Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-Finance | L1 | Accepted-Finance AS PER NIT | |
| 2 | L2₹1.0 L−₹7.7 L (88.2%)Accepted-Finance HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171002 | L2 | Accepted-Finance AS PER NIT | |
| 3 | L3₹10.4 L+₹1.7 L (19.1%)Accepted-Finance VILLAGE DHAR P O DASHERA TEH BALH REWALSAR DISTT MANDI HP 175036 | REWALSAR | MANDI | HIMACHAL PRADESH | 175036 | L3 | Accepted-Finance AS PER NIT | |
| 4 | L4₹12.6 L+₹3.9 L (45.0%)Accepted-Finance VILLAGE KHAROTA P O BERTHIN TEHSIL JHANDUTTA DISTT BILASPUR HP | BILASPUR | HIMACHAL PRADESH | 174001 | L4 | Accepted-Finance AS PER NIT | |
| 5 | L5₹16.0 L+₹7.3 L (83.4%)Accepted-Finance | L5 | Accepted-Finance AS PER NIT |
Tender Value
₹9.7 L
EMD Value
₹19,500
Closing Date
2 May 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Xen RDD Mandi
Old Zila Parishad Building Jail Road Mandi
Construction of BANKE BIHARI GAUSADAN PO CHAILCHOWK GRAM PANCHAYAT CHACHIOT DEVELOPMENT BLOCK GOHAR TEHSIL CHACHIOT DISTT MANDI (H.P) SH Site development and Gosadan Building
2023_DRDPR_72383_1
173-178
Open Tender
Civil Works - Buildings
Item Rate
120 days
Chailchowk
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
Xen RDD Mandi
₹19,500
3 May 2023
24 Apr 2023
3 May 2023
24 Apr 2023
2 May 2023
24 Apr 2023
Amount
Cutting in earth work etc. in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth including carriage as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing and laying, mechanically mixed and vibrated cement concrete 1:5:10 (one cement:Five sand Ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
Supplying, filling, spreading & leveling stone boulders /stone soling hand packed of size range 50mm to 200mm,(Fifty to two hundred milimeter) under floor/path as soling etc, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1one Cement : 2 two coarse sand) : 4 four graded stone aggregate 20 mm(twenty milimeter) nominal size.all complete.including carriage of materials with in all leads, lifts and other incidentals.
Hot finished welded type tubes steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.including carriage of materials with in all leads, lifts and other incidentals.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing 1 mm (One milimetre) thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm (Three milimetre) M.S. gusset plates at the junctions and corners, 25 mm dia(Twenty five milimetre) pulley, 40x40x6 mm (fourty x fourtyx six) angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer.complete.including carriage of materials with in all leads, lifts and other incidentals.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(Seven point Five) in foundation and plinth level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in cement mortar 1:4 (one cement: four sand)including carriage of material as required in all leads & lift in all levels and other incidentals complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing 0.63 mm ( zero point six three millimetre) thcik with zinc coating not less than 275 gm/m2 corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter(eight Millimetre ) with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing 0.63mm ( zero point six three millimetre) thcik with zinc coating not less than 275 gm/m2 ridges or hips of width 60 cm(sixty centimeter) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete. all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Nirmal Singh
CHUNI LAL
VIVEK KUMAR
Tarun kumar
Gaurav
SHEHWAJ KHAN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .