Supply and installation of IR Wireless

Amount

SITC of IR wireless microphone system with Infrared Emitter 1 Wavelength 870 nm, Frequency Response 100Hz – 12kHz Modulation Method Frequency modulation carrier Frequency Channel A: 3.100 MHz/Channel B: 3.350 MHz

SITC of headset microphone of cardioid pick-up pattern, featuring a lightweight design with an adjustable band,Unidirectional 2 Electret condenser Microphone , Sensitivity -66 dB ±3 dB (0 dB = 1 V/0.1 Pa, 1 kHz), Maximum Input Level 120 dB SPL,1.3 Mtr Cable and 3.5 mm monaural plug

SITC of 2-channel infrared wireless tuner, Channel A: 3.100 MHz Channel B: 3.350 MHz, Signal to Noise Ratio 61 dB or more, Tone 3 Squelch Frequency 32.768 kHz, Infrared Receiver Input 75 Ω, BNC jack × 2 Frequency Response 100 Hz - 12 kHz

SITC of Infrared Wireless Receiver Wavelength 870 nm, Carrier 4 Frequency Channel A: 3.100 MHz, Channel B: 3.350 MHz, Connection Terminal 75 Ω, BNC jack

SITC of battery charger for the Infrared Wireless Microphones. It 5 employs a quick charging system for nickel metal hydride (Ni-MH) batteries, allowing up to 2 infrared wireless microphones to be fully charged within 3 hours.

SITC of Rechargeable NiMH Battery to use with Microphone. One set set containing 2 nos with 2300 mah minimum

Supply and laying of 75 Ohm low loss subminiature Coax cable 23 AWG solid bare copper conductor through the pvc conduit/ chanel, foam HDPE core, Duofoil, +95% tinned copper braid, PVC jacket, nominal Capacitance 16.3 pF/ft, Nominal Inductance 0.107 µH/ft Preferred Brand: Belden 1855A or equivalent

SITC of BNC Intrconnect and accessories to crimp with Coax Cable , minimum contact resistance ≤ 3 mΩ (inner), minimum contact resistance ≤ 2 mΩ (outer)

SITC Intrconnect cables and accessories to connect with existing PA system

CROWNFAB

Systronics (India) Ltd , Telerad Division