Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST BIDDER L1 | |
| 2 | L2₹35.8 L+₹80,824 (2.31%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bidder | |
| 3 | L3₹36.3 L+₹1.3 L (3.57%)Rejected-Finance D NO 71 31 252 DURGANAGAR MALKAPURAM VISAKHAPATNAM 530011 | VISAKHAPATANAM | ANDHRA PRADESH | 530011 | L3 | Rejected-Finance Other than the lowest bidder | |
| 4 | L4₹37.5 L+₹2.5 L (7.23%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bidder | |
| 5 | L5₹39.4 L+₹4.4 L (12.4%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bidder |
Tender Value
Refer Docs
EMD Value
₹87,800
Closing Date
29 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) (CG) Vizag
AGE (I) (CG) VIZAG MALKAPURAM VIZAG 14
IMPROVEMENT OF RECREATION WAITING ROOM AND EXTENSION OF OFFICERS LOUNGE AT P 24 BUILDING IN COAST GUARD COMPLEX MALKAPURAM VISAKHAPATNAM
2023_MES_586803_2
AGE(I)CG/VIZ/TOKEN 45 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Visakhapatnam
IMPROVEMENT OF RECREATION WAITING ROOM AND EXTENSION OF OFFICERS LOUNGE AT P 24 BUILDING IN COAST GUARD COMPLEX MALKAPURAM VISAKHAPATNAM
6 documents required · 6 mandatory
₹500
AGE (I) (CG) VIZAG
₹87,800
Yes
22 May 2023
8 Apr 2023
1 May 2023
8 Apr 2023
29 Apr 2023
12 Apr 2023
Amount
Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and exceeding 1.5 M depth and not exceeding 3 M for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and as directed.
M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
M & L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and plinth beams mass concrete complete all as specified and as directed.
M & L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts complete all as specified and as directed.
M & L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) in Beams, cantilevers, lintels over 1.5 M span complete all as specified and as directed.
M & L for Reinforced Cement Concrete M30 (using 20 mm graded granite stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and as directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and so fits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surface of concrete complete all as specified and as directed.
M & L for Rough finished Square, rectangular or polygonal Steel Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed.
M & L for for Fair finished flat Steel Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. complete all as specified and as directed.
Material and Labour for Fair finished flat Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed by Engineer in charge.
M & L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.
M & L for Mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.
M & L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- Liquid WPC will be measured and paid separately)
M&L rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral liquid water proofing compound.
M & L for Preparing old plastered / new plastered surfaces of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint of approved make and shade over a coat of approved primer over wall care putty as recommended by the manufacturer on surfaces of walls complete all as specified and as directed . Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux
M & L for Preparing old plastered / new plastered surfaces of walls and ceilings and applying two coats of plastic Emulsion paint of approved make and shade over a coat of approved primer over wall care putty as recommended by the manufacturer on surfaces of walls complete all as specified and as directed . Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux
M & L for Preparing old plastered / new plastered internal surfaces of walls and applying one top coat of metalic royal play emulsion paint (PG V) of approved colour and approved pattern (co-polymer emulsion based) over one base coat of royal play of approved make and shade over a coat of approved primer over wall care putty as recommended by the manufacturer on surfaces of walls complete all as specified and as directed . Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux
S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets, framing (beam, tee, angle, channels or flat sections) including distance pieces cleats etc. complete all as specified and as directed.
S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410 - W (grade E - 250) quality "A" complete all as specified and as directed.
S & F for Mild steel angles , bars , flats, etc as in supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins, bolt and nuts and similar small articles confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.
M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint.over one coat of red oxide complete all as specified and as directed. Make: Shalimar Paints Ltd. [Superlac] / Asian [Apcolite] / Berger [Luxol] / Jenson & Nicholson Paints Ltd [Brolac]
S & F Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge. MAKE : M/s TATA BLUE SCOPE /M/s LLOYD INSULATIONS INDIA LTD/ M/s BUILD TECH/ M/s. JSW /JINDAL
S & F Pre-painted galvalume aluminum zinc coating plain sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge. MAKE : M/s TATA BLUE SCOPE / M/s LLOYD INSULATIONS INDIA LTD / M/s BUILD TECH / M/s. JSW/ JINDAL
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed
Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed
M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering including ramming complete all as specified and as directed
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed
M&L for Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base/plinth protection complete all as specified and as directed.
M & L for 100 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in sub base flooring complete all as specified and as directed.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) removal serviceable tiles to store and rubbish of the premises complete all as specified and as directed.
M&L for 40 mm thick PCC 1:2:4 type B-2 (using 20 mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B-2 (using 20 mm graded stone aggregate) as in sub base of floor finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of mortar for laying tiles in CM 1:4 complete all as specified and as directed. Make : Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / Nitco / Orient Bell Ltd/ Oasis Vitrified Pvt. Ltd (Premium Quality)
M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors / Skirting / Dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour including 10 mm thick cement plaster in CM 1:3 for laying tiles in skirtings, dados, risers etc. complete all as specified and as directed by
M&L 20 mm thick granite (of any type) tiles machine cut in floors/ floor slabs including half round edges and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including 15 mm thick screed bed or bedding layer of mortar for laying granite in CM 1:4 complete all as specified and as directed.
M&L 20 mm thick granite (of any type) tiles machine cut in skirting/dado/cladding including half round edges and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including 10 mm thick cement plaster in CM 1:3 for laying tiles in skirtings, dados, risers etc. complete all as specified and as directed.
M & L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) all as specified and as directed.
M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.
M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.
S & F of Aluminium Composite Panels (ACP) cladding on column, ceiling, facia and wall of approved colour shade and pattern to be provided on exposed external surfaces with and including all necessary aluminium frame work complete as directed. The panel shall consist of 3 mm thermoplastic core of antitoxic LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4 mm with outer surfaces finished with PVDF based coating 30 micron, inner surfaces finished with a thin coat of polyester paint fixed on aluminium panel of grid size shall be n. exc. 2 sqm and size of section shall be 38 mm x 50 mm and 1.5 mm thick and grid shall be fixed to wall by flat iron clams 25mm x 6 mm at the distance not more than 1.0 M center to center and fixed as as per manufacturer's instruction and colour/texture/pattern shall be approved by AGE (I). Make: ALSTONE/ DURABUILD or Equivalent as approved by AGE(I)
S & F of aluminium composite panels (ACP) with necessary aluminium frame work as per the site requirement of approved colour shade and pattern to be provided in opeings/exposed building surfaces complete as directed. The panel shall consist of 3 mm thermoplastic core of antitoxic LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4 mm with outer surfaces finished with PVDF based coating 30 micron, inner surfaces finished with a thin coat of polyester paint fixed on aluminium panel of grid size shall be n. exc. 2 sqm and size of section shall be 38 mm x 50 mm and 1.5 mm thick and grid shall be fixed to wall by flat iron clams 25mm x 6 mm at the distance not more than 1.0 M center to center and fixed as as per manufacturer's instruction and colour/texture/pattern shall be approved by AGE I. Make: ALSTONE/ DURABUILD or Equivalent as approved by AGE(I)
S & F in repair 12mm thick toughened & frosted glass with etching and frosting as per design for glass partition/door fixed with necessary screws, sealent , stainless steel patch, and all fitting etc complete with all stainless steel builders hardware used as per site requirement and all as directed by Engineer-in-Charge. Note :- Unit rate quoted to be deemed to include for cost of all material & labour and no other item shall be measured and paid separately Make: Saint Gobain Glass / Modiguard Float Glass or equivalent as approved by AGE (I) .
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
M & L for double layered decorative false ceiling grid comprising of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40mm long including Gypsum borad of 12mm thick in ceiling and including two coats of plastic emulsion paint over a coat of alkali resistant primer and two coats cement based wall care putty and including dismantling of old ceiling and lilght fittings of any type in any position complete all as per manufacturers' instructions and complete all as specified and as directed.
Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. (ii) Area not exceeding 2.00 sqm each. Make: Kumar Arch Tech Pvt. Ltd./Sintex India Ltd. /Polywood/ M/s. NCL Veka/ Rajshri Plastiwood Ltd / or Equivalent as Approved by AGE (I)
S & F 5.5 mm thick sheet glass ordinary quantity and glazing with oil putty in squares exceeding 0.50 sqm in each pane complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass or Equivalent.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Taking down chowkhat or frames of aluminium with shutters (without taking off shutters from the frame) area exc 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and as directed.
(E/M PORTION) Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light , fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc. and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putty or white / colour wash all as required and as directed by Engineer-in-Charge.
Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories
Supply, laying and testing XLPE cable of size 4 core 16 sq mm insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified nad as directed. Make- Polycab /KEI /Gloster or equivalent make specified in PS.
S&F in repairs double door metallic sheet metal enclosure for DB when MCBs to be used TPN 4 ways, 415 V complete fixed properly on in concealed position on wall and suface position on trusses and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including providing of suitable size of lugs and blanking plate all as directed. Make Legrand/Scheinder/L&T or equivalent make specified in PS
S&F in repairs double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 230 V complete fixed properly on in concealed position on wall and suface position on trusses and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires including providing of suitable size of lugs and blanking plate all as directed. Make Legrand/Scheinder/L&T or equivalent make specified in PS
S&F in repairs, testing and commissioning of MCB TPN 415 volt 40 - 100 Amp 25 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed. Make Legrand/Scheinder/L&T
S&F in repairs, testing and commissioning of MCB SPN 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed. Make Legrand/Scheinder/L&T
S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed. Make Legrand/Scheinder/L&T or equivalent make specified in PS
Supply and fixing modular AC Box (white), plug and 3 pin socket two in one,all in one type,single pole and neutral box with one single pole MCB 25 A 230 Volts complete all as specified and as directed. Make- Havells cat no. DHDMCSN0251016 or equivalent make specified in PS.
Supply and installation of tower AC complete with cordless remote control unit with minimum 5 star rating of capacity 2 TR operating at 230 V 50 HZ supply complete all as specified and as directed. Make- Voltas/Hitachi/Blue star/LG or equivalent make specified in PS Note : The unit rate quoted by the contractor shall include the following : (a) Fixing the cooling unit with grouting nuts,cutting grooves to wall for gas pipe and water drain pipe complete. (b) Supply and fixing,cutting bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting wall including brazing copper pipe fixing union all as required at site. (c) Supply and fixing PVC pipe 20 mm dia transpaent heavy duty for drainage pipe. (d) Insulation of both copper pipe with insulating material and covering the complete pipe with PVC casing pipe complete. (e) Charging of correct quantity of refrigerant gas F22/134A after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load to obtain 18 degree celsius temperature. (f) Supply and fix copper tubing,connecting cable,outdoor unit bracket,drain pipe with insulation requires apart from standard company packing and shall be deemed to be included in unit rate.
S & F in repairs Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA. Make : V- Guard / Microtek / Everest or equivalent in makes specified in PS.
M & L sub main wiring on surface with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in and including PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete of size not less than 25 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc. fixed properly including taking down old unserviceable sub main wiring complete. Make of wire: Polycab/Finolex/KEI or equivalent specified in PS.
M&L sub main wiring on surface with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in MS/PVC conduit with 6 Sq mm PVC-FRLS insulated unsheathed multi- stranded copper conductor as a continuous earth wire complete excluding rigid stove enamelled steel conduit (ISI marked ) of size not less than 25 mm dia in concealed / surface wiring inclusive all fittings such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddles, pipe hooks etc. fixed properly including taking down old unserviceable sub main wiring complete. Make of wire: Polycab /Finolex/KEI or equivalent specified in PS
M & L for Modular concealed point wiring on wall and ceiling/roof etc with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade (ISI marked) not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized Modular sunken boxes made out of MS sheet of standard thickness with earth dolly and crown plate and cover plate for fixing of modular switches/sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc. with captive MS screw including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light/fan/Exhaust fan/Calling bell point controlled by one switch.
All as per item No. 71 here-in-before but for one 5 Amp socket point controlled by one switch on independent board.
All as per item No.71 here-in-before but for one 5 amp socket point controlled by one switch on sameboard.
All as per item No.71 here-in-before but for power point wiring with 4 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead.
M&L for modular bell push, flush type 5 Amps white finish complete all as specified. Make : Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS.
S&F Modular switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and as directed. Make : Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS.
S&F Modular switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified. Make : Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS
S&F Modular socket outlet 5 pin, 5 Amps flush type white finish complete all as specified. Make : Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS
S&F Modular socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 Vtwo module complete white finish complete all as specified. Make : Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS
S&F ceiling rose, surface backlite, 65 x 20 mm three terminal.
S & F ceiling fans, complete with three blade, down rod, accessories 230V, 1200 mm sweep, with Squirrel cage induction motor complete all as specified and as directed. Make-Havells/Bajaj/Khaitan/Usha/Crompton Greaves or equivalent specified in PS
S&F Modular electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified. Make:- Havells / Anchor / Legrand / Schneider or equivalent in makes specified in PS
Supply and install Water heater (Geyser) storage type of capacity 25 Liters glass lined coated inner tank , suitable installation including 02 KW heating element, cable with 3 pin plug top etc. complete all as specified and as directed. Make: V-Guard /Havells or equivalent in the makes detailed in list of makes in Particular Specifications.
S & F Fibtre Reinforcd PVC nylon pipe heavy duty of size 600 mm long, 15 mm bore with brass coupling chromium plated with rubber washer at both ends as per IS complete all as specified and as directed.
S & F stop valve, cost copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed of size 15 mm complete all as specifed and as directed at site. Make- Jaquar or equivalent in the makes detailed in list of makes in Particular Specifications.
S & F Bib taps, Chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm complete all as specifed and as directed at site. Make- Jaquar or equivalent in the makes detailed in list of makes in Particular Specifications.
S & F PVC connection for Hot Water 15 mm with CP nuts and bolts and washers of length 600mm complete all as specifed and as directed at site.
S & F PVC connection for cold Water 15mm with CP nuts and bolts and washers of length 750 mm complete all as specifed and as directed at site.
S & F Calling Bell, musical 230 Volt, AC complete all as specified and as directed. Make-Anchor/Havells or equivalent make specified in PS
S & F for down lighter 12 watt recessed in false ceiling 230 Volt single phase complete all as specified and as directed. Make: Philips/Wipro/ Havells or equivalent in makes specified in PS
S & F for focus light 50 w 230 Volt single phase complete all as specified and as directed. Make: Philips/Wipro/ Havells or equivalent in makes specified in PS
S & F of CFL 20 watt 230 Volt single phase complete all as specified and as directed. Make: Philips/Wipro/ Havells or equivalent in makes specified in PS
S & F of Holder suitable ofr CFL 20 watt 230 Volt single phase complete all as specified and as directed.
S & F exhaust fan 300 mm, 900 RPM 240 Volts including cutting of circular hole suitable for 450 mm sweep exhaust fan grouting nuts and bolts and finishing disturbed surfaces complete all as specified and as directed. Make- Khaitan/USHA/BAJAJ/Crompton Greaves or equivalent in makes specified in PS
M & L for making circular holes suitable for fixing of 12” sweep Exhaust fans by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete all as required at site and directed by the Engineer-in-Charge.
S & F Slim type LED luminaire 600 m x600 mm ,35/36 watt,220 volts AC recessed type with high efficiency PMMA diffuser soft galre free light complete with driver and driver holder and LED Lamp and suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make: Philips/Wipro/ Havells or equivalent in makes specified in PS
S & F in repairs LED Security light with high energy saving LED, powder coated pressure die cast aluminium housing specially designed specular anodized super high purity, faceted aluminium reflector of size 30 Watt 230 volts IP-65 complete all as specified and as directed. Make-Havells / Philips/Bajaj or equivalent as specified in PS.
M&l for bracket made out of GI pipe 25mm dia medium grade,0.9 mtr long bent to shape with welded MS flat 25 x 4 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 4mm thick FI nuts, bolts complete all as directed by Engr-in-charge including taking down old unserviceable GI bracket.
Supply & fix AC single phase static energy meter of accuracy class 1.0, 240 V 50 Hz with Baklite LCD display of rating 10 - 60 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box with fixing on MS meter sunken box. Make- Secure/HPL or equivalent make specified in PS
M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification complete all as specified and as directed.
JAHNAVI ASSOCIATES
SRI VENKATA SAI MANIKANTA CONSTRUCTIONS
HARSHA CONSTRUCTIONS AND ENGINEERING WORKS
ANJANA ENTERPRISES
RAGHU RAMA PANDA
K SATYANARAYANA ENTERPRISES
SIVA MARUTHI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .