Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC ACTIING STAMP VENDOR VALAVANNUR | L1 | Accepted-AOC accepted | |
| 2 | L2₹3.9 L+₹12,920 (3.45%)Rejected-AOC ACTING STAMP VENDOR VALAVANNUR KERALA | L2 | Rejected-AOC rejected |
| Sl No | Description | Qty | Unit | SURANDRAN R L1 | Abdul Nazer T L2 |
|---|---|---|---|---|---|
| 1.00maintenance work | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 138.6 | kg | 530 ₹73,458 Lowest | 540 ₹74,844 |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 21.53 | sqm | 1,150 ₹24,762.95 Lowest | 1,166 ₹25,107.48 |
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 0.71 | cum | 6,900 ₹4,912.8 Lowest | 6,900 ₹4,912.8 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 139.98 | sqm | 336 ₹47,033.28 Lowest | 336 ₹47,033.28 Lowest |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 75.78 | sqm | 74 ₹5,607.72 Lowest | 77 ₹5,835.06 |
| 1.01 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1,346.17 | sqm | 155 ₹2,08,656.35 Lowest | 163 ₹2,19,425.71 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 64.35 | sqm | 149 ₹9,588.15 Lowest | 152 ₹9,781.2 |
Tender Value
₹3.8 L
EMD Value
₹9,534
Closing Date
3 Feb 2026, 5:00 pmClosed
OFFICE THE ASSISTANT ENGINEER LIDANDEWD VALAVANNUR
OFFICE THE ASSISTANT ENGINEER LIDANDEWD VALAVANNUR
Annual Plan-VALAVANNUR GP 2025-26(P.NO.52/26)-Valavannur GMLP School Auditorium Completion
2026_LSGD_830231_13
05/AE/LIDEW/VLNR/2025-26
Open Tender
Civil Works - Buildings
Item Rate
OFFICE THE ASSISTANT ENGINEER LIDANDEWD VALAVANNUR
Please refer Tender documents.
9 documents required · 9 mandatory
₹845
Yes
₹9,534
Yes
30 Apr 2026
24 Jan 2026
5 Feb 2026
24 Jan 2026
3 Feb 2026
24 Jan 2026
maintenance work
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
BOQ_1395098.xls
BOQ • 0.30 MB
52.rar
Tender Documents • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .