MVIPPainting of the exposed surface of main radial shuttersRBMC and LBMC main and emergency shuttersSluice shutters etc and the connected works of Malankara dam

Amount

Painting all the exposed surface of RBMC & LBMC main and Emergency shutters,Emergency Sluice etc.Catwalk with supporting structures,ladder,Covers etc.panel boxes,lamp posts etc.,operating platform,hand rails etc.

od1201/2021_2022/MH : :Dismantling of the Canal Shutter (Upto 2 Tonne weight )/ Hoisting unit/ Embeddedparts etc of the same and stacking at a distance of 100 meter including hire of machinery , labour etc .complete as directed by the departmental officer at site (weight of the unserviceable shutters and embeddedparts may be calculated as 60% and unserviceable hoisting units as 80 % )Rate analysis of 10 Qtl

od21158/2021_2022/MH : Dismantling of the sluice gate and stacking at a distance of 100 meter including hire of machinery , labour etc . complete as directed by the departmental officer at site.

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od1207/2021_2022/MH : Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platformincluding hand rails , lader etc. for the same including . alignment correcting and settingcomplete including cost of all labour, machinery, incidental and conveyance , lead and liftcharges etc complete but excluding cost of materials already supplied

85.111 : Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Painting all the exposed surface of Main radial shutters,

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Replacement of damaged rubber seals of Spillway radial shutter of Malankara Dam if neccessory

85.106 : Supply of MS flats including cost of conveyance charges

od1274/2021_2022/MH : Dismantling the existing damaged rubber seals of radial shutters (bottom & sides) ,seal pads, etc. asper the directions of deptl officer at site including cost of scaffoldings,labour,hire of tool & machinery etc.complete.

od1275/2021_2022/MH : :Fabrication and supply of Seal clamps to spillway radial shutters as per approvedspecifications and directions of deptl officer at site including cost of labour, machinery, all leads and lifts,incidental and handling charges etc complete but excluding cost of material already suppliedRate analysis for 9.6qtl fabrication

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Southern Dredging Company Private Limited

ASHIFUL HAK.C

Bidder Name

Southern Dredging Company Private Limited

Pradeep Prabhkaran Nair

ASHIFUL HAK.C