CONSTRUCTION OF RETAINING WALL AT 59 WEU AND SPECIAL REPAIR TO BLDG NO T-29 AT STN HQ RAJOURI GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete in foundation filling and mass concrete type D-2 1:4:8 (40mm graded stone Aggregate) in foundation, complete all as specified and directed.

M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cm 1:6 , complete all as specified and directed.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface on sand stone n.exc 40mm for lime or sand stone, complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work if required, complete all as specified and directed.

M & L for raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in Cement Mortar 1:4, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20mm graded crushed stone Agg as in bond stone in stone walling set in CM 1:6, complete all as specified and directed.

M&L for broken stone or boulders hand packing (any thickness) at back of wall over arches etc and raising (or lowering) to the reqd level, complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm for soil, complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length as in weep holes, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4, including dismantling old unserviceable of tiles, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3 including dismantling old unserviceable tiles, complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floor and paving not exc 15cm thickness below or above ground level, complete all as specified and directed.

Taking up or down 15mm bore GI tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Taking up or down 20mm bore GI tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings including cutting chases for water tubing or concealed & making good with cement mortar (1:4), cutting not exc. 10cm girth in brick walls, complete all as specified and directed.

Fixing only 15mm bore GI tubing medium grade galvanised steel tubing with all fittings fixed to wall including cutting chases for water tubing or concealed, etc and making good to facings where required and plastering in cement morter 1:4 cutting not exc. 10cm girth in brick walls, complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20mm bore GI tubing, complete all as specified and directed.

Fixing only 20mm bore GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors, complete all as specified and directed.

S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps, complete all as specified and directed.

S&F in repair PVC SWR pipes 110 mm bore, soil, waste and vent pipes single socketed in any length with rubber ring joint fixed to or laid in trenches or in walls with steel clamps, complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius, complete all as specified and directed.

S&F in repair viterous china wash down water closet pan (pedestal pattern) white (exclusive flushing cistern, flush pipe, complete all as specified and directed.

S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe including trap set in concrete and removing debries from site, complete all as specified and directed.

S&F in repair for vitreous China white bowl type urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe with grating and union for discharge pipe including connecting to wate pipe, complete all as specified and directed.

S&F in repair viterous China pedestal wash basin, white flat back, including excluding tapse, waste chain and plug and porcealan stopper brackets but including brackets, complete all as specified and directed.

S&F in repair of CP brass WHB mixers for hot and cold water mixing of 15mm dia screwed down for iron pipe, complete all as speicified and directed.

S&F in repair 15mm CP brass health faucet (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.

S&F in repair of copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and including cover plate, complete all as speicified and directed.

S&F in repair for 15mm bore brass chromium plated shower rose of size 125mm with swivel joints fixing to steel pipes etc, complete all as specified and directed.

S&F in repair for PVC waste pipe 600/900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S&F in repair for stainless steel soap dish holder, complete all as specified and directed.

S&F in repair for Glass conrner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specifed and directed.

S&F in repair for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, fixed with screws wooden / plastic cleats, complete all as specifed and directed.

S&F in repair for 15mm bore Stop valve (concealed type), chromium plated fancy type, cast copper alloy screwed down, high pressure with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed

S&F in repair for 15mm bore Angle valve, cast copper alloy, fancy type, chromium plated suitable for iron pipe and one end and PVC connector on other, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 15mm bia, complete all as specified and directed.

S&F in repair for gun metal globe or brass gate valve with iron wheel screwed both ends for iron pipe of 20mm bia, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed.

S&F in repair Soap dispenser with glass bottle, complete all as specifed and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specificaiton, complete all as specified and directed.

M&L for factory made solid PVC panel door shutter 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded, sealed to be stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.

S&F for extruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked), complete all as specified and directed.

S&F for extruded aluminium anodised barrel tower bolt of size 150 mm long (ISI marked), complete all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 , complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in sub base to receive tiles, including demolition of old concrete of any type, complete all as specified and directed.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound @3% by weight of cement on brick work or concrete surfaces and finished the surface even & smooth without using extra cement, complete all as specifed and directed. Note:- Cost of WPC shall be included in quoted rate)

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick or concrete surface of wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer, complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper on old wall surfaces including preparation of surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather proof paint of Apex Ultima of over and including a coat of alkali resistant primer, complete all as specified and directed.

M&L for 50mm thick plain cement concrete, type B-2, 1:2:4 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12, finished the surface even and fair without using extra cement with and including all necessary formwork to devide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and 3 parts of sand (all by weight), complete all as specified and directed

Sch 'A' Part-II (E/M works) Taking down U/S copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed, complete all as specified and directed.

M&L for point wiring for one light point/fan point/ one bell/buzzer point controlled by one switch with 1.5 Sqmm. PVC insulated FRLS unsheathed copper conductor two single core multi stand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green colour) as earth lead and including PVC conduit alongwith modular sunken boxes of required size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

Description all as per srl item No. 67 above but one 3 pin 5 Amp socket outlet on same board controlled by one 5 Amp switch.

Description all as per serial item No 67 above but for one 3 pin 15 amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper conductor cable with 2.5 sqmm single core multistranded FRLS copper cable as earthing lead.

S&F for modular switch piano flush type single pole one way 6 Amps 240 volts, complete all as specified and directed.

S&F for modular switch piano flush type single pole one way 16 Amps 240 volts, complete all as specified and directed.

S&F for modular socket outlet 2 in 1, 3 pin, 6 Amp flush type, complete all as specified and directed.

S&F for modular socket 6/16A, 6 pin, 2 module, ISI marked, 230 volts, complete all as specified and directed.

S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 63.5 x 17mm terminals, complete all as specified and directed.

M&L for LED Tube light fitting, 1x 20 watts, decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, premium 20W LED batten, connecting electrically to ceiling rose to fitting using PVC insulted and overall sheathed flexible copper conductor cable of size 0.75sqmm 3 core, including removing ol/unserviceable one, complete all as specified and directed.

S&F in replacement for LED light fitting mirror type with high out put diffuser 2 feet, 10watt, 220volt, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement for LED street light fitting, 1x 35 watts, 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

M&L in repair for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50 Hz, 250mm sweep having power input 70W, speed 1200RPM, with protective bird guard including connecting with three core, 0.75sqmm PVC insulated copper conductor cable, complete all as specified and directed.

M&L in replacement for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volt 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification including dismantling old/ unserviceable one, complete all as specified and directed. (Note:- MCBs will be measured and paid separately.)

M&L in replacement for MCB single pole & neutral, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables, complete all as specified and directed.

M&L in replacement for MCB single pole, 240 volts any rating from 5 to 32 Amps with rupting capacity 10KA, 'B' curve in the DB, including providing thimble for out going cables, testing and commissioning, complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25litre, BEE 5 Star rated, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Supply,laying, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts including removing old unserviceable cable complete all as specified and directed.

Supply and filling in and speading inwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and complete all as specified and directed. Note:- Punned thickness i.e. 18cm shall be measured for payment purpose.

M&L for brick work with sub class 'B' bricks, old size, laid dry flat over the cable butting each other length of cable equal to width of brick, complete all as specified and directed.

Supply and laying GI pipe 50mm bore light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc lain in trenches/ duct/culver/road crossing etc for protection of cables including removing old unserviceable pipe, complete all as specified and directed.

M&L in repair for earthing complete with galvanised steel earth plate electrode 600mm x 600 mm x 6mm thich buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI light grade pipe 15 mm bore for protection to the extend of 7.5mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20mm dia midium grade and MS funnel, including excavation and earth work and returning, filing, in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion, complete all as specified and directed.

M/S Ramesh Chander Gandotra & Sons (BID ID -3402416)

KANWAL KUMAR GUPTA (BID ID -3401715)

M/S MAHALUXMI BUILDERS (BID ID -3397657)

M/s Parvesh Gupta (BID ID -3408904)

MS AAMIR FAROOQ BHAT (BID ID -3401476)

M/S IMRAN MAJID (BID ID -3394756)

NATIONAL TRADING COMPANY (BID ID -3409243)