Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC 461 7 WATER WORKS RO AD MONIRAMPORE BKP | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | ₹2.9 L | L1 | Accepted-AOC LOWEST |
| 2 | L2₹2.9 LRejected-AOC 1153 SOUTH DHADKA BYPASS ROAD ASANSOL BARDHAMAN WEST BENGAL 713302 UDYAM WB 23 0002585 | PASCHIM BARDHAMAN | WEST BENGAL | 713302 | ₹2.9 L | L2 | Rejected-AOC MORE THAN L1 |
| 3 | L3₹3.0 LRejected-Finance | ₹3.0 L | L3 | Rejected-Finance MORE THAN L1 |
Tender Value
Refer Docs
EMD Value
₹6,000
Closing Date
17 Jan 2026, 5:00 pmClosed
Dy. C.E. (M) (S AND D) KMC
Office of the Dy.CE(M). (Sewerage and Drainage), SEWARAGE and DRAINAGE department Kolkata Municipal Corporation 5, S.N. Banerjee Road Kolkata-700 013
Manufacturing, supply and fitting-fixing of M.S. delivery bend of 55 cusec capacity pump unit no.10 with its allied works at Ultadanga drainage pumping station.
2025_KMC_979237_1
KMC/S_D/UDPS/DB10/25-26
Open Tender
MECHANICAL
10 days
DLPS/UDPS
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹6,000
20 Feb 2026
26 Dec 2025
19 Jan 2026
26 Dec 2025
17 Jan 2026
26 Dec 2025
TOTAL
Item Rate BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Disconnect the electric line from the motor & keep the cable by covering with protective device.
Decoupled the motor side coupling & open out the motor from its own position including dismantling the motor base plate & pedestal from its own position & keep it safe side. as per direction eic.
Construction of scaffolding with bambo poles, wooden planks, coir rope etc. suitable for working area.
Dismantling the damaged bend pipe and opened out from its own position by necessary tools and tackles.
Supply of M.S. Plate for manufacturing delivery bend as per specification and sample with the instruction of EIC.
Pipe bending
Cutting to requisite length or shape departmental r.s. joists,channels, angles, tees, plates etc.
Welding in M.S. structural work with gas or electric ( a ) tack weld.
Welding in m.s. structural work with gas or electric ( b ) continuous weld.
Making M.S flange of dia OD-900 mm ID-780 mm and thickness 31 mm.
Supply, fitting, fixing of M-16 x 100 mm long high tension special type of studs with nuts and washers.
Painting on steel or other metal surface with synthetic epoxy paint of approved quality including smoothening surfaces by sand papering etc. (Two Coats)
Lowering the newly fabricated delivery bend pipe and fitting fixing the same in proper position and alignment using necessary tools and tackles by providing temporary support, as required, gaskets, nuts, bolts etc. all complete as per direction of Engineer In Charge.
Commissioning the motor on the pedestal & couple the motor side coupling & pump side coupling, connect the electric line & trial run with unload & load.
Transportation cost including loading and unloading.
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_2386840.xls
BOQ • 0.37 MB
FORM.pdf
Tender Documents • 0.64 MB
Download all tender documents and submit your bid
