CONSTRUCTION OF SKIL HUB UNDER CSR FUNDS

Engaging of Hydraulic Excavator for Jungle Clearance and Levelling of site etc., complete as per SS and as directed by the Departmental officer in charge of the work

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH etc., complete as per SS and as directed by the Departmental officer in charge of the work by Manual means upto 3.00m depth in ordinary soils

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing Concrete for plain concrete (1:3:6) Nominal mix using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting for 14 days complete as per drawings and technical specifications as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."GROUND FLOOR"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Plinth Beam"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Columns"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Lintels"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Sun shade"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Ground Floor - Roof Beam"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Ground Floor - Roof Slab 150 mm"

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. The rate including cost and conveyance of steel, binding wire, labour charges for fabrication of grills, placing in position, etc., complete as per SS and as directed by the departmental Officer in charge of the work.

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd class. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Plastering with CM (1:4) 12mm thick. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, i ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles screen printed and polished of size600 x 600 mm and thickness between 8-10 mm 1st quality length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete , as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing glazed red or white full body ceramic wall tiles of Size 200 x 300mm / 245mm x 325mm and skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS and as directed by the departmental officer in charge of the work for external walls.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of workas per SS and as directed by the departtmental officer in charge of the work for Internal walls

Painting ot New Walls with Two coats of Plastic Emalusion paint of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for External walls

Painting to New Walls with Two coats of Plastic Emulsion paint of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for Internal walls

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Columns - 1st Floor"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Lintels - 1st Floor"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Sun shade - 1st Floor"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges." Roof Beam - 1st Floor"

Supply and placing of the M 25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, centering, shuttering for finished item of work as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges."Roof Slab 150 mm - 1st Floor"

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. The rate including cost and conveyance of steel, binding wire, labour charges for fabrication of grills, placing in position, etc., complete as per SS and as directed by the departmental Officer in charge of the work.

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd class. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Plastering with CM (1:4) 12mm thick. The rate including cost and conveyance of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work as per SS and as directed by the departmental officer in charge of the work, but excluding seigniorage charges.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, i ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles screen printed and polished of size600 x 600 mm and thickness between 8-10 mm 1st quality length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete , as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Providing glazed red or white full body ceramic wall tiles of Size 200 x 300mm / 245mm x 325mm and skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS and as directed by the departmental officer in charge of the work for external walls.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of workas per SS and as directed by the departtmental officer in charge of the work for Internal walls

Painting ot New Walls with Two coats of Plastic Emalusion paint of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for external walls

Painting to New Walls with Two coats of Plastic Emulsion paint of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for internal walls

Providing and fixing factory made uPVC any colour casement /Casement cum fixed glazed door comprising of uPVC multichambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension, EPDMgasket/ TPV, zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm) BMT-N.84.B

Providing and fixing 28 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame. BMT-N.92

Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size of 90 mm x 50 mm and without grill provision is of 75 mm x 50 mm and the Window Shutter section of 0.58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat with complete finished item of work. BMT-P.39

Providing and fixing of top hung Ventilator with fly mesh made of pre painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade with 144 holes per sq.inch and mullions to have double rebate for glazed shutter and flyshutter with a provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch etc., Single openable ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm thick complete for finished item of work. BMT-P.62

Manufacturing supply and fixing of M.S.Grill Gate with M.S.Angulars, M.S.Flats. The rate including cost and conveyance of all material and labour charges for fabrication of steel work including cost of welding rods , power charges and fixing the grills in position etc., complete as directed by the departmental officer in charge of the work.

Providing Painting with Synthetic Enamel paints - Two Coats - For New Iron Work. The rate cinluding cost and conveyance of all material, labour charges, etc., complete as per SS and as directed by the departmental officer in charge of the work.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:25561995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556Part6, Sec61974 fixed with screws complete Indian make : 410 x 265 x 305 mm. complete as directed by the departmental officer in charge of the work. BMW -D.34

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556Part4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm Single C.P. Pillar cock. Complete as directed by the departmental officer in charge of the work. BMW -D.21

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour. Complete as directed by the departmental officer in charge of the work. BMW -D.18

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks . BMW-G.01

Labour charges for placing the water storage tank on RCC slab. complete as directed by the departmental officer in charge of the work as per SS

Cost & Supply of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm, including cost and conveyance complete as directed by the departmental officer in charge of the work as per SS BMW-G.13

Cost & Supply of 75 mm dia 3 M Single Socket PVC Pipes PVC/SWR pipe - 4 Kg/sq.cm, including cost and conveyance complete as directed by the departmental officer in charge of the work as per SS BMW-G.11

Supply and fixing of 22.2 mm(3/4") dia OD pipe-SDR-13.5,PVC Pipes -4Kg/sq.cm, including cost of pipe, fixtures and all labour charges for fixing etc., complete as directed by the departmental officer in charge of the work BMW-I.221

Supply and fixing of 28.6 mm(1") dia OD pipe-SDR-13.5, PVC Pipes - 4Kg/sq.cm, including cost of pipe, fixtures and all labour charges for fixing etc., complete as directed by the departmental officer in charge of the work BMW-I.222

Supply and fixing of 12.7mm(1/2") N.P bib tap Indian make 3heavy duty sort body including cost and conveyance of all materials and all Labour charges etc., complete as directed by the departmental officer in charge of the work. BMW -E.09

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummies, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoretical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc., Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 100/125 mm. complete as directed by the departmental officer in charge of the work.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.. Complete as directed by departmental incharge of the work

Providing Solvent Cement / Gum for the pipe joints and as directed by the departmental authorities.(BMW-G.149)

Supply of 3 Core, 4.00 SQM Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster (ELEC-1.6.3)

Manufacture, Supply and Delivery of HDPE Pipes confirming to IS 4984- 1995 including transportation to anywhere in AP, excluding excise duty, sales tax and specials etc., complete (PE - 100 Grades)

Supply and Transportation of 2.00 H.P Three phase ISI self priming Mono block IP44 motor pumpset . complete as directed by the departmental officer in charge of the work as per SS ELEC-5.4.12

Fabrication, transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of complete.,.

Supply and laying of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid PVC pipe concealed in wall with all required PVC / Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains and as directed by the departmental officer in charge of the work.

Supply and laying of ISI 20mm outer dia medium (1.55mm thickness) grade with IS:9537 part 3 regid PVC pipe concealed in wall with PVC / Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size well seasoned wooden deep box including all labour charges etc., complete and as directed by the departmental officer in charge of the work.

Supply and run of 2 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete and as directed by the departmental officer in charge of the work.

Supply and Run of 2 of 1.5 Sqmm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete and as directed by the departmental officer in charge of the work.

Supply and Run of 2 of 2.5Sqmm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete

Supply and Run of 2 of 4.0Sqmm FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete

Supply and fixing of 20W,1900 lumens T8,not less than 1100mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012

Supply and fixing of 6 Watts LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. ELEC-3.8.4 b

Supply and fixing of 12 Watts LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. ELEC-3.8.4 c

Supply and fixing of 9W LED COB Down lighter, suitable for Recessed mounting made of pressure diecast aluminum housing with powder coating, with high efficiency reflector , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > =100 lumens/watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. ELEC-3.8.7

Supply and fixing of ISI mark batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED Bulb (for new installation).

Supply, Transportation and Fixing of 48" (1200mm) Sweep ISI mark as per IS 374 - 1979 and 5 Star rated Ceiling Fan with double ball bearings but without regulator including all standard accessories and all labour charges etc., complete.

Supply and fixing 7 Segment, TPN Distribution board with IP-42 Protection (Metal door) with phase segregation and separation between incoming and outgoing suitable for 3 Phase ELCB / RCCB / FP Isolator as incomer and DP Isolator / RCCB for phase control with 10kA SP MCCB as outgoing including internal connection and labour charges for surface / flush mounting etc., complete. 4.4.7 BLD-ELEC-4-4A

Supply and fixing 4 way Distribution board with 10/16/20A SP MCB including internal connection and labour charges for surface / flush mounting etc., complete BLD - ELEC 4.4.9

Providing independent earthling by excavating a pit to a depth of 2.25Mt in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary No.8 G.I. double earth wire and accessories with 18" dia 2" thick hume pipe ring duly providing staggered holes including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder in layers and all labour charges etc., complete

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Complete as directed by the Departmental officer incharge of the Work

Fabrication, Transportation and supply of hot-dip galvanized Octagonal Pole with BSEN - 10025 grade S355J0 steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180KMPH for 9 Mtrs mounting height Pole having dimensions bottom 185 mm,. Top 70mm with 3mm thick, base plate 275 x 275 x 20mm and 4 Nos of M24 x 1000 long 'J' bolts along with templates. Including Supply of1.5M Dragon type decorative. galvanized double arm with PU Painted bracket. Complete as directed by the Departmental officer incharge of the Work

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., Complete as directed by the Departmental officer incharge of the Work

Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete. as directed by the Departmental officer incharge of the Work

Supply and transportation of 100 Watts LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.

Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Gauge, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. ELEC-9.4.1

Supply, Installation, Testing and Commissioning of Electric Traction Passenger Lift of Makes: Kone/Otis /Schindler /Mitsubishi /Johnson /ThyssenKrupp/Fujitec with • Rated capacity :- 8 Passenger/544Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR/MRL • Rated speed :- 1.0/1.25mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1350 mm wide x 1350 mm deep x 2700 mm high ELEC-13.1.1

Supply of 1.5 TR, 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R410A, COP not less than 4.5.INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation with copper condenser. ELEC-5.5.1 A

M 25 Design Mix Concrete - "Sun shade" Ground and First Floor (Dimensions 0.6 X 0.6 X 0.1)

M 25 Design Mix Concrete "Ground and 1st Floor - Roof Slab 150 mm thickness