REPAIRS, MAINTENANCE AND POLISHING OF WOODEN FURNITURE UNDER GE (AF) JAMNAGAR No 1

Amount

Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial .

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered of Head Rest.

Both side veneered of Foot Rest

Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back.

Complete frame of first class hard wood (teak wood) for mirror .

Lower wooden box made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood & bright polished brass knob 40mm dia complete.

Removing following old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-236 & 277

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Table centre” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-235 & 274

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Table Computer” and S & F new parts / components of same size, existing pattern and the same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick bottom plywood with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for Key Board made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Removing following old and unserviceable parts / components of “Table 3 x 3 wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Removing following old and unserviceable parts / components of “Chair dining with cushioned ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of one piece of first class hard wood (teak wood).

Bottom stiffener short made of one piece of first class hard wood (teak wood).

Short rail of seat made of one piece of first class hard wood (teak wood).

Long rail of seat made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with rexin.

Removing following old and unserviceable parts / components of “TV Trolley ” and S&F new parts / components of same size, existing pattern with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/04)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Side made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

5 mm thick Glass fixed with suitable hinges and screws.

Castor wheels.

Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-33 & 275, 249.

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Drawer made out of 12 mm plywood.

Shutters out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279)

Front legs made of first class hard wood (Teak wood).

Rear legs made of first class hard wood (Teak wood).

long / short rail of seat made of first class hard wood (Teak wood).

Stiffener of back made of first class hard wood (Teak wood).

Short & long stiffener of bottom made of first class hard wood (Teak wood).

Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-239 & 273)

Top for TABLE DINING 6 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Top for TABLE DINING 8 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “CHAIR WOODEN BOTTOM” and S&F new parts / components of same size, existing pattern and same materialn of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 & 225)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Wooden bottom made out of 6 mm plywood.

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

M & L for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover. (Drg No FD-281. Tapestry cloth approved by GE not less than 340/- per mtrs.

Removing following old and unserviceable parts / components of “CHAIR EASY” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame

Lower wooden box with drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 248 / 246 )

Back of 6 mm thick commercial face plywood.

Side (left or right) made out of 18 mm thick plywood with 1mm laminated sunmica top wood finish duly polished at bottom, with first class hardwood (teak wood) beading.

Top / middle shelf made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (Teak wood).

Rear legs made of first class hard wood (Teak wood).

Front / Rear / Side rail of seat made of first class hard wood (Teak wood).

Stiffener of Back made of first class hard wood (Teak wood).

Short / long stiffener of bottom made of first class hard wood (Teak wood).

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233)

5 mm thick looking mirror.

3 mm thick Veneered plywood.

9 mm thick Back Plywood.

Aluminium Peg.

Removing following old and unserviceable parts / components of “Board Notice” of size 2440 mm x 1220 mm and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-99)

Complete Frame (top, bottom & side) of sectional area 75 mm x 75 mm made of first class hard wood (teak wood).

Green baize cloth, 12 mm thick sofa board including 6 mm thick commercial plywood.

Horizontal stiffener of sectional area 19 mm x 25 mm made of first class hard wood (teak wood).

Vertical stiffener of sectional area 19 mm x 25 mm made of first class hard wood (teak wood).

3 mm thick glass for shutters with 10 mm x 10 mm sectional area first class hard wood (teak wood) beads.

Mild steel key plate.

Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371)

Back made out of 4 mm thick plywood.

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Door made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Drawer made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

100 mm size steel hasp & staple.

knob 40 mm dia

M&L for repairing of Looking Mirror by replacement of 5 mm thick mirror with back plywood 6 mm thick screw & teak wood beading of same size, existing pattern and same material, and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No.CWE (AF) Bhuj SK FD 901/07)

Removing following old and unserviceable parts / components of “Stool dressing” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07) (Sheet 3 of 3)

Legs made out of teak wood

Short rail made out of teak wood

Front / Rear long rail made out of teak wood.

Removing following old and unserviceable parts / components of “Desk Executive (Branded Pattern)” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No.Godrej S-1070, Swadesi Desk-9006)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Removing following old and unserviceable parts / components of “Chair Easy Cushioned Wooden” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD -358)

Seat of 75 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Back rest of 50 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Hard rubber shoe

Repairs to Sofa set 3 Seater by Replacing of seat & back cushion foam 100 mm thick 40 density with fabric tapestry cloth as per sample approved by Engr - in - Charge. (Drg No. HOF-CSM-18, HOF-139,Godrej, Durian & Swadesi)

Removing following old and unserviceable parts / components of “Sofa set 4 Seater” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood.

Front leg made out of teakwood.

Rear leg made out of teakwood.

Batten for seat and back made out of teak wood

Removing following old and unserviceable parts / components of “Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (FD - 281 / 258 / 373)

Arms made out of teak wood.

Front leg made out of teak wood.

Rear leg made out of teak wood.

Batten for seat and back made out of teak wood.

Fixing of dressing mirror on wall with plastic gutty and codmium plated screw complete all as shown in drawing and as directed by engr in charge.all as shown on drawing & as directed by Engineer-in-charge. FD/E6/MAP/16. Note :- (i) This item shall be executed at Domestic area (SMQ & OMQ Accn) at AF Station Jamnagar. (ii). Dressing Mirror will be provided by the user.

Removing following old and unserviceable parts / components of “Bench Workshop” and S&F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (GE (AF) J / FD / 02 / 01D & 145 M)

Top made out of first class hardwood.

Leg made out of teak wood of size 760 X 100 X 100 mm.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of wooned table fixed with screw and duly polishing to match with existing complete as direction by Engr-in-charg.

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :

Book shelf open large (WDF-33)

Bin soiled linen (FD/E6/MAP/09)

Bed plywood (FD 246)

Board Notice (GE (AF) J/FD-19-03)

Chair dining (FD 279)

Chair Dining FD/MAP-II/04

Chair dining long back (FD-357 )

Chair WBB w/o arms (FD-56, 225)

Chair easy (FD-229)

Chair writing (FD 250,280)

Hat stand with mirror (FD-362)

Locker Bed Side Wooden (FD -54 (M)

Peg table (FD 277)

Stool dressing ( FD/MAP-II/07)

Side Board FD 241)

Sofa set 5 seater (FD 281)

Sofa set 4 seater (FD 281)

Table office clerk (Drg No - DB 4120)

Table office officer (Drg No - DB 4120)

Table dining for 6 persons (Drg No - FD 239, 273)

Table dining for 8 persons (Drg No - FD 239, 273)

Table writing (Drg No - FD 249,275

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 )

Teapoy (Drg No - FD-232,278)

Table bed side (Drg No - FD 248,276)

Table 1520 x 860 x 760 (Drg No - FD 139,289)

Table 900 x 600 x 760 with drawer (Drg No - FD 224,284,283)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283)

Table 900 x 900 x 760 w/o drawer (Drg No - FD 291)

Dhangot Brothers

motwani and associate

M/S Super Steel Works