CONSTRUCTION and RAISING THE HEIGHT OF SHREE MAYURESHWAR GANESH MANDIR COMPOUND WALL IN WARD NO. 09 MAYUR NAGAR, SUDARSHAN NAGAR IN ZONE NO. 04.

PROVIDING SECOND CLASS BURNT BRICK MASONRY WITH CONVENTIONAL/ I.S. TYPE BRICKS IN CEMENT MORTAR 1:6 IN FOUNDATIONS AND PLINTH OF INNER WALLS/ IN PLINTH EXTERNAL WALLS INCLUDING BAILING OUT WATER MANUALLY, STRIKING JOINTS ON UNEXPOSED FACES, RAKING OUT JOINTS ON EXPOSED FACES AND WATERING ETC. COMP. BD.G. 1 PAGE NO. 313

PROVIDING SAND FACED PLASTER EXTERNALLY IN CEMENT MORTAR USING APPROVED SCREENED SAND, IN ALL POSITIONS INCLUDING BASE COAT OF 15 MM THICK IN CEMENT MORTAR 1:4 USING WATERPROOFING COMPOUND AT 1 KG PER CEMENT BAG CURING THE SAME FOR NOT LESS THAN 2 DAYS AND KEEPING THE SURFACE OF THE BASE COAT ROUGH TO RECEIVE THE SAND FACED TREATMENT 6 TO 8 MM THICK IN CEMENT MORTAR 1:4 FINISHING THE SURFACE BY TAKING OUT GRAINS AND CURING FOR FOURTEEN DAYS SCAFFOLDING ETC.COMPLETE. BD.L.7 PAGE NO. 369

PROVIDING AND LAYING CAST IN SITU/ READY MIX CEMENT CONCRETE M-15 OF TRAP/ GRANITE/ QUARTZITE/ GNEISS METAL FOR COPING TO PLINTH OR PARAPET, MOULDED OR CHAMFERED AS PER DRAWING OR AS DIRECTED INCLUDING STEEL CENTERING, PLYWOOD/ STEEL FORMWORK COMPACTING, RUOUGHENING THEM IF SPECIAL FINISH IS TO BE PROVIDED, FINISHING UNEVEN AND HONEYCOMBED SURFACE AND CURING ETC. COMPLETE. THE CEMENT MORTAR 1:3 PLASTER IS CONSIDERED FOR RENDERING UNEVEN AND HONEYCOMBED SURFACE ONLY. NEWLY LAID CONCRETE SHALL BE COVERED BY GUNNY BAG, PLASTIC, TARPAULIN ETC. (WOODEN CENTERING WILL NOT BE ALLOWED) WITH FINE AGGREGATE (CRUSHED SAND VSI GRADE) BD.E. 3 PAGE NO. 288 I.S. 456 (2000)

PROVIDING AND ERECTING CHAIN LIN FENCING 1.6 M. HEIGHT WITH G.I. CHAIN LINK OF SIZE 50 X 50 MM 8 GUAGE THICK AND FIXED 75MM ABOVE GROUND LEVEL ON VERTICAL M.S. ANGLE OF 40 X 40 X6 MM SIZE INCLUDING EXCAVATING PITS FOR FOUNDATION AND EMBEDDED IN C.C. BLOCKS OF 1:4:8 MIX OF SIZE 450 X 450 X 670MM AT 1.75 M.C/C WITH IRON BAR 16MM DIA AD HOLD FAST INCLUDING WELDING LINK WITH ANGLE FRAME AT 30 CM/ C/C WITH NUTS AND BOLTS AND HORIZONTAL M.S. ANGLES AT TOP AND BOTTOM OF 25 X 25 X 5MM SIZE AND VERTICAL M.S. FLAT 35 X 5MM AND 25 X 5MM HORIZONTAL INCLUDING CROSS SUPPORT OF 40 X 40 X 6MM ANGLES BOTH SIDES AT EVERY CORNER OR BENDS EMBEDDED IN CONCRETE BLOCKS OF 1:4:8 OF SIZE 450 X 450 X 670 MM INCLUDING 3 COATS OF OIL PAINTING ETC. COMP. AS DIRECTED BY ENGINEER IN CHARGE.

PROVIDING AND FABRICATING STRUCTURAL STEEL WRK IN ROLLED SECTIONS LIKE JOINTS, CHANNELS, ANGLES, TEES ETC. AS PER DETAILED DESIGN AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSTION MAKING RIVETED/ BOLTED/ WELDED CONNCECTION WITHOUT CONNECTING PLATES, BRACES ETC. AND INCLUIDNG ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF BD.C. 2 PAGE NO. 275

PROVIDING AND APPLYING WHITE-WASH IN TWO COATS ON OLD / NEW PLASTERED OR MASONRY SURFACES AND ASBESTOS CEMENT SHEETS INCLUDING SCAFFOLDING AND PREPARING THE SURFACE BY BRUSHING AND BROOMING DOWN ETC. COMPLETE.

PROVIDING AND APPLYING PLASTIC EMULSION PAINT OF APPROVED QUALITY, COLOUR AND SHADE TO OLD AND NEW SURFACES IN TWO COATS INCLUDING SCAFFOLDING, PREPARING THE SURFACE. (EXCLUDING THE PRIMER COAT)ETC. COMPLETE. AS DIRECTED BY ENGINEER IN CHARGE.