Electrification - to the Installation of 26 Passenger Elevator near cath lab attched to District Hospital, Palakkad

Amount

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A,3 plate ceiling rose - Short point (90.2.1.1 )

Independent Plug - Short Point ( 90.2.1.7 )

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire and making good the surface as required.(od15213/ 2019_ 2020)

Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.20.3)

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire and giving connection etc. as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.22.3)

Supply and installation of sheet steel, phosphatised and painted,dust and vermin proof enclosure of MCB DB including copper /brass bus bar,neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc.as required. 4way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) (90.11.1.14)

Do - single pole and neutral,sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator,8way Double door.(2.3.2)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. 40 amps. (2.13.1)

Do -,double pole,240volts, isolator - Do - etc.as required.40 amps. (2.12.1)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc.as required. 25 A. rating, 4 pole RCCB, 30 mA (2.15)

Do - double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (2.14.1 )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole. (2.10.4)

Do - 5 amps to 32 amps rating - Do - Single pole (2.10.1 )

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required.

4core 16 sq mmwith factory made clamp.(90.12.7.41)

2 core 6 sq mm with factory made clamp.(90.12.7.2)

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.

4core 16 sq mm.(90.12.5.41)

2core 6 sq mm.(90.12.5.2)

Supply and making end termination with brass compression gland with earth clips and aluminium lug socket for 4 core 16sqmm (28mm) PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.(9.1.33)

2 X 6 sq. mm (19mm) (9.1.1)

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench.50/38 mm or nearest size. ( 90.12.9.2)

Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required. 2.00mm copper conductor (14SWG) (od14862/2019_2020)

Do - 2.65mm copper conductor (12 SWG) (od21802/2019 _2020)

Do - 3.15 mm copper conductor (10 SWG) (od14864/ 2019_2020)

Supply of superior quality 2.00mm copper earth socket and including crimping etc.as required. (od14945/2019_2020)

Do - 2.65mm copper conductor (12 SWG) (od21880/2019_2020)

Do - 3.15mm copper earth socket and including crimping etc. as required. (od21884/2019_2020)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Do - 25 x 3 mm brass bolt & nut. (od21886/2019_ 2020)

Dismantling the 240sqmm APVC cable, gland etc. without any damages from the existing position and refixing the same in the new panel board board and giving necessary connection including all charges.

Dismantling the existing cubicle panel board without any damages from the existing position and conveying the same to store concerned including all charges.

Dismantling the 200A TPN SFU from the the existing cubicle panel board without any damages and refixing the same in the new panel board board using required additional materials and giving necessary connection including all charges.

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet,powder coated (excluding base frame) (90.14.1.1)

Supply and providing 2mm thick SMC sheet as shrouding for bus interconnection/terminations etc. including required nut & bolt etc. (90.14.2.1)

Supply and providing heavy duty 'A' section neoprene gasket in the panel board 'A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1)

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board.(90.14.5)

Supply and providing copper earth bus in the panel board.(90.14.7)

Do - Spredar/terminal adapter kit extended terminal for 3/4 pole TP&N disconnector fuse switch unit. (8 Pcs)

Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.1.50 sq mm single run with required sockets.

LED indicators for all voltage ranges - Blue Colour.

LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour.

Sanju Rajan

Bidder Name

Mohammed Rafik

Sanju Rajan