Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹13.7 L+₹35,729.40 (2.67%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹14.0 L+₹66,621.40 (4.98%)Rejected-AOC | L3 | Rejected-AOC Reject | |
| 4 | L4₹14.4 L+₹1.0 L (7.49%)Rejected-AOC | L4 | Rejected-AOC Reject | |
| 5 | L5₹15.2 L+₹1.8 L (13.8%)Rejected-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L5 | Rejected-AOC Reject |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
6 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG NP 75 AT ZONE A AHMEDABAD
2023_MES_580997_1
8308/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹30,000
Yes
24 Mar 2023
14 Feb 2023
8 Mar 2023
14 Feb 2023
6 Mar 2023
21 Feb 2023
14 Feb 2023 - 21 Feb 2023
Amount
Demolition of brick work built in cement mortar of any description complete.
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where complete.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, RCC tank, landing, chajjas and similar suspended work complete.
Dismantling timber scantling 40Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete.
Dismantling of wrought iron work or mild steel work of any description not otherwise provided complete.
Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete.
Dismantling framed trusses span n exc. 10m wide complete.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete.
M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required complete.
M/L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement complete.
M&L for RCC (Nominal mix) type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete.
Supplying & applying Integral waterproofing compound complete.
M&L brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like set in cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams for rough finished surfaces complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.
S&F for factory made 30mm thick flush door shutter solid core construction with block board core and covered with both side decorative face veneer with lipping / frame to match complete .
S&F for Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
M&L for Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete.
S&F in repairs 18mm thick high density PVC foam board solid shutter, prelaminated both side with decorative choice lamination including required beading & fixed with nails / screws to frame works as in cabinets cupboards shutter etc complete.
S&F for 150mm extruded aluminium alloy handles fabricated type anodised complete.
S&F for 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F for 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F for 100 mm long mild steel butt hinges, medium weight cold rolled complete.
S&F in repairs 25mm dia Stainless steel tubular curtain rod with pair of bracket & SS knob 35-40mm dia complete.
S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F for magnetic catcher steel for cupboard complete.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete
S&F for MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete.
S&F for MS Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete .
M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L for Mild steel round bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binder, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; flats fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F for mild steel Gde Fe 410-O or Fe 310-O Chowkhats and frames of door shutters ( any type, size etc.) of angle, Tee or any section with MS plates/ gusset plates, cleats, hold fast etc including fixing by welding, complete.
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and one portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary opening for exhaust fan if reqd and necessary channel frame work with rubber gasket and aluminium beading etc complete.
S&F for 4mm thick coloured textured designer ceiling board of size 595 X 595mm fixing with screws/clips including Tee grid suspension system of size 600mm x 600mm, type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm, main runner shall be 0.3 mm thick of section 24mmX33 mm cross runner 0.3 mm thick of section 24mmx25 mm, wall angle shall be 0.63 mm thick of section 24mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges valley gutters etc fixed with self tapping screws complete.
M&L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed or bedding in cement mortar 1:6. complete.
M&L for machine cut Kota stone slab 18-25mm thick in riser of steps, skirting, dado and pillar laid over 1:4 cement screed and jointed complete.
M&L for 75mm thick cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in subbase for floors complete.
M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in levelling course to maintain slope complete.
M&L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm / 350x 250x 7 mm / 450X 350X 7mm on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 to receive wall tiles complete.
M&L for Non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
M&L for Vitrified Ceramic tiles light shade 10 mm, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete.
M&L for Virified Ceramic tiles 10 mm thick any type of shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10 mm thick in CM 1:4 complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L for Rendering in two layers on other than fair faces of brick work or concrete surfaces 5 mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement over 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete. (WPC measured and paid separately)
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.
M&L for preparation new plastered surfaces of external wall and applying two coats cement base paint over a coat of alkali resistant primer complete.
M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over a coat of 1 to 2mm (1.5mm average) thick wall care putty and one coat of alkali resistant primer complete.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper with 1.5mm average thk wall care putty and priming plastered and other surfaces with alkali resistant priming paint walls complete
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete.
Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as.
S&F 15 mm medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, I connections , caps, plugs and unions etc and fixed complete with clips wall hooks, wooden plug etc fixed to walls acr in floors, ceiling and making good complete.
S&F 20 mm medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, I connections , caps, plugs and unions etc and fixed complete with clips wall hooks, wooden plug etc fixed to walls acr in floors, ceiling and making good complete.
Dismantling water tanks and removing to store exceeding 250 ltrs and n exc 500 ltrs complete.
S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and directed.
S&F in replacement Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe complete.
S&F in repairs gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia complete.
S&F in repairs 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F in repair vitreous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging with PVC (SWR) P trap device complete.
S&F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including connecting to fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank) including provn of lime concrete bedding complete all as.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
S&F in repair soap dish of stainless steel box type fixed with screws & similar to Cat BA-45 of Prayag complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete.
S&F in repair stop/angle valve 15 mm dia cast copper alloy CP Fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete
S&F in repair CP bib taps cast copper alloy fancy type with cruth or butterly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete.
S&F in repairs 15mm bore, fancy type Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete.
S&F in repairs brass 15 mm CP central hole mixer pillar tap for mixing hot & cold water screwed down for iron pipe, fixed complete.
S&F in repairs brass CP wall mixer for mixing hot & cold water for iron pipe of 15 mm bore size complete.
S&F in repair glass corner shelves fancy type 6mm thick 250 x 250mm size and fixed over CP brass brackets & similar to cat BEA-48 of prayag complete.
S&F in replacement PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F in repairs PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) bends any radius, 75 mm bore complete.
S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete.
S&F in repairs PVC (SWR) vent cowl, 110 mm dia complete.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
M&L for Reinforced concrete pipes, class NP2, 150mm dia laid and jointed complete with collars complete.
M&L for Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested complete.
M&L for in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete.
Taking down carefully aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for One light point controlled by one switch complete
All as per Item No 96 above but for One fan point controlled by one switch.
All as per Item No 96 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 96 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 96 above but for One bell point controlled by one bell push.
All as per Item No 96 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F angle holder, insulated polycarbonate body with back plate complete.
S&F modular switch one way 6 amp 1 module complete
S&F modular switch one way 16 amp 1 module complete
S&F modular socket 6 amp 2/3 pin combined 2 module complete
S&F modular socket 6/16 - 2/3 pin combined 2 module complete
S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete
S&F modular hum free electronic step fan regulator, 100 watt 2 module complete
S&F bell multi music type, AC, 240 volts complete.
S&F bell push, flush type, 6 amp 240 volts complete.
S&F in replacement of existing unsv CFL lamp with LED lamp 9 watt complete.
S&F in repairs MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F in replacement 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F in replacement LED 20W street light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection with fixing arrangement and connections & similar to cat LST 20 CDL of make Crompton type complete
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
M&L in repairs submain wiring with 2x4 sqmm and earth continuity 1x4 sqmm conductor PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit medium grade 20 mm dia conduit ISI marked ivory colour along with accessories complete.
M&L in repairs submain wiring with 2x6 sqmm and earth continuity 1x6 sqmm conductor PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit medium grade 25 mm dia conduit ISI marked ivory colour along with accessories complete.
S&F in repairs sheet metal enclosure single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete.
M&L in replacement earthing with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate and shown in EP-3 of SSR Part-I. complete.
S&F in repairs MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F in repairs MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in MES store yard.
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete.
S&F water heater 25 litre capacity BEE star rating 5, vertical pattern in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation complete and with all fitting and fixing accessories including PVC pipe connection complete
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35sq. Mm X 2Core complete
Excavating in trenches in soft / loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete.
Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point complete.
Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete.
M&L for Sub Class 'B' bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required as in protection of cable complete.
M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying including gently punning around cables & stretching and testing the cable complete.
r s corporation
SANVI ASSOCIATES
TECH SERVE SOLUTIONS
DMA PROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .