PROVISION OF CERTAIN E/M WORKS AT AFS BIDAR.

Amount

S&F Metal plug Nato socket with MCB three phase 5 pin 63 amps complete all as specified and as directed.

Sub main wiring with 4 runs of 10 sqmm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor drawn through and including suitable size of ERW steel conduit pipe and accessories and one run of 10 sqmm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor for earth continuity complete all as specified and as directed.

Sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor, drawn through and including suitable size of heavy duty PVC conduit pipe and accessories and one run of single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor for earth continuity , concealed in surface / walls / floors / ceilings/ roofs etc.,including cutting grooves and chases and finished the surface with existing surface complete all as specified and as directed.

Sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor drawn through and including suitable size of ERW steel conduit pipe and accessories and one run of single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor for earth continuity complete all as specified and as directed. Note for Sl item No. 2,3&4 : 4/2 /2 runs 10 / 4 / 6 sqmm single core copper conductor, 1 run of 10 / 4 /6 sqmm copper conductor earth wire and conduit and its accessories will be measured as one unit

Supply & Lay in trenches, fixing or passing through pole, fixed to wall / pole of 70 Sqmm 3.5 core XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty LT under ground cable 1100 volts grade with stranded aluminium conductor including providing lugs as required and connection, testing complete all as specified and as directed.

S & F MCCB DB TPN 8 way with 200 amps copper rated bus bar with mild steel sheet enclosure, vertical, double door suitable for fixing MCCB's and MCB's including connecting complete all as specified and as directed.

S & F MCCB with thermal magnetic release conforms to IS / IEC: 60947-2 , 4 pole, 415 V, 125 A, 50 Hz , breaking capacity 35 KA complete all as specified and as directed.

S & F MCB DB SPN 8 way with 200 amps copper rated bus bar with mild steel sheet enclosure, vertical, double door suitable for fixing MCB's including connecting complete all as specified and as directed.

S & F MCB TP 25 to 63 Amps, 10 KA, 'B' curve complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB SPN 63 Amps, 10 KA, 'C' curve complete all as specified and as directed.

Chemical earthing (maintenance free) using corrosion resistant earth electrode copper cladded, copper coating thickness of 250 microns, 17.20 mm dia, high tensile low carbon COPPER BONDED RODS WITH 99.9% with 25KA current discharge test from CPRI of length 3.0m as per UL 467, with suitable compressive coupler planted at depth not less than 4.6m of bore 100mm belwo gorund level and duly covered with low resistant superior conductive powdered non corrosive, highly hydrous earth enhancing material all as directed including connecting upto common bus bar grid of size 25 x 3 mm to achieve optimum low earth resistance on inspection/ testing complete all as specified and as directed. Notes:- (a) The make shall be of manufactures as listed in particuler specification here-in-after. (b) The earthing shall comply to IS-3043 and the earth resistance shall be less than 1 ohm (c) The electrode shall carry UL marking and amanufacturer's name (d) The quoted rate shall also deemed to be included the following:- (i) Survey of earth resistance if required for testing of the earth shall be carried out along with departmental representative. (ii) The Grid point/ testing point shall be of 25 x 6mm copper bus bar of length 150mm mounted on porcelain insulators and enclosed in suitable enclosure of mild steel 2mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. (iii) The carbon based earth enhancement compound shall have very minimum resistance value (less than 0.12 Ohm) to keep the earth resistance at the lower level. The compound shall be filled with highly conductive and eco friendly ground enhancing compound as per IEC 62561-7 shall not be less that 30KG per pit. (iv) Testing of earth shall be carried out alongwith the departmental representive and report shall be submitted. (v) The exothermic connection of 22x6x150mm bus bar to 35 Sqm single core copper cabole PVC insulated for interconnection of earthing to equipment. Quoted tate shall deemed to include the cost of copper cable 35 Sqm upto 7.5 Mtr with 15mm light grade GI protection pipe. (vi) Earth work such as auguring and making good the surrouding area shall carried out in any type of soil. The bore hole shall be not less than 80mm dia and 4.60m deep from gropund level. (vii) Earth pit chamber shall be of HDPE and earth inspection cover made of high grade polypropylene of top dia 308mm, bottom dia not less than 308mm and height not less than 214mm with PVC cap. (viii) Earth termination clamps shall be provided to facilitate connection to equipments.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20 Amps 240 V complete all as specified and as directed.

Supply, install, connect, test and commissioning of inverter type Air conditioner Hi wall comprising of units Indoor & outdoor complete with cordless remote control unit, within built in air ioniser, Plasma filter for better indoor air quality, leakage detector etc with minimum 5 star rating and EER 3.2 of capacity 1.5 TR, inclusive of suction and discharge lines of suitable size and length of copper tube, necessary brazing and providing nitrile tubing over gas circulating copper tubes and neatly tying the ends with PVC insulating tape and mounting on suitable bracket, suitable drain pipe for disposal of waste water upto ground level and testing, neatly finishing the disturbed surfaces of walls to match with the surroundings complete all as directed.

Supply, install, connect, test and commissioning of flame proof / weather proof with fire retardant paint split unit indoor and out door complete with cordless remote control unit with in built in air ioniser, Plasma filter for better indoor air quality, leakage detector etc.,of energy efficient rating of capacity 2.0 ton with Eco friendly refrigerant R-32/407/410 A and necessary fixing arrangements for indoor / outdoor such as outdoor stand copper pipe leak detection and rectification after installation and should compliance to CIMFR specifications complete all as specified and as directed.

Supply, install, connect, test and commissioning of voltage stabilizer of 4.0 KVA capacity for automatic operation, single phase naturally air cooled, indoor type & designed for input variation between 170V to 260V with output volatge stabilized at 230V with accuracy of ± 2.5% with high& low voltage cut out & time delay including electric connection complete all as specified and as directed.

Supply, install, connect, test and commissioning of flame proof voltage stabilizer of 4.0 KVA capacity for automatic operation, single phase naturally air cooled, indoor type & designed for input variation between 170V to 260V with output volatge stabilized at 230V with accuracy of ± 2.5% with high& low voltage cut out & time delay including electric connection complete all as specified and as directed.

Point wiring with 2 runs of 1.5 sqmm PVC insulated, unsheathed FRLS cable 1100 volts grade, multistranded copper conductor passing through and including suitable size of stove enamelled steel conduit with all accessories, on wall/ ceilings duly earthed with 1 run of 1.5 sqmm PVC insulated, unsheathed FRLS cable 1100 volts grade, multistranded copper conductor for one light point controlled by one switch complete all as specified and directed

Flame proof LED light fitting 1X40 watt , CMRI certified recommended for gas / vapor group of II A & III B, Zone 1&2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures, driver, holders, connector etc., with all accessories prewired including connecting up with three core flexible copper conductor cable complete all as specified and directed

Flame proof -WP rotary switch with termination box in LM6, 16 Amps, single pole 250V complete all as specified and as directed.

Supply, install, test and commissioning of Scissor lift of 500 Kg load capacity ,input supply 440 V AC, electric motor 1.5KW 380 V/2.2KW 220V, control valve of make ABB, Hydraulic pump of V-tech make, control panel at bottom with structural members of rectangular MS box of size 120X40X4 conform to IS2062, 02 nos of piston used with safety feature is P. failure protection, lock / Jack arrangements with hand rails complete all as specified and as directed with following specification :- (i) Floor height - 11 mtr, (ii) Railing height - 11 mtr (iii) Working height - 13 mtr with minimum height 2 mtr, (iv) platform size - 2450X1300mm , (v) HTFL (with rail )- 2400mm , (vi) HT folded - 1400mm, (vii) Ground clearance - 150mm (viii) Platform size - 2450mm*1300mm (ix) Hydraulic oil - Hyspin -68 (x) Total weight - 2000 kg (xi) Max load on wheels - 1550 Kg (xii) Tyres - Pneumatic (xiii) PU wheels -5-8D250X90 Make :- VEDANT LIFT / SHREE BALAAD HANDLING WORK

Point wiring with 2 runs of 1.5 sqmm PVC insulated, unsheathed FRLS cable 1100 volts grade, multistranded copper conductor drawn in and including suitable size of PVC conduit with accessories concealed in wall/roof etc. and including provision of one run of PVC insulated 1.5 sqmm copper conductor for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top of housing the switches, fan regulator, socket, outlets etc for for 5 Amp switch socket on independent board complete all as specified and as directed.

All as per item No 22.00 here-in-before but size of cable 2.5 sqmm for 15 Amp switch socket with earth wire 2.5 sqmm PVC insulated multistranded copper conductor cable complete all as specified and as directed.

Switch socket combination 2 in 1, 5 Amp, flush type, 230 V complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin 5 Amps and 15 Amps , flush type universal, 230 V complete all as specified and as directed.

Supply and assembling / fixing suction sweeper machine 4 HP / 3 KW wuth strainer basket including pump body, pump foot and diffuser in glass loaded polyproplyene, motor housing in aluminimum L-2521, shaft available in stainless steel AISI 420 mtr impeller and sealed mounting in PPO also motor having class 'F' insulation , Asynchronomus , two pole, continous operation, IP-55 protection complete all as specified and as directed. Note :- (i) The cost of base and trolley wheels, starter , starter box included in the rate quoted . (ii) The rate quoted also including provision of Flexible pipe of 70 mtr to coneect the suction machine inlet and outlet. Make :- D S WATER TECHNOLOGY / ANANYA CREATION LIMITED ( ACL)

S &F 6 Sqmm 3.0 core XLPE insulated un armoured electric power cable heavy duty LT under ground cable 1100 volts grade with stranded copper conductor including providing lugs as required and connection, testing complete all as specified and as directed.

GOWRIPRIYA ENTERPRISES

Umesh V Patil Contractor

Srinivash Engineers