Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAdmitted-Finance DOOR NO 68 2963 E3 MANDAKKARA ROAD AYYAPPANKAVU ERNAKULAM KERALA 682 018 | ERNAKULAM | ERNAKULAM | KERALA | 682018 | ₹4.6 L | L1 | Admitted-Finance |
| 2 | L2₹4.6 L+₹1,187.95 (0.26%)Admitted-Finance | ₹4.6 L+₹1,187.95 (0.26%) | L2 | Admitted-Finance |
| 3 | L3₹5.3 L+₹74,800 (16.3%)Admitted-Finance GROUND FLOOR WARD NO 07 ROOM NO 976 PATTIMATOM JN ERNAKULAM 683562 | ERNAKULAM | ERNAKULAM | KERALA | 683562 | ₹5.3 L+₹74,800 (16.3%) | L3 | Admitted-Finance |
| 4 | L4₹6.4 L+₹1.9 L (40.5%)Admitted-Finance | ₹6.4 L+₹1.9 L (40.5%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | K A ALIYAR L4 | A S ASSOCIATES L3 | ELAN ENGINEERS L1 | Bell Builders L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L Excavating holes more than 0.10 cum & upto 0.5 cum including getting out in all kind of soil, the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. complete all as specified and directed by Engr-in-Charge. For all kinds of soil | 1.5 | Cum | 1,500 ₹2,250 | 300 ₹450 | 50 ₹75 Lowest | 250.33 ₹375.5 |
| 2.00 | M&L Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources as in Foundation base, filling of post holes etc complete all as specified and directed by Engr-in-Charge. | 1.45 | Cum | 12,000 ₹17,400 | 11,400 ₹16,530 | 600 ₹870 Lowest | 6,500.3 ₹9,425.43 |
| 3.00 | M&L for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes complete all as specified and directed by Engr-in-Charge. | 700 | kg | 180 ₹1,26,000 | 160 ₹1,12,000 Lowest | 210 ₹1,47,000 | 162 ₹1,13,400 |
| 4.00 | M&L for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 30 | Sqm | 150 ₹4,500 | 176 ₹5,280 | 130 ₹3,900 | 80 ₹2,400 Lowest |
| 5.00 | M&L for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 40 | Sqm | 1,300 ₹52,000 | 980 ₹39,200 | 800 ₹32,000 Lowest | 1,212 ₹48,480 |
| 6.00 | M&L for Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | 14 | Sqm | 1,300 ₹18,200 | 900 ₹12,600 | 800 ₹11,200 Lowest | 900 ₹12,600 |
| 7.00 | Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) of specified grade ,75 mm thick, excluding the cost of centering and shuttering - All work up to plinth level :as in paving/ plinth protection laid in pannels , finished even and smooth without using extra cement | 1.5 | Cum | 12,000 ₹18,000 | 11,400 ₹17,100 | 8,000 ₹12,000 Lowest | 9,999.2 ₹14,998.8 |
| 8.00 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 coarse sand) | 3.15 | Cum | 10,000 ₹31,500 | 15,100 ₹47,565 | 8,000 ₹25,200 Lowest | 11,000 ₹34,650 |
| 9.00 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | 35 | Sqm | 450 ₹15,750 | 380 ₹13,300 | 250 ₹8,750 Lowest | 350 ₹12,250 |
| 10.00 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 35 | Sqm | 180 ₹6,300 | 180 ₹6,300 | 150 ₹5,250 Lowest | 220 ₹7,700 |
Tender Value
₹4.8 L
EMD Value
₹10,000
Closing Date
5 Sept 2026, 6:00 pmClosed
AGE I R AND D
AGE I R AND D KOCHI, THRIKKAKARA,KAKKANAD, KOCHI 682021
PROVISION OF COVERED SHED FOR DG SET IN TECHNICAL AREA AT UARF KULAMAVU UNDER NPOL KOCHI
2026_MES_782488_1
8427E8AGEIRDK
Open Tender
Civil Works - Others
Item Rate
120 days
KAKKANAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE I R AND D KOCHI
₹10,000
Yes
19 Sept 2026
3 Aug 2026
12 Sept 2026
3 Aug 2026
5 Sept 2026
17 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L Excavating holes more than 0.10 cum & upto 0.5 cum including getting out in all kind of soil, the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. complete all as specified and directed by Engr-in-Charge. For all kinds of soil | 1.5 | Cum | - | - |
| 2 | M&L Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources as in Foundation base, filling of post holes etc complete all as specified and directed by Engr-in-Charge. | 1.45 | Cum | - | - |
| 3 | M&L for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes complete all as specified and directed by Engr-in-Charge. | 700 | kg | - | - |
| 4 | M&L for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 30 | Sqm | - | - |
| 5 | M&L for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 40 | Sqm | - | - |
| 6 | M&L for Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | 14 | Sqm | - | - |
| 7 | Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) of specified grade ,75 mm thick, excluding the cost of centering and shuttering - All work up to plinth level :as in paving/ plinth protection laid in pannels , finished even and smooth without using extra cement | 1.5 | Cum | - | - |
| 8 | Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 coarse sand) | 3.15 | Cum | - | - |
| 9 | 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | 35 | Sqm | - | - |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 35 | Sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
8427TENDERDOCUMENTS.pdf
Tender Documents • 0.61 MB
BOQ_876652.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .