PROVISION OF SOAKPITS AND SEPTIC TANKS ALONGWITH ASSOCIATED

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sq. M each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each, complete all as directed.

Resecuring or easing and adjusting shutters of any description exc 1 sq. m and n exc 2 sq. m each without taking down,complete all as directed.

Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work,complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as directed.

Dismantling timber scantlings,unframed work,40 sq. cm and over in section, in any position,complete all as directed.

Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings,complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,complete all as directed.

Dismantling stone slabs and tiles of any description or thickness,laid,bedded in any mortar, complete all as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories),complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 3.0 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (not exceeding 1.5 m in depth) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m,as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5 m but n exc 3.0 m in depth) including getting out in all kind of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5 m,as directed by Engineer-in-Charge.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Materials and Labour for sand filling under floors or in foundations including watering and consolidation,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in surface channels and drains,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for providing precast reinforced cement concrete (1:2:4) type B1 using 20 mm graded aggregate, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers,shelves and similar articles with plain faces and setting in mortar (1:4) complete with joints to match,all as specified and directed. Note:- Reinforcement will be measured and paid seperately.

Materials and Labour for providing precast reinforced cement concrete (1:2:4) type B1 using 20 mm graded aggregate, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers,shelves and similar articles with plain faces and setting in mortar (1:4) complete with joints to match including demolition of existing precast reinforced cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers,shelves and similar articles with plain faces,all as specified and directed. Note:- Reinforcement will be measured and paid seperately.

Materials and Labour for reinforced cement concrete (1:2:4) Type B1,using 20 mm graded aggregates in walls,retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses, complete all as specified and directed.

Materials and Labour for reinforced cement concrete (1:2:4) Type B1,using 20 mm graded aggregates in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like,complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6),complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),complete all as specified and directed.

Use and waste of form work to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter for rough finished surfaces of concrete, flat,complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;exceeding 200 mm thick (Horizontal or sloping) for rough finished surfaces of concrete, flat, complete all as specified and directed.

Materials and Labour for second class hard wood plain fillets,square,rectangular or triangular in section, bullnosed,splayed,chamfered or rounded on one edge or face,sectional area exceeding 6 but not exceeding 13 sq.cm,wrought,secured with screws,complete all as specified and directed.

Supply and Fix, second class hard wood plain fillets rectangular or triangular in section, clean sawn secured with nails, sectional area exc 13 Sqcm but n.exc 25 Sqcm including dismanteling existing timber rails, posts, rafters,purlins, etc. under 40 sq. cm in section,unframed,complete all as specified and directed.

Materials and Labour for second class hard wood in scantlings,clean sawn and fixed, complete all as specified and directed.

Materials and Labour for,second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Supply and Fix, 35 mm thick,second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8,clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed.

Supply and Fix,35 mm thick, second class hardwood rail and style,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces,the size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed.

Supply and Fix, 40 mm thick,flush shutters, solid core construction with particle board core and plywood face panels,commercial type covered with decorative face veneer with lipping/frame to match,on both sides,complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

Supply and Fix, Aluminium Alloy, anodised, sliding door bolt, length of bolt 300 mm,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and Fix, mild steel, 300 mm, ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix,aluminium handles,cast type,anodised, 100 mm size, complete all as specified and directed.

Supply and Fix,aluminium handles,cast type,anodised, 150 mm size, complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges,75 mm size,complete all as specified and directed

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix,hasp and staple,size 75 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and directed

Supply and Fix in repairs,Harrison rails,anodised aluminium alloy with fixing brackets,stops, rollers etc.,complete all as specified and directed.

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles,complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work ,complete all as specified and directed.

Materials and Labour for,rolled mild steel,Fe-410 W (Gde E-250) quality A, in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections),including distance pieces, cleats etc.,complete all as specified and directed.

Supply and Fix,pressed steel frames of size 105 mm x 60 mm pressed out of cold rolled mild steel sheets of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc.,complete all as specified and directed.

Supply and Fix,pressed steel frames of size 125 mm x 60 mm pressed out of cold rolled mild steel sheets of 1.25 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc.,complete all as specified and directed.

Material and Labour for pre-painted,galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for 0.63 mm thick plain, galvanised,mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,complete all as specified and directed.

Supply and Fix,anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc.,complete all as specified and directed.

Supply and Fix,anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed.

Materials and Labour for,anodised aluminium snap grid frame work for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness,complete all as specified and directed.

Materials and Labour for,4 mm thick, asbestos cement plain building boards, fixed to timber framework with screws in ceiling flat or sloping including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness,complete all as specified and directed.

Materials and Labour for,18/19mm mm thick,veneered particle boards interior grade, solid core, general purposes type,faced with decorative veneer on both faces,fixed with screws to timber frame work and including dismantling existing timber boarding of any description fixed in any position with screws,complete all as specified and directed.

Materials and Labour for, providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) including dismantling existing wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/blankets,any thickness,complete all as specified and directed.

Roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust, etc., brushing neat cement slurry with 3.0 kg of cement per sq. metre and providing 50 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement,complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding, complete all as specified and directed.

Materials and Labour for, bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight,10 mm wide and 50 mm depth as in joint filling for plinth protection,complete all as specified and directed.

Materials and Labour for 100 mm wide, Bitumen Based Flashing Tapes,cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side reinforced aluminum foil, fixed on surfaces to prevent leakages,fill cracks, joints for various surface like metal, cement, asbestos, fiber, plastic, vinyl etc, complete all as specified and as directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 350 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B IIa,in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M,on vertical surface of wall such as dados, skirting etc,,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed

Materials and Labour for,Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing stone slabs and tiles of any description or thickness, laid,bedded in any mortar,complete all as specified and directed.

Materials and Labour for,20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10 mm thick screed in cement mortar (1:3) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including dismantling existing stone slabs and tiles of any description or thickness, laid,bedded in any mortar,complete all as specified and directed.

Materials and Labour for,machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing stone slabs and tiles of any description or thickness, laid,bedded in any mortar,complete all as specified and directed.

Materials and Labour for,machine cut Kota stone slab 20-25 mm in raisers of steps, skirting, dado and pillar, laid over and including 10 mm thick screed bed of cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling existing stone slabs and tiles of any description or thickness, laid,bedded in any mortar, complete all as specified and directed.

Materials and Labour for,machine pressed precast concrete interlocking paver block with grey cement and pigment,any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surface in walls and finishing surface even and smooth without using extra cement,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:3) mixed with waterproofing compound as per manufacturer's instructions on concrete surface of sunken floors and finishing surface even and smooth without using extra cement,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:4) mixed with waterproofing compound as per manufacturer's instructions on on fair faces of brick work or concrete surface in walls and finishing surface even and smooth without using extra cement,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Materials and Labour for, 3 mm thick,sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane,complete all as specified and directed.

Material and Labour for, 4.00 mm thick sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane,complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on walls, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.

Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed.

Materials and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth,complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) on new or previously untreated steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for preparing surfaces of wood and wood based materials,new or old of any description and girth, not otherwise described and treated with two coats of creosote,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including provision of ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and including dismantling existing water tanks and removing to store, complete all as specified and directed.

Supply and Fix in repairs, bib tap, cast copper alloy,fancy type,chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs,stop valves,cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy,fancy type,chromium plated with long shank and cup (concealed type) screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix in repairs, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets, complete all as specified and directed.

Supply and Fix in repairs, vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat,closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix in repairs,PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

Supply and Fix, 75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls,complete all as specified and directed.

Supply and Fix, 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

Supply and Fix, 75 mm bore PVC (SWR) bends any radius,with access door, complete all as specified and directed.

Supply and Fix, 110 mm bore PVC (SWR) bends any radius,with access door, complete all as specified and directed.

Supply and Fix, 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal, with access door,complete all as specified and directed.

Supply and Fix, 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal, with access door,complete all as specified and directed.

Supply and Fix,110 mm bore PVC (SWR) reducers,complete all as specified and directed.

Materials and Labour for reinforced concrete pipes, 100 mm bore,Class NP3, laid and jointed,complete all as specified and directed.

Materials and Labour for reinforced concrete pipes, 150 mm bore,Class NP3, laid and jointed,complete all as specified and directed.

Materials and Labour for reinforced concrete pipes, 200 mm bore,Class NP3, laid and jointed,complete all as specified and directed.

Materials and Labour for concrete bed to drain pipes 100 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) complete all as specified and directed.

Materials and Labour for concrete bed to drain pipes 150 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) complete all as specified and directed.

Materials and Labour for concrete bed to drain pipes 200 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) complete all as specified and directed.

Materials and Labour for,cutting into existing manholes for connecting new drains, internal diameter of pipe 100 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

Materials and Labour for,cutting into existing manholes for connecting new drains, internal diameter of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

Materials and Labour for,cutting into existing manholes for connecting new drains,internal diameter of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

M/s Singh Furniture Mart

M/S R.B. Construction