General CSIND providing roofing and allied improvements to new boat jetty at Vaikom General civil work

Amount

MAINTENANCE OF NEW BOAT JETTY

15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

OD31886/2025-2026:Demolishing tile work in floors laid in cement mortar for thickness of tiles 10 mm to 25 mm including lead up to 50 m

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

OD31893/2025-2026:Demolishing brick work manually / by mechanical means including disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In lime mortar

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below

15.6:Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B work.

60.7.3:DISMANTLING DR - Dismanling , clearing away and carefully stacking materials useful for reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150m.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

60.7.2:DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

60.7.8:DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

60.6.1:Laterite Masonry - Laterite masonry using neatly dressed stones of size 44cmx24cmx14cm in CM 1:6 including all cost of conveyance and labour charges etc. complete.

6.2.1:Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.20:Providing and fixing bolts including nuts and washers complete.

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2

9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.5.1.1:Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge. Second class teak wood35 mm thick shutters

9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

OD31400/2025-2026:Providing and Fixing GI chicken wire mesh 24 gauge & 12 mm meshand 300 mm width for construction joints and chasing in brickwork for electrical conduits or water supply pipes including cementslurry and pegs/nails with nailing machine as required beforeplastering etc. complete

13.8.2:15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)

11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge.

60.6:PVC WEEP HOLES- Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials, conveyance, labour charges etc. complete.

13.37.1:White washing with lime to give an even shade:New work (three or more coats)

13.48.2:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

13.51.2:Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:Two coats

9.72.1:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:125x85x5.5 mm (heavy type)

9.72.5:Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:75x65x4 mm (heavy type)

9.74.2:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mm

14.35.3:Providing and fixing finished brass hard drawn hooks and eyes:200 mm

14.35.5:Providing and fixing finished brass hard drawn hooks and eyes:100 mm

50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2

50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow

50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow

50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.11:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling

50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow

50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

OD31333/2025-2026:Earth rod copper bonded 2 feet , as per the direction of departmental officers at site

OD31334/2025-2026:Earthing compound , as per the direction of departmental officers at site

OD31335/2025-2026:Copper 12wg wire for earthing , as per the direction of departmental officers at site

OD31338/2025-2026:Supplying and conveyance 20 mm GI saddle, as required at site.

OD31339/2025-2026:Supplying and conveyance 250 mm cable tie , as required at site.

OD31340/2025-2026:Supplying and conveyance 25 mm SS star screw , as required at site.

OD31341/2025-2026:Supplying and conveyance 6 mm grip/screw plug, as required at site.

OD31342/2025-2026:Supplying and conveyance insulation tape, as required at site.

OD31343/2025-2026:Supplying and conveyance 10 A 1 way switch E class, as required at site.

OD31344/2025-2026:Supplying and conveyance 6 A 3 pin socket Hi class, as required at site.

OD31345/2025-2026:Supplying and conveyance Anchor fuse unit 16-415A , as required at site.

OD31346/2025-2026:Supplying and conveyance ISI marked 6 A MCB L&T, as required at site.

OD31347/2025-2026:Supplying and conveyance ISI marked 16 A MCB L&T, as required at site.

OD31348/2025-2026:Supplying and conveyance ISI marked 2 pole ELCB 40A 30MA, as required at site.

OD31349/2025-2026:Supplying and conveyance ISI marked 2 pole Isolatar 40 A, as required at site.

OD31350/2025-2026:Supplying and conveyance 1 sq mm ISI marked wire, as required at site.

OD31351/2025-2026:Supplying and conveyance 1.5 sq mm ISI marked wire, as required at site.

OD31352/2025-2026:Supplying and conveyance 4 sq mm ISI marked wire, as required at site.

OD31353/2025-2026:Supplying and conveyance 8 mm modular type open box with cover plate, as required at site.

OD31354/2025-2026:Supplying and conveyance powder coated Meter box, as required at site.

OD31355/2025-2026:Supplying and conveyance 12 way double door powder coated DB, as required at site.

OD31356/2025-2026:Supplying and conveyance 20 mm ISI medium type PVC 3 way junction box

OD31357/2025-2026:Supplying and conveyance 20 mm ISI medium type PVC 2 way junction box

OD31358/2025-2026:Supplying and conveyance 20 mm medium type PVC bend

OD31359/2025-2026:Supplyng and conveyance 20 mm medium type PVC pipe for wiring

OD31336/2025-2026:Engaging labour charges of electricians for fixing supplied electrical accessories as per the direction of department officers at site

OD31337/2025-2026:Engaging labour charges for electrical works

OD31332/2025-2026:KSEB connection charges, as per the direction of departmental officers at site

OD31331/2025-2026:Name board of size 75 x 60 C. installed in the appropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc. complete as per the direction of departmental officers at site.

DESILTATION OF VEMBANAD LAKE

OD30864/2025-2026:Earthwork in under water excavation for removal of silt and debris including water weeds from Vembanadu Kayal in Vaikom municipality by mechanical means using sophisticated equipments like amphibian excavators or any equivalent mechanical equipments with necessary accessories like transport barges, mechanised boats etc as appropriate and as directed, to the desired depth to ensure free flow in river including getting out with lead upto 50m and lift upto 3 m etc complete, and conveying the excavated materials like silt, earth, water hyacinth, water weeds, grass etc obtained from time to time and disposing yard of Vaikom Municipality (avg distance 3km) by lorry or any other suitable means including charges of labour, equipments, loading from site and unloading at dumping yard.

K N SASIDHARAN (BID ID -2400238)

Bidder Name

RAJEEV P P

K N SASIDHARAN