KSRTC Bus Terminal Complex at Angamaly Installation of electrical panel boards

Amount

Mechanical Equipments

supply, conveyance, installation testing and commissioning of floor mounting fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 2.00 mm CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. Incoming: 400 A TPN ISOLATOR - 1 no Busbar- 400 A best conductivity aluminium TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required Out going: 200A TPN SFU with 125 A HRC fuse - 2 Nos Danger notice board of standard patterns- 1 No

Supply, laying and clamping of one number PVC insulated and PVC sheathed armoured/ XLPE aluminium power cable of 1.1KV grade of the following sizes using clamps noted along with the cables, spacing of the clamps not exceeding 60 cms, making good the damages, 3.5C x 400 sqmm armoured aluminium cable with factory made clamp

Supplying siemens / tropodur type nickel plated single compression brass cable gland earth clamps,aluminium cable socket etc for PVC insulated and PVC sheathed armoured aluminium conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required. 3.5C x 400 sqmm

Meter Panelling Board Supply, conveyance, installation testing and commissioning of floor mounting,fully partitioned dust and vermin proof panel assembly as per IS 8623 (with latest amendments)Comprising of the following components/devices using 1.60 mm CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, switch gear compartments and hinged doors for each switch gear , providing vision panel for the energy meter compartment as per KSEBL requirement, earthing the hinged doors using 4 sq mm braided copper conductor, earthing the panel using copper strip, providing cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. (cable top entry) Incoming: 200 A TPN ISOLATOR -1 No Busbar- 200 A best conductivity aluminium TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. out going: 1) 100A TPN SFU - 4 NOs 2) 63A 4 POLE MCB - 4 NOs 3) Space provision shall be made for fixing energy meter, cut outs etc as per KSEBL requirement- (one set in each outlet) Accessories 1) RYB phase indicators with control fuse - 1 Set 2) Danger notice board of standard patterns - 1 NO

Supply, laying and clamping of one number PVC insulated and PVC sheathed armoured/ XLPE aluminium power cable of 1.1KV grade of the following sizes using clamps noted along with the cables, spacing of the clamps not exceeding 60 cms, making good the damages, 3.5C x 185 sqmm armoured aluminium cable with factory made clamp 25x3 mm ms flat

Supplying siemens / tropodur type nickel plated single compression brass cable gland earth clamps,aluminium cable socket etc for PVC insulated and PVC sheathed armoured aluminium conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required. 3.5C x 185 sqmm

Supply and providing one meter wide 2mm thick electrical grade anti skid class A insulation floor mat 3.3 kv grade,30 kv BDV made from highly electrical resistance elastomers conforming to IS 15652/2006

Supply and clamping 25 x 3 mm copper strip tinned at the points of contact along with cable tray or in cable trench

Preparation of all drawings,submitting and getting approval from Electrical Inspoctorate,submitting of completion certificates and arranging inspection, getting sanction and energisation certificates from Electrical inspectorate & KSEB for commissioning of the installation .All statutory payments will be reimbursed on production of the original receipts

AKSHAYA ELECTRICAL CONTRACTORS (BID ID -2037680)