Supplying fitting and fixing placement of reputed branded office furniture at Paribesh Bhawan 10A LA Block Sector III Salt Lake City Kolkata 700 106 during the year 2018 19

Amount

Supply & Fitting Fixing of Work Table with ERU : Supply, fitting, fixing & placement of Work Table with ERU from reputed branded Manufacturers and as per approved drawing & design / secification.Worktop Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around.Side Panels Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC Edge band on the user side and 0.8 mm on the Top and Bottom Side. The side panels have 2 glide screws each for leveling of the desk. Modesty Panel Made from 18 mm Thick Pre-laminated Particle board. All the edges are sealed with 0.8 mm thick PVC edge band all around.Freestanding Pedestal The freestanding pedestal is made from 18 mm Pre-laminated Particle board with a combination of 2mm and 0.8 mm PVC Edgeband on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth operation. All the pedestal drawers are centrally locked with a single key.

Supply & Fitting Fixing of Executive Table with Back Unit: Supply, fitting, fixing & placement of Executive Table with Back Unit from reputed branded Manufacturers and as per approved drawing & design / secification . Main Desk Work top MDF + VENEER + PU Coating, Size : 2400 W * 900 D * 750 H, TOP THICKNESS – 65 mm.Mobile PedestalMDF + Veneer + PU Coating , Size : 510W * 635H * 445D mm.ERU Top MDF + VENEER + PU Coating, Size : 1200 W x 445 D x 660 H TOP THICKNESS – 25 mm. Back Unit Size : 2215 x 410 x 2000

Supply & Fitting Fixing of revolving Visitor Chair: Supply, fitting, fixing & placement Revolving Visitor chair of reputed branded Manufacturers and as per approved drawing & design / secification Dimension 61.4 cm. (W), 64.5 cm. (D), 89.5 cm (H) , 46.5 cm. (SH) . 100% VOC free powder coating, Knock-down design reducing transportation emissions, Designed for long life and easy part replacement 99% recyclable. The seat and back are made up of 1.2 plus / minus 0.1 thick hot -pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The HR polyurethane foam is moulded with density = 45 plus/minus 2 kg/m3 and hardness load 16+_ 2kgf as per IS:7888 for 25% compression. The one -piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated (DFT 40-60 microns )tubular frame is cantilever type & made of 2.54 plus /minus 0.03cm. X 0.2 plus /minus 0.016cm. Thk. M.S.ER.W.Tube.

Supply & Fitting Fixing of 3 Seater Sofa Supplying, fitting, fixing and placement of 3 seater Sofa Set of reputed branded Manufacturers and as per approved drawing & design / secification of Engineer-in-charge. Size: Width : 1700-1750 x Height 700-750 x Depth 850-900 mm STITCHING: THREAD , Poly Proplin of Nylon , Polyester of PVC top Thickness 0.9 mm FRAME: TROPICAL WOOD / PINE WOOD/ RUBBER WOOD with Anti – Tremite Treatment (Borex Powder Treatment. Thickness of Plywood to be used - 12mm & 18mm of IS 303 Commercial Plywood. PVC/FabricSEAT FOAM: (DENSITY, TYPE)* Provide weight of recron filling used per seat* Thickness (mm) : 69, 22 & 10 mm Density (Kg/m3): 32d - 28d Type of Foam : Vergin Always / in some case Moulded - Dencity :- 48d. BACK FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm Density (Kg/m3):26 d - 32 d. ARMREST FOAM: (DENSITY, TYPE) Thickness (mm) : 45 mm. Density (Kg/m3): 26 d BELT/ WEBBING MATERIAL: Width of belt (mm): 68mm - 48mm Total length of belt used (mm): 68mm :- 2500mm (2) 48mm :- 2000mm.

Supply & Fitting Fixing of 3 Seater Sofa: Supplying and placement of Sofa Set 3 from reputed branded Manufacturers and as per approved drawing & design / secification of Engineer-in-charge.The LH/RH side frame shall be fitted to the two ends of the seat/back mounting frame to form the leg assembly. It shall be made of SS J4 Grade tube dia 4.44 cm. x 1.5mm thk. The seat/back mounting frame assy. shall holds the two side frames together. The mounting frames, 2nos shall be used to connect the side frames. The mounting frame shall be made of MS. E.R.W.tube dia 5.08±0.03cm. x 3.15±0.0252cm thk. black painted. The seat /back shall be mounted on 4.0±0.03cm x 2.0±0.02cm x 0.2±0.016cm thk M.S. rectangular tube which shall be welded on the beam of seat/back mounting frame. The seat/back assembly shall consists of 1.2±0.1cm thk plywood insert with Polyurethane foam having density= 45+/-2 Kg/m3 and hardness of the P. U. foam= 18 to 22 kg on Hampden m/c for 25% compression of the foam. The complete moulded seat/back assembly shall be covered with a replaceable fabric upholstery cover. The dimensions of seat and back shall be: 54.5 cm. (W)x46.7cm. (D)x 12.5cm. (T). The side frames shall be fitted with front and rear bottom shoes made of injection moulded polypropylene. The sofa shall be upholstered with stain repellant "Velvetine plus" fabric as a standard offering. The velvet fabric should be vacuum cleaned in order to remove dirt & grit from the fabric surface. Upholstery covers made from Velvetine fabric should not be soap washed or dry cleaned. Overall Dimensions shall be Seat Height - 41.5 cm, Height - 74.5cm, Width & Depth as measured from pedestal - Width-183.0cm and Depth-77.5 cm.

Supply & Fitting Fixing of Very High Back Chair: Supplying, fitting, fixing and placement of Very High Back Chair from reputed branded Manufacturers and as per approved drawing & design / secification of Engineer-in-charge. The seat is made up of 1.2 cm. thick hot pressed plywood upholstered with leather and moulded Polyurethane Foam. The back foam is designed with contoured lumber support for extra comfort.(HIGH BACK) SIZE: 53.0cm.(W) X 62.0cm.(H),SEAT SIZE: 49.0cm.(W) X 48.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20+/-2 on Hampden machine at 25% compression.The seat and back are arrested together with a 9.0cm. (w) spine made of 0.8cm thk. HR steel. The spine is black powder-coated.The armrest assy. comprises of three parts viz. the armrest support tube and P.U.armrest and the armrest top. The armrest tube assy. is made of 2.54cm(1") x 16 BG. M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S. insert. The armrest top is made of ABC & upholstered with foam & leather.FRONT PIVOT SYNCHRO TILT MECH. ): The mechanism is designed with the following features:360° revolving type.12° Seat tilt 19° Black tilt.Front pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment. 5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock is realeased. Static seat depth adjustment = 5.0cm with 5 position locking.The seat base assy. is designed with following features:360° Revolving type without back tilt.The bellow is 1 piece and blow moulded in black Polypropylene.The pedestal is made of die-cast aluminium with buffing finished. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 cm pitch-center dia. (77.0 cm with castors).The twin wheel castors are injection moulded in black Nylon.

Supply & Fitting Fixing of Coffee Table: Supplying, fitting, fixing and placement of Coffee Table from reputed branded Manufacturers and as per approved drawing & design / secification of Engineer-in-charge. Size : 1115Wx 515Dx 335H.

Supply & Fitting Fixing of Centre Table: Supply, fitting, fixing & placement of Centre Table Model from reputed branded Manufacturers and as per approved drawing & design.Glasstop Table with Wooden Understructure.

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR