NIT No. 25 Item No. 6 (22-23) EE (T)/ACE

Supply of Non-Clog Centrifugal Sewage Water Pump with 15 H.P. squirrel cage induction motor including base plate, coupling and guard. Discharge of pump: - 240 m³/hr. and head-08 meters, 125 X 100 MM, With CI Impeller, EN-8 Shaft & Gland Packed Coupled with Electric Motor 15 HP, 1450 Rpm TEFC, IE2, 415 V, 3PH50 HZ, Foot Mounted, Mounted on Common Base frame, Flexible Coupling & Coupling Guard. Make: - KBL, KEC, ABB and any approved of D.J.B.

Dismantling of existing pump set along with allied accessories also breaking of existing RCC foundation with help of pneumatic hammer machine and Gas Cutter, welding also with help of manual labour etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:3:6(1Cement:3coarse sand (zone III):6 grade destones aggregate 20mm nominal size). Item Code DSR (Civil) 2021, 4.1.5

Fixing of new base frame along with the suitable size of SS foundation bolts in the CC foundation. The job also includes fixing of Pump & motor on the base frame dully fitted with the tyre coupling and doing proper alignment of the motor & pump.

Supply of M.S. pipe 100 mm made out of 8 mm thick M.S. plate i/c welding, cutting, painting both Approved side with black anticorrosive bituminous paint of approved brand and tested to a head of Rate 15 kg/sqm conforming to IS 3589/1981, IS 7322-1974, IS 784-1978 and relevant codes i/c cost of plate and carriage at site complete as directed by Engineer-in-Charge. DJB S.O.R.

Supply of 100 mm dia. bends made out from 8 mm thick MS Sheet, dully welded and having flanges with holes on both sides

Supply of 100 mm dia NRV PN 1.0. Make :- Kirloskar / IVC / Other DJB Approved make

Supply Non rising Sluice valve of size 100 mm, PN 1.0 Make: - Kirloskar / IVC / Other DJB Approved make

Supply of 8 mm thick MS Flanges for 100 mm dia. MS Pipe. Make ISI

Supply of M.S Nut bolts washer. D.J.B. S.O.R: Item Code1034

Rubber insertions for 100 mm dia. pipe joints DSR 2018: Item Code1376

Supply & fixing of foundation bolts as required

Supply& fixing of anti-vibration mounting pads as required.

S/F of MCCB 415V, three pole 3phase, high breaking capacity 50KA 50Hz, rating-250Amp. Make: L&T

Supply of semi-automatic star-delta starter in SS enclosure, output voltage: - 415 Volts, three phase for 15 H.P. pump set. Make: - L&T, C&S, BCH, Havells and any approved make of DJB

Supply of on load manual change over switch 200 Amp., four pole in sheet steel enclosure type. Make: - L&T/Havells and any approved make by DJB

Supply of 4 core 50 Sq. mm armoured aluminium conductor PVC insulated and PVC sheathed/XLPE cable 1.1 KV conforming to IS 1554/1/88 with latest amendment. Make: - Fort Gloster /ICL /ICC /Universal /CCI /Grandly /Any DJB approved Make

Supply of 3 C x 10 sq. mm PVC insulated and FR PVC round sheathed, copper conductor(flexible). Make: Grandlay / Polycab / Gloster / Havells

Fixing of the above item in the pump house as per the requirement with the help of labour, Gas Cutter, Welding and Tripod etc

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. DJB SOR

Providing and fixing earth bus of 25 mm X 5 mm G.I. strip on surface for connections etc. as required. DJB SOR

Providing of the insulating met for safety of the operational staff. Size 1x2 mtr., thickness-10mm. DJB SOR Make: Jyoti / National

Testing and commission of complete work in the presence of Engineer-in-charge with full satisfaction

MK ENGG.CO.

Raj Engineering Co.

HYDROCON ENGINEERS

SANJAY SALES CORPORATION