PIP Mechanical worksPatch work and painting of Neduvaramkodu Aqueduct Cross Regulator Shutter

Amount

Cleaning of work site, dismantling the old structures, demolishing the existing civil structure and providing concrete for fixing new embedded parts etc.

OD24685/2022-2023:Clearing grass and wild bushes from banks of canal, removal of silt/rubbles, zoological waste and other debris from canal bed including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

OD24686/2022-2023:Taking out of shutter from the grooves after dissembling from the old hoisting mechanism and placing safely on nearby suitable place not more than 50m from the site, then hooking it back into grooves after completing works on shutter and embedded parts as per direction of deptl officer at site including cost of all labour, conveyance charges, all lead and lift etc.

OD24687/2022-2023:Dismantling of the Canal Shutter / Hoisting Unit including wire rope / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery, labour etc. complete as directed by the departmental officer at the site.(Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 % )

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

OD24707/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD24706/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24705/2022-2023:Supply of MS round bar including cost of conveyance charges

OD24688/2022-2023:Fabrication and erection of Embedded parts and accessories for canal shutter as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD24708/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

OD24709/2022-2023:Providing temporary platform for demolishing existing civil structure, concreting and plastering including cost of all materials, labours etc. complete TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

Supply, Patch work, Painting of shutter & fixing of rubber seal, thrust rollers etc.

OD24739/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD24738/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24696/2022-2023:Patch work of Structural steel canal gate and accessories as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD25323/2022-2023:Overhauling of thrust roller assembly unit (240mm OD, 70mm tread width, MS shaft of dia 70mm and length 400mm) including dismantling, bush replacing and refitting, hire charge of equipment, labour charges, energy charges, conveyance charges, all leads and lifts etc. complete as per directions by the dept. officers at site.

OD24697/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance charges complete as per approved specification or drawing.

OD24698/2022-2023:Supplying and fixing in correct position with specified initial interface L-type/Bulb nose rubber seal confirming to IS11855 to the canal shutters including cost of MS bolts & Nuts, all labour, machinery, incidental and conveyance charges complete as per approved specification or drawing.

OD24700/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) and accessories safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc. complete as per direction of departmental officer at site.

Supply and Fabrication of hoisting unit, providing new hoisting mechanism & screw rod, Erection and trial run etc. complete

OD25365/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD25364/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD25473/2022-2023:Supply of G.I pipes 40 mm dia

OD24689/2022-2023:Fabrication of Structural steel Hoisting platform and accessories etc. as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD24693/2022-2023:Erection of the Hoisting Platform and accessories including hand rails , ladder etc. for the same including alignment correction, setting, fixing etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc. complete as per direction of departmental officer at site.

OD25315/2022-2023:Overhauling of hoisting mechanism including supply of new 3HP 970rpm electric motor and electrical accessories, alignment correction of rope pulley, lubricating all set of gears and pulleys, changing of transmission V belt (C83, Pitch length 2160mm) as per sample at site all including cost of materials, labour, conveyance charges, all lead and lift etc complete.

OD25183/2022-2023:Supply of 16mm dia G.I wire rope.

OD25188/2022-2023:Conveying and fixing already supplied wire rope, supply and applying wire rope compound on it, supply and fixing of wire rope clamp, D- Shackle, etc. and conducting trial run including cost of all material, labour charge, conveyance charge etc complete.

Excellent

GEO THOMAS

JOBIN JOSEPH

Bidder Name

GEO THOMAS

SAI ENGINEERING

JOBIN JOSEPH

Excellent