000

required in all respect.

Supply, installation, testing and commissioning of 4

Core x 2.5 mm2 copper wire in PVC conduit. (PVC

3 NS conduit is including in the items) complete in all respect. Rmtr. 300 300.0 90000

4 NS Providing, fixing and testing insulated liquid and suction

i NS copperLine

Liquid piping. Rmtr. 200 500.0 100000

ii NS Gas Line Rmtr. 200 500.0 100000

5 NS Supply and fixing of 25mm dia PVC drain line Rmtr. 300 200.0 60000

TOTALwith insulation complete in all respect. 2802750

Digitally signed by

CHANDRESH KUMAR