WBIW/EE/MDD/e-NIT-16(e)/ 2025-26/S19

Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. Note : Diameter of pile to be measured at a distance of 1.5m from the thicker end. i) 17.5 cm. average dia.

ii) 15 cm. average dia.

Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. Note : Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. i) 17.5 cm. average dia.

ii) 15 cm. average dia.

Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. Width of thinner end above 15 cm. Jhaw / Eucalyptus.

Labour for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 M etc complete as per direction of Engineer - in - charge (the quantum should be corrected upto 3 decimel.)

Labour charges for old or new wood work including hoisting, fitting & fixing including supplying new nails and screws wherever necessary etc. complete as per the direction of the Engineer-in-charge. (the quantum should be corrected upto 3 decimels)

Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels). Hard Wood (Mahua / Arjun / Tentul etc or similar quality hard wood as approved by the Engineer-in-charge.

Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc. complete as per the direction of the Engineer-in-charge.

Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge. Two Coat

Taking out Jhaw/Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard. Up to 17.5 cm. diameter

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface : With super gloss (hi-gloss) Two coats (with any shade except white)

Supplying, dressing and stacking at site bamboo pins above 5 c.m. diameter. and upto 7.5 cm. diameter. (dia. to be measured at mid length).

Driving bamboo pins in standing or flowing water including scaffolding and driving appliances. Where boats are not necessary.

Supplying, fitting, fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 50 mm.)

Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg).

Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials). NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag.

Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge.

Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land, including loading, transporting, unloading and stacking with all lifts both ways and head load where necessary and depositing the same on embankments, cannels, filling depressions in requisite profile, leveling as per direction of the Engineer-in-charge within a lead of : Beyond 1.00 km and upto 2.00 km Note :- The rate is inclusive of Royalty Charges and Compensation for earth for land owned / arranged by the contractor. Royalty payment certificate in original from competent authority are to be produced along with the bill, otherwise amount due towards Royalty @ Rs. 29.00 / Cum & Cess @ Rs. 5.30 / Cum will be deducted from the bills of works. NB :- Measurement to be taken on the basis of stack measurement / pre-post work section measurement after deduction of void as per norms. No extra payment will be made for stacking.

Please Enable Macros to View BoQ information