New Construction of Community Health Center at Valod, District. Tapi.

Name of Work :- New Construction of Community Health Center at Valod, District. Tapi.

Memorandum showing items of works to be carried out

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the One Hundred Twenty Rupees And Paise One

excavated stuff upto 50 Meter lead.(A) Loose or soft soil Only

Excavation for foundationFor depth from 1.5 m to 3.0m including sorting out and stacking of useful materials and disposing One Hundred Sixty Six Rupees And Paise

off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil Forty Four Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing Two Hundred Eighty Rupees And Paise Thirty

off the excavated stuff upto 50 Meter lead.(C) Hard Murrum Eight Only

Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm. in One Hundred Thirty Three Rupees And Paise

depth consolidation each deposited layer by ramming and watering. Sixty Five Only

Filling in plinth with chhara under floors including watering, ramming, consolidating and dressing etc. completed Six Hundred Fifteen Rupees And Paise Fifty

Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering ramming and Two Hundred Ninety Six Rupees And Paise

consolidating etc. complete Twenty Nine Only

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete. Four Hundred Seventy One Rupees And

Paise Sixty Nine Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted with

8 1889.40 50.71 Fifty Rupees And Paise Seventy One Only SMT

liters of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S.

Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm nominal size) and Three Thousand Seven Hundred Eighty Six

9 518.89 curing complete including cost of form work in (A) Foundation and plinth 3786.47 CMT

Rupees And Paise Forty Seven Only

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using

cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying,

Five Thousand Four Hundred Sixty One

10 904.33 including the cost of form work but excluding the cost of reinforcement for reinforced concrete including cost of 5461.07 CMT

Rupees And Paise Seven Only

admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) (Cement level 425kg ) For Foundation and Footing

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Six Thousand Seven Hundred Forty Four

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Twenty Seven Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) For

BEAMS up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form

Eight Thousand One Hundred Sixty Six

12 409.00 work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended 8166.86 CMT

Rupees And Paise Eighty Six Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) For All

Columns, pillars posts and struts up to 2nd floor level.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Six Thousand Four Hundred Sixty Three

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Seventy Five Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) for

coping up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Seven Thousand Three Hundred Ninety One

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Twenty Eight Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) For

Lintel up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Seven Thousand Two Hundred Forty Seven

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Seventy Six Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) For All

Chhajja up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Seven Thousand One Hundred Fifty Three

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Two Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) for

Slab up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Six Thousand Eight Hundred Fifty One

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Rupees And Paise Twenty Three Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) for

Staircabin up to 2nd floor level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of form Seven Thousand Four Hundred Rupees And

work but excluding the cost of reinforcement for reinforced concrete including cost of admixtures in recommended Paise Fifty Seven Only

proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per letest gov. GR 380 Kg ) for

RCC wall up to 2nd floor level.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding

Five Thousand Nine Hundred Sixty Six

19 2.40 reinforcement for reinforced concrete work in (C) RCC Slabs,landing,shelves,Balconies, Lintel, sill and Mullians Bands upto 5966.07 CMT

Rupees And Paise Seven Only

floor two level. (For Temporary Structure)

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding

Six Thousand One Hundred Seventeen

20 5.00 reinforcement for reinforced concrete work in upto floor two level. (C) RCC Weathershed (For Temporary Structure) 6117.57 CMT

Rupees And Paise Fifty Seven Only

Providing TMT Bar FE 500/500D reinforcement virgin steel for R.C.C. work including bending, binding and placing in position Seventy Eight Rupees And Paise Thirty One

complete upto 3rd floor level height Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/Sq. cm. in cement mortar 1:6 Four Thousand Four Hundred Forty Four

(1 cement : 6 fine sand) above Plinth level upto 3rd Floor Level (B) Conventional Rupees And Paise Ninety Only

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement

Six Hundred Seventy Five Rupees And Paise

23 2678.00 mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level upto 3rd Floor Level (B) Conventional 675.49 SMT

Forty Nine Only

Providing 15 mm thick mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement : 3 coarse sand) in rough finishing and 8 mm thick top coat of Two Hundred Twenty One Rupees And Paise

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. Forty Three Only

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of stairs and finished even and One Hundred Seventy Nine Rupees And

smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand) etc. complete. Paise Nineteen Only

20 mm thick sand faced cement plaster (Gutaka) on walls up to 3rd floor level above ground level consisting of 12 mm thick

Three Hundred Fifty Nine Rupees And Paise

26 4818.68 backing coat of CM 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of CM 1:1 (1 cement : 1 sand) etc. complete. 359.38 SMT

Thirty Eight Only

Providing throating or plaster drip and moulding to R.C.C. chhajja Forty Three Rupees And Paise Twenty Two

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction in

Two Hundred Ninety Seven Rupees And

28 156.00 proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali with 297.95 SMT

Paise Ninety Five Only

nails, etc complete as directed by the site-in-charge.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new

29 9830.00 wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 40.59 Forty Rupees And Paise Fifty Nine Only SMT

matter and sand papered smooth.

Providing and applying Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on under

coated wall surface to give and even shade including throughly brushing the surface free from mortor droppings and other Eighty One Rupees And Paise Thirty Eight

foreign matter and sand paperd smooth on new work to give an even shade.for all height Only

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade

One Hundred Seventeen Rupees And Paise

31 3091.46 after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 117.40 SMT

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting

Three Hundred Thirty Eight Rupees And

32 109.00 coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing 338.35 SMT

Paise Thirty Five Only

over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be

furnished before receiving any payment from the client.

Providing and laying 18 mm thick polished micro texture granite stone machine cut in single piece (Max. available) in sill and

jambs of Door, window, Ventilation frame laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed Three Thousand One Hundred Seventy One

with grey cement slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed Rupees And Paise Forty Only

as approved by architect engineer in charge.

P & L 60x120 cm. Matt vitrified Tiles flooring 8 & 10mm Thick Tiles flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing One Thousand Five Hundred Sixty Five

flooring and jointed 3 MM EPOXY GROOVE with color cement slurry including finised with flush pointing & cleaning the surface Rupees And Paise Fifty Only

etc. complete and Colour Shade approved by Engineer-In-Charge

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment One Thousand Fifteen Rupees And Paise

to match the shade of slab including rubbing and polishing etc. complete. (A) 20-25mm thick Eighty Two Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and laying Ceramic flooring tiles 300mm x 300mm in flooring treads of steps and landings laid on a Bed of 12 mm.

Nine Hundred Twenty Nine Rupees And

36 245.00 Thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in white ceand jointed with white cement slurry. 929.39 SMT

Paise Thirty Nine Only

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers

One Thousand Four Hundred Seventy Seven

37 1054.00 of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. 1477.25 SMT

Rupees And Paise Twenty Five Only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Seven Hundred Four Rupees And Paise

Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete Seven Only

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm

Three Hundred Ninety Two Rupees And

39 500.00 thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint 392.96 RMT

Paise Ninety Six Only

with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)

Supplying & filling fine sand pana in 150 mm compacted thickness over the base including necessary compaction, watering etc.

Four Hundred Sixty Rupees And Paise Fifty

40 13.00 complete. Item includes leveling by using vibratory plates compacted machine and as directed by engineer in charge. 460.56 CMT

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Nine Hundred Fifty Eight Rupees And Paise

Construction of granular sub-base 150 mm thick by providing coarse graded machine crushed B.T. material satisfying MOST

specification of grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm below - 20 %

Nine Hundred Forty Nine Rupees And Paise

42 287.60 )including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at 949.40 CMT

OMC and compacting with vibratory roller to achieve the desired density etc. complete.

Providing M-200 controlled cement concrete road using Trimix vaccum dewatering system with mixing Conplast P-211 (water

reduction concrete admixture) @ 100 ML per bag of cement with mixing of Recon 3S fibers (reliance product) at 125 gms per

bag of cement with providing and fixing & removing of "C" channel having 75 x 75 mm as per required level slope and

Six Thousand One Hundred Forty Seven

43 191.00 thickness of concrete and leveling and finishing the concrete using surface vibrator, power floater and trowel light brooming 6147.87 CMT

Rupees And Paise Eighty Seven Only

on as directed including making expansion joint of size 20 x 200 mm & filling the expansion joint using Colpar 200 as per

manufactures specitions by cutting of joint using concrete cutter machine etc. complete.

Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse One Thousand One Hundred Thirteen

sand) pointing in white ceand jointed with white cement slurry. Rupees And Paise Two Only

Providing and laying polished micro texture Granite slab flooring over 20 mm (average) base of cement mortar 1:6 (1 cement :

One Thousand Eight Hundred Ninety Eight

45 180.00 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete.18 mm thick 1898.80 SMT

Rupees And Paise Eighty Only

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of

Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm

Three Thousand One Hundred Rupees And

46 194.61 thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon 3100.70 SMT

Paise Seventy Only

sealant glass fixing to frame as per details etc. Providing and fixing Stainless steel mosqito net jali ,wire of I.S gauge designation

85-G with wire of 0.56 mm fix in aluminium door, window, ventilator shutters of any size, any shape with etc all complete at

all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual laying installed

Jali shall be measured.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt

1.094Kg / RMT with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with One Thousand Three Hundred One Rupees

colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window And Paise Eighty Two Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and fixing 4 mm thick both side laminated compact sheet selected quality (PIU approved brand list) fix in aluminium

door, window, ventilator shutters and partitions any size, any shape etc. P & F with EPDM/ PVC rubber gasket etc all complete

One Thousand Three Hundred Eight Rupees

48 17.00 at all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual laying 1308.09 SMT

And Paise Nine Only

installed sheet shall be measured (Cost of aluminium snap beading shall be paid in basic item)

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Twenty Four Rupees And Paise Twenty Eight

Painting Two coats over & including a priming coat on new steel and other metal surfaces with enamel paint, brushing interior One Hundred Two Rupees And Paise Eighty

to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.. Two Only

Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround

square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil One Hundred Six Rupees And Paise Forty

painting etc complete (A)Plain grill Eight Only

Providing & fixing in position Colour anodize alluminium pivoted Single/Double Shutter door & partition with alluminium

anodized hollow section frame of approved shade fabricated from alluminium standard section for outer frame size

101 mm x 44.5 mm (of app. wt. 1.30 kg/Rmt.) and door styles and top rial of alluminium section size 47.5mm x 44.5 mm (of

app. wt. 1.14 kg/Rmt.) bottom rail & lock rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/Rmt.) and providing rubber Three Thousand Three Hundred Ninety Eight

gasket all over including providing 4 Nos. heavy handle(200mm Long), 1 No. heavy lock (4 Lever Godarej Type), bracket, Rupees And Paise Sixty Five Only

stoppers (150mm), Fe 325 Floor spring with 25 mm thick particle board sheet both side 1.5mm laminated sheet of approved

make fixed clits including all required materials labours and equipments as per detailed drawing as directed by

Engineer-In-Charge.

Providing and fixing 55 mm thick Single/Double shutter Specially Design door with 35mm flush door, solid core with two side

MM. Marine Ply with Country wood Beading door shutter & 1mm Laminate on both sides colour, pattern and design of which

is to be approved by the architect. Durable Grip shall be providing with 30cm stainless steel handle and necessary Locking Four Thousand Five Hundred Eighty Rupees

system of Godrej or Quivalent, stainless steel hinges,Aldrops,Tower Bolts ,fixtures & fastenings, etc complete for all required And Paise Thirty Five Only

materials labours and equipments as per detail drawing main Door.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required

size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of

kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus Three Thousand Nine Hundred Fifty Eight

of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, Rupees And Paise Fifty Nine Only

water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of Engineer-In Charge. 35 MM

Providing and fixing bright finish brass hydraulic door closer of approved model and make with necessary screws and finishing One Thousand Four Hundred Twenty Three

etc. complete. Rupees And Paise Nine Only

Providing and laying white glazed tiles equal size pieces for CHINA MOSAIC WATER PROOFING TREATMENT WITH BRICK BET

BASE to terrace including cleaning the surface opening the creaks in " V " grooves pattened filling the same water proof

cement mortar 1:1(1 Cement : 1 sand ) including BRICK BAT as directed to have proper slope over a layer of C.M. 1:1 (1

Cement : 1 sand) including finishing the top surface with 15mm thick water proof cement plaster in C.M. (1:3) (1 Cement :

sand) and finishing with a floating coat of neat cement slurry using chemical water proofing compound as per manufactures Eight Hundred Sixty One Rupees And Paise

specifications and standard specifications as per indian Water proofing or equivalent including curing at specified period as Fifty Three Only

directed including finishing the top surface with equal size white glazed tiles pieces including round shape vata 100mm x

100mm size with filling white cement in joints, using chemical water proofing as per mfg., specification & standards with

cleaning top surface using acid including drip moulding at the junction of vata & plaster etc..complete as directed by E.I.C.

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per Indian

Two Thousand Fifty Seven Rupees And Paise

57 305.00 Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will be paid 2057.37 RMT

Thirty Seven Only

for payment heigth max.1.0 mt.). The Work to be executed as per consultant drawing .

Fabricating, supplying and fixing in position SS daso for staircase and balcony with brush finish and 304 grade as per Indian

One Thousand Three Hundred Thirteen

58 130.00 Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will be paid 1313.00 RMT

for payment ). The Work to be executed as per consultant drawing .

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and fixing Sand which type Granite platform including supplying and fixing granite stone 18 mm thick mirror

polished 1st quality Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone

Two Thousand Seven Hundred Seventy Two

59 46.21 platform fixing in top and sides and itermediates supports fixing with cement mortar and adhesivee and finishing including 2772.45 SMT

Rupees And Paise Forty Five Only

cutting for fixing of sink any size (as directed by engineer incharge) at required position etc complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals

20 x 5 mm size with top & bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking Six Thousand One Rupees And Paise Ninety

arrangements, stoppers handles including applying a priming coat with red lead paint & Two Coat of oil paint etc. complete Five Only

Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface, Densely

One Thousand Eight Hundred Ninety Three

61 208.00 Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 with levelling, 1893.75 SMT.

Rupees And Paise Seventy Five Only

chemical adhasive for fixing, corner junction.

Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand and manufacture on internal walls to

Four Hundred Fifty Four Rupees And Paise

62 486.00 give an even and smooth surface. Thoroughly brushing the surface free from mortar dropings and other forein matter and 454.50 SMT.

sand prepared smooth.

Providing & applying two Componant ,non slumping ,non-sagging, thixotropic epoxy bedding compond & adhesive

compatible with for tiles for coving at radius of 25 mm or as directed by the architect's / Engineer-in-charge make it fit for Five Hundred Seventy Five Rupees And Paise

tiles inclusive of Labour, material and Equipment etc. for all heights, location, shape & size as directed by the architect/Bank Seventy Only

engineer incharge. (Actual Length shall be measured for payment.)

Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Coral or equivalent)

incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base Three Hundred Fifty One Rupees And Paise

coat of 18 mm thick smooth mala plaster etc. Complete Colour and shade as approved by Architect/ Engineer in charge for all Forty Eight Only

floor all height.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give

Eighty Nine Rupees And Paise Eighty Five

65 345.00 an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign 89.85 SMT.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified

edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross

’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the

1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate One Thousand Six Hundred Seventy Four

ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services Rupees And Paise Fifteen Only

like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I.

adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’

bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate falseceiling area will be measured

from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The

calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity. 0.043° w/m KC.for the best thermal Insulation

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Constructing,Providing and Fabricating cattle trap using channel section frame of size ISHB series 100m x 100 mm X 5.4 mm

(Weight 27.10 kg/Rmt) and L Section 75 mm x 75mm X 6 mm (Weight 6.80 Kg / RMt) at frame & central part Intermediate

Support for welding G.I. Pipe at 63mm space of size 63mm dia C Class in a frame made of channel section of 65mm x 65mm X

Six Thousand One Hundred Sixty One Rupees

67 4.80 5 mm(Weight 4.90 Kg / RMt) all round including necessary Two coat prmers and Two coat of Oil paints as suggested & fixing 6161.00 SMT

the urit on prepared chamber of masonary wall using MS hold fast embeded in masnary wall top as per detail drawings & as

directed by Engineer in charge as per drawing by necessary arrangement etc.complete.

Providing and fixing high fencing with Y shape long M.S. Angle posts 40mm x 40 mm x6 mm (0.60 H X 0.60 W ) and oil painting

3 coats fixed at 2.5 Mt,C/c. with 3layer of barbed wire and on Y shape Concertina Coil Diameter 900 mm, Razor Type Single Six Hundred Ten Rupees And Paise Eighty

Razor GSM 40 GSM, Length 100 m, Material Iron, Surface Treatment, Galvanized Etc Complete One Only

Drilling Of 215mm Dia Bore In Over Burden Strata & Lowering Of Casing & Further Drilling Of 165mm Dia. Bore In Soft & Hard

Two Hundred Sixty Six Rupees And Paise

69 150.00 Rock With Devlopment Of Bore Measuring The Yeild & Fixing Of Bore Cap Etc. Completed (I)0.0Mts To 150.00Mts 266.64 RMT

Sixty Four Only

Providing and Supplying Of 175mm Normal Dia.UPVC Casing Pipe. Five Hundred Thirty One Rupees And Paise

Forty Seven Only

Providing & Fitting Of 200mm Dia. Cap Plug. Seven Hundred Fifty One Rupees And Paise

Ninety Five Only

Providing & Fixing HDPE Pipe For Bore Well.(I) 32MM Dia

72 150.00 55.55 Fifty Five Rupees And Paise Fifty Five Only RMT

FLUSH PARTITION (laminate finish) :

Providing & fixing flush partition up to false ceiling ht (thickness of partition is 75 mm) having 12 mm thick Marin plywood IS

710 both side on aluminum framing. Aluminum framing size for vertical & horizontal support is 50 mm x 25 mm. All exposed

surfaces finished with 1 mm thick laminate of approved shade without any air gap and grooving as per design. Necessary

framing to be erected above false ceiling. No extra cost to be paid for the same. Before installation, make hole/face plate for

Four Thousand Five Hundred Twelve Rupees

73 36.00 conduit pipes of electrical / networking cables with open able stud from partition Including all materials and labor etc. Make 4512.31 SMT

And Paise Thirty One Only

necessary grooves as per shown in drawing. All bottom ends are covered with Ghana teak bidding Patti finished with laminate

Complete with all necessary hardware & adhesives as per details given in drawing and as per instructions of Architect/

consultant /Engineer In charge. Contractor has to provide all necessary cut outs (race ways.) for Electrical works & no extra

payment shall be made for it.

Partly glazed partition: Providing & fixing full height partly laminated & partly glazed partition (up to false ceiling ht) using

12 mm thick marin plywood IS 710 both side on aluminum framing of guage 16 . Aluminum framing size for vertical &

horizontal support is 50 mm x 25 mm .Grid of aluminum framing is 600 mm x 600 mm. All exposed surfaces finished with

mm thick laminate of approved shade without any air gap and grooving as per design. . Necessary framing to be erected

above false ceiling (up to beam and slab height.) No extra cost to be paid for the same. Before installation, make hole/face

Four Thousand Nine Hundred Fifty Six

74 50.00 plate for conduit pipes of electrical / networking cables with open able stud from partition Including all materials and labour 4956.06 SMT

Rupees And Paise Six Only

etc. For glazing Using of 12 mm thick toughen clear glass with proper crystal edges & with suggested frosted films on glass.

Frosted film material rate is provided extra as per given cost in tender item. All joints are covered with Ghana teak bidding

Patti finished with laminate. Complete with all necessary hardware & adhesives as per details given in drawing and as per

instruction of Architect/consultant/Engineer In charge.

STORAGE BELOW PANTRY COUNTER :Providing & fixing full ht storage having size as per detail drawing , having depth of

mm, having skirting of 75 mm, with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm thick

Marin ply, having shutters of 9 mm thick double sandwich ply with using 12 mm thick Marin ply for framing. All complete with

proper Burma teak biding. Back ply is 12 mm Marin ply. All exposed & internal surfaces are covered with 1 mm thick laminate. Four Thousand Two Hundred Ninety Two

External & internal joints covered with bidding Patti complete with laminate finish. All complete with proper hardware like Rupees And Paise Fifty Only

locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details

as per shown in detail drawings & as per instructions of architect/consultant / in charge engineer

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

Seven Hundred Thirty Four Rupees And

76 114.88 bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and 734.19 SMT

Paise Nineteen Only

Trusses.(1) 0.80 mm thick sheet.

Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, bars, truss, purlins, runners,

cleats, insert plate, base plate etc for all structural elements as per detail, made up from closed structural steel hollow sections

(RHS/SHS including rolled section ) as per IS 4923 of grade Yst 310 mpa - weather resistant of Tata Structural / sections or an

approved equivalent as per details / drawings/instructions including cutting, bending, jointing, connecting, welding and /

77 11297.57 105.00 One Hundred Five Rupees Only Kg.

bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed. The rate to include all

necessary fixtures, fastening including welding rods of standard approvded quality etc for complete the job. The rate shall also

include the one coat of red lead paint, epoxy coat & necessary scaffolding etc. complete as directed

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. One Thousand Eighty Four Rupees And Paise

work Thirty Only

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable Five Hundred Sixty Four Rupees And Paise

materials with all lead and lift.(ii) In Cement Mortar Sixteen Only

Dismentling steel work including distempering and stacking the materials with all lead and lift.

80 48000.00 3.76 Three Rupees And Paise Seventy Six Only Kg.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other Two Hundred Fifty Seven Rupees And Paise

attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area. Sixty Two Only

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all Seventy Six Rupees And Paise Ninety Six

lead and lift ( for any dia, of pipe Only

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the Four Hundred Fifteen Rupees And Paise

materials with all lead and lift. Seventy Nine Only

Providing And filling with good quality sinder(steam coal) as directed by engineer in charge in sunks in layers of 15 cm Four Hundred Fifty Rupees And Paise Forty

thick,including watering,placing ,ramming well etc as directed, for all floor. Six Only

Corner Guard Protection System in entire hospital : Supply and Installation of Corner Guard protection system fixed to brick

Seven Hundred Eighty Eight Rupees And

85 54.00 wall/or tile/dado at the corner from finished floor level. It should be adjustable end cap. Providing and fixing brush/mirror 788.81 RMT

Paise Eighty One Only

finish S.S 304 grade Angle 40.0 x 40.0 x 3.0 mm &. 1.00mt. Ht. x 3.75 kg/mt. = 3.75 kg.

LOUVERS: Supplying and Installation of GI 84C powder coated louvers etc complete as per drawing& selection as directed by Two Thousand Four Hundred Sixty Rupees

Architect/Engineer incharge. And Paise Thirty Six Only

Providing & fixing –Roller blind curtain with head rail as standerd make – with necessary fitting with fabric shadeas. The fabric

One Thousand Eight Hundred Two Rupees

87 102.00 is 100% polyester with epi- -176 the weight of fabric – 390 gsm-as warp-80 den twisted & weft -300 den roto as max width of 1802.85 RMT

And Paise Eighty Five Only

fabric-230 cm.as per instruction of Architect & E.I.C.

Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid

88 20.00 for separately)(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) 3.26 Three Rupees And Paise Twenty Six Only

Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid

89 14.00 for separately) (ii) Indian (Letters/Figures) 3.60 Three Rupees And Paise Sixty Only

Extra over above items for using thick white paint instead of black japan paint. (i) Block (Letters/Figures)

90 10.00 0.07 Zero Rupees And Paise Seven Only

Providing and fixing 3 mm thick PVC sheets as signange and display of health signs/information of required size having retro

reflective letters/design as per requiement, fixing the same through approved adhesive etc. complete work shall e carried out Three Hundred Eighty Two Rupees And Paise

as per instruction of Engineer-in-charge (Approved make PVC foamed sheet only) (45 x 15 cms.) Seventy Nine Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Lead Lined Doors:Providing and fixing Lead Lined Door of Navair make, comprising of Hardwood Frames, interlayered with

specified thickness of lead sheet and shutter comprising with approved material as per manufacturer specification, the whole

system shall be in accordance to AERB norms. The lead sheet Overlaps in frame & edge to edge lead lining in shutters must be

considered as approved by EIC.Door Frame: The Door Frames shall be hardwood red merandi Frame, The Frame Shall be fully

lead lined of 2 MM lead Sheet with 99% purity and as defined by AERB. Frames should be fixed by anchor fasteners for

installation on a finished plastered masonry wall opening. The size of frame shall be min. 120 X 70 mm or as per approved

manufacturer standard, with layered specified thickness of Lead Line Sheets (in door type) being overlapped from either side,

the finish of frame etc. shall be as per direction of Engineer in Charge. Frame rebate shall be as per manufacturer standard,

the finish of the door frame shall be wooden primer finish as per EIC. The door frame shall be fixed with anchor fastener /

dash fasteners or as per manufacturer and as approved by EIC. Shutter: Door leaf shall be 44 mm thick with commercial ply &

laminate both side with or without vision lite.incase vision lite is required it shall be only Lead Glass as recomomnded by Twenty Thousand Seven Hundred Five

AERB/DRC . The internal construction of the door should be rigid with lead line of 2mm thick all across the inside of the Rupees Only

exposed surface. Shutter shall be made with 6mm commercial borad and 35mm commercial board sandwitch between 2mm

lead sheet. All doors should be factory prepped for receiving appropriate hardware and provided with necessary

reinforcement for hinges, locks, and door closers as per ANSI Standard , the shutter shall be finished with approved 1mm thick

laminate both side. Hardware: The hardware shall be fire rated hardware in accordance with requirement of doors and as

specified in the door type in the BOQ. The necessary reinforcement to be taken care if required while placement of hardware.

All the hardware shall be as approved by EIC and from approved makes only. All hardware shall be with min. 2 years of

warranty. Any miscellaneous items, accessories, screws, sealant, seals, filler material etc. all to be consider to do the job and

give full solution. No complaint shall be entertained & no additional payment to be done. The whole system shall be factory

prepped, the approved manufacturer and prime contractor shall ensure about the zero leakage with including all hardware &

fixtures. Note:-As per drawings and design supplied by architect and instruction given by authority and E.I.C.

Supply of Wall Paneling : 1. The material of the wall elements should be at-least 1 mm thick Stainless Steel 304 Grade sheet

which should be electrically conductive and finished with 60-80-micron Anti-bacterial powder coating. The surface finish

should be powder coated with anti-bacterial powder coating. The 1 mm thick Stainless Steel 304 Grade sheet panels should

have 12-15 mm thick soaked plaster board on back side and flanged on all four edges. The standard height for operating

theatre shall be approx. 3000mm. 2. Lower wall element (approx. 900mm high). 3. Upper wall element (approx. 1800mm

Ten Thousand Fifty Two Rupees And Paise

93 83.00 high). 4. A customizable installation module of 200 mm between the lower and upper wall element. 5. Vertical gap between 10052.03 SMT

the wall panels should be 10 mm maximum and should be filled with removable extruded silicon sealant Gasket matching the

Color of the wall panels. Silicon Gasket should be of food grade quality and anti-bacterial in nature. Sealing of vertical gap with

conventional silicon filler should be deemed unacceptable. 6. The antibacterial powder coating shall have zero solvents or

VOCs the system should not affect/damage to the environment of Modular Operation Theatre.

Supply of Ceiling System : 1. The snap fit ceiling tiles should be made up of Stainless Steel 304 Grade sheets, 0.6 mm thick and

should be coated with antibacterial powder coating. 2. The metal tiles ceiling should be suspended ceiling, constructed as a

modular framework system with a grid of 4 feet x 2 feet to fulfil the requirements of flexibility and easy future refurbishment

of the modular operating theatre. Sizes of 2x2 feet for smaller rooms, such as preparation rooms, washing and sterilization

rooms. Ceiling mounting grid should not be visible. 3. The grid should be rigid and remain perfectly stable during all the

subsequent site operations. 4. Room lighting, possible air supply inlets, ceiling service units and return outlets should be

Seven Thousand Sixty Seven Rupees And

94 36.00 integrated into the metal ceiling system. It should be possible to remove the panels individually, with exceptions of those at 7067.73 SMT

Paise Seventy Three Only

the edges. 5. The ceiling support element should be combination of galvanized / powder coated steel suspension brackets

along with threaded rod. The installation should be carried out with main runners spaced at 1200 mm (center to center)

securely fixed to the slab by the means of roll plug, 3mm thick L-clamp & 8.0 mm diameter GI rod fully threaded (with Hex nut

for precise level adjustment) at 1200 mm maximum (center to center). The distance between the last runner & adjacent wall

should not exceed beyond 600mm.

Supply of Glass Panel : Glass Panel with printed Graphics on 8mm tempered glass.(dimensions 1000 mm W x 2400 mm H) Fourteen Thousand Five Hundred Sixty Two

Rupees And Paise Eighteen Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supply of Antistatic & Conductive Flooring : 1. Providing & fixing of 2mm thick conductive PVC flexible homogeneous

compacted floor covering in roll suitable for use in operation theater. It shall confirm to incorporate carbon encapsulated

granules throughout its full thickness and should have conductive backing to ensure optimal and constant conductive

properties throughout its full life expectancy. Its surface should be densely compacted for improving wear and ease of

maintenance. 2. The floor finish should terminate at the room perimeter passing over a concealed PVC Cove Former and

continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to

be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. A copper strip/mesh should be

Three Thousand Two Hundred Sixteen

96 36.00 layer under the Roll, with one earthing point for every 250 sft of area. The flooring should be installed on a smooth, clean and 3216.85 SMT

Rupees And Paise Eighty Five Only

dry sub floor which should be free from any undulations. 3. Self Leveling Compound (Level0) containing high quality synthetic

resins, special cements and selected fillers, when mixed with water, a fluid easily toweled mortar with free flooring properties

it should be applied normally up to 2-3mm. Primer should be applied on the sub-floor to seal the pores, to prevent air bubbles

from rising through the applied mortar to maintain flow life and also to promote excellent uniform adhesion to the substrate,

any other make as per manufacturer’s specification and as per direction and the entire satisfaction of Engineer-in-charge

Supply of Laminar Flow Unit (Size 2.4m x 2.4m) :- 1. The laminar air distribution ceiling (surgical module) should be suitable for

modular operating theatre in accordance with standard DIN 1946 part 4 - 2008. 2. Material: AL alloy and SS, powder coated in

the color to match the color shade of ceiling. The air distributor shall be made of double micrographic texture (two layers,

type: SEFAR PET 1500 120/305-40W PW) with covering frame made of aluminium extrusion for cleaning and disinfectant. The

HEPA filter for the surgical module shall be replaced from within the room. The HEPA filter shall have a minimum efficiency on

MPPS (0.1 to 0.3 micron) of 99.999%. The filter shall be of rigid metal frame construction. 3. The surgical module should be

‘Vertical Laminar Air Flow Ceiling’ system to constantly provide sterile air supply to the operating zone. The size of the module

flow section should be specified in the equipment schedule or drawings. Proposed shape of the laminar flow unit is

rectangular or square. 4. Installed HEPA filters class should be at least H 14 Gel seal with double sided protection grid.

Average bacteria count should not be more than 10 cfu/m3. 6. Average particle counts on 0.5micron and larger should not be

more than 100 counts per cubic feet. 7. The module should be installed into false ceiling and should have individual ceiling Five Lac Eight Thousand Four Hundred Forty

system variants. Filter housing of LFU should be tightly welded, mounted in a frame of extruded aluminium profile, the Eight Rupees And Paise Thirty Nine Only

circumferential groove of aluminium extrusion should enable connections of ceiling cassettes. The space between the filter

housing should be covered by antibacterial powder coated galvanized sheets. All joints should be filled by silicone sealant.

Allowances should be made for the operating lamp and/or other ceiling mounted pendants that needs to be neatly integrated

into the chamber and penetrate the lamina riser. 9. Purpose should be to maintain stable airflow in the operating area &

lowest possible mixing at pure air flow with contaminated air from surrounding environment. 10. The central lighting should

be provided in the LFU. 11. The system, supplied with the recommended air flow volume, should guarantee an ISO 5 class in

the clean area underneath the filtering ceiling, in Operational Simulated testing conditions. 12. The LFU should have a Plenum

of welded airtight housing made of antibacterial powder coated aluminium.

Supply of Exhaust Grill with Return Riser :- 1. Return air exhaust grill should be provided in the Modular Operation Theatre.

The air-conditioning exhaust channels should be used for air exhaust from the room and should be installed in the partition

walls. 3. These cabinets should have suction from bottom and top. riser shall be made of galvanized sheet. 4. Designed flow

Thirty Five Thousand Nine Hundred Fifty

98 4.00 rate should not be less than 1000 m3/hr. Distribution of exhaust air volume should be divided between fluff strainers to 35953.98 Nos.

Three Rupees And Paise Ninety Eight Only

maintain the required pressure within the theatre without causing turbulence. 5. The Exhaust air cabinet should be

manufactured and supplied by the supplier of wall and ceiling system supplies.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supply of Pressure Releif Damper :- 1. Pressure relief dampers or Overflow ports should be provided in each room to prevent

contamination of air from clean and dirty areas. 2. Suitably sized air pressure relief damper strategically placed, enabling

differential room pressure to be maintained and ensure that when doors are opened between clean and dirty areas.

Counter- weight balancing system should be provided in the pressure relief dampers to maintain positive pressure inside the

Twenty Thousand Eight Hundred Forty Three

99 2.00 operation room. 4. Air pressure stabilizers have unique capability of controlling differential pressure to close tolerance. The 20843.88 Nos.

Rupees And Paise Eighty Eight Only

pressure relief dampers should remain closed at pressure below the set pressure and should open fully at a pressure only

fractionally above the threshold pressure. 5. The body should be epoxy powder coated as per standard BS colours. High grade

electrolyzed steel plate should be used for body and high grade SS304 stainless steel for blades.

Supply of Peripheral/Ambient Light :- 1. Peripheral lighting and Modular Operation Theatre luminaries should be provided

with intensity min 500 Lux. 2. Luminaries cover should be made of highly resistant, disinfectant proof laminated safety glass

with stylish fine grained surface, glass pane. The dimensions should be: 4 ft(L) X 2ft(W) or 2 ft(L) X 2ft(W). 3. The reflectors

should be of high quality, cleanable and non-deteriorating. 4. Recess frames should be gas tight. The fitting should be flush

Nineteen Thousand Eight Hundred Eighty

100 6.00 with the ceiling and should be removable. The light fitting should be uniformly and aesthetically distributed on the ceiling to 19884.38 Nos.

Four Rupees And Paise Thirty Eight Only

provide uniform illumination in the modular operation theatre. Light should not interfere when green mode endoscopy is

performed. 5. Peripheral lighting should be done according to IP54. 6. The light box / body should be antibacterial Color

coated. 7. The Color of the light body should be matching with the ceiling Color or Color theme of the modular operation

Supply of X-Ray Viewer : 1. LED type flat panel X-ray viewing panel should be supplied. 2. The panel should be Slim, Durable

and Effective. 3. Energy Efficient: Savings range from 82% to 93%. 4. Power efficient. L.E.D Light with long life- up to

hours. 5. It should comply with relevant electrical safely codes. 6. It should be a 2-panel viewing screen. 7. Mounting should be

flush with the wall to avoid dust accumulation and growth or organisms between wall and panel. 8. The different user on the

front panel should be a uniformly lit screen. 9. Dimming electronic control should be enclosed at the bottom of the cabinet. Thirty Two Thousand Four Hundred Eight

10. Proper spring-loaded film clip with rollers should be provided to hold the films firmly and to remove the film without Rupees And Paise Thirty Eight Only

scratches. 11. Each panel should be able to illuminate films up to 14”x17” size. 12. The viewer should be provided with Film

activated switch. It should be automatic shut down if no film inside for 2 sec. 13. 12 step digital dimmer to get the perfect

brightness. 14. 2 Panel dimmable x-ray viewing screen designed to provide high level of control luminance.

Supply of Operating List Board :- Providing Magnetic Writing Board in each operating theatre. It should be made of ceramic

Nineteen Thousand Four Hundred Twenty

102 1.00 having Magnetic properties and should be flushed to the wall of the operating room. 19429.88 Nos.

Nine Rupees And Paise Eighty Eight Only

Supply of Touch Control Panel :- All the controls for the modular operation theatre should be provided on a single touch

screen-based system. This micro controller based electronic control panel should be mounted directly in the operation

theatre. The following features should be incorporated in the control panels: 1. Operation timing - Elapsed time. 2. Anesthesia

Two Lac Twelve Thousand One Hundred

103 1.00 countdown - Countdown timer. 3. Time - Real time clock. 4. Date. 5. Temperature and Humidity Control and Display. 6. Hands 212100.00 Nos.

Free Telephone. 7. Medical Gas Alarm System. 8. Lighting Control - Peripheral, Snowless Dome, Plenum Light, View box with

brightness control. 9. Touch Panel Size: 21inch (LCD Monitor). 10. HEPA Filter Status Indicator 11. Peripheral Light control with

Supply of Double Arm Surgical Pendant :- - 1x soffit cover + 1x gas section- 2x arm (L= 800+800mm)- pneumatic brake- source

head L12 (2x shelf bar 1200 mm)- 5x DIN gas outlets / 1x AIR4, 2x CO2, 1x Vac, 1x O2 - 6x INDIAN electrical outlet with LED

Six Lac Fifty Five Thousand One Hundred

104 1.00 indication - 4x INDIAN electrical outlet with LED indication - 10x jack bush (earthing)- 2x Data connector RJ45 cat6- 2x straight 655105.19 Nos.

Five Rupees And Paise Nineteen Only

lid with KU68 and sides (preparation)- 4x shelves 550x450mm with medi-rails - 1x shelf 550x450mm with drawer (h=110mm)

Supply of Single Arm Anesthesia Pendant :-- Soffit cover + 1x gas section + 1x AGSS section- 1x arm (L=800 mm)- pneumatic

brake- source head L10 (2x shelf bar 1000 mm)- 5x DIN gas oulets / 2x AIR4, 2x O2, 1x VAC- 1x RSP AGSS active gas outlet- 3x

Four Lac Ninety Six Thousand Five Hundred

105 1.00 INDIAN electrical outlet with LED indication - 3x INDIAN electrical outlet with LED indication- 6x jack bush (earthing)- 4x Data 496567.01 Nos.

Sixty Seven Rupees And Paise One Only

connector RJ45 cat6- 2x empty lid (45x45mm)- 1x shelves 550x450mm with medi-rails with control

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. One Hundred One Rupees And Paise Ninety

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

One Hundred Seventy Rupees And Paise

107 41.00 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling 170.36 Rmt

Thirty Six Only

and floor etc. complete.[A] 15 mm.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Seventy Two Rupees And Paise Sixty Five

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Ninety One Rupees And Paise Eighty Four

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be One Hundred Nineteen Rupees And Paise

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Fifteen Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be One Hundred Ninety Five Rupees And Paise

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Sixty Seven Only

solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Eight Hundred Thirty Four Rupees And Paise

160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as Thirty Eight Only

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Eight Hundred Fifty Seven Rupees And Paise

110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as Sixty Five Only

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of

Five Hundred Eighty Five Rupees And Paise

114 68.00 self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. 585.37 each

Thirty Seven Only

Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection

115 40000.00 3.95 Three Rupees And Paise Ninety Five Only litre

etc. complete on terrace

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x

One Thousand Two Hundred Ninety Two

116 29.00 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P & S type. 1292.19 Each

Rupees And Paise Nineteen Only

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the

Two Hundred Fifty Four Rupees And Paise

117 395.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm 254.89 Rmt

Eighty Nine Only

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with

Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including

Eleven Thousand Forty Two Rupees And

118 4.00 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total 11042.74 Each

Paise Seventy Four Only

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 (I) for depth Five Hundred Twenty Two Rupees And Paise

from 0.9M to 1.5M. Ninety Six Only

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal

size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with

Cement Mortar 1:3 (1- Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1 Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including

Nineteen Thousand Three Hundred Forty

120 2.00 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total 19349.63 Each

Nine Rupees And Paise Sixty Three Only

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (2) B type depth 1.50 Metre for 150mm diameter sewer.

(II) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. GR Part thereof over item No.24.27 (I) for Three Hundred Ninety Seven Rupees And

depth from 1.50M. to 2.25M. Paise Nineteen Only

Providing and fixing cast iron steps of size 500mm x150mm x 22.5mm and painting with two coats of Anti corrosive paint etc. Two Hundred Seven Rupees And Paise Sixty

complete. Six Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1

Two Thousand Nine Hundred Thirty Two

123 12.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 2932.93 Each

Rupees And Paise Ninety Three Only

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(i) Two Hundred Forty Two Rupees And Paise

for 455mm x 610mm size. Thirty Nine Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

Three Thousand Six Hundred Sixty Rupees

125 8.00 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm 3660.76 Each

And Paise Seventy Six Only

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry Two Hundred Sixty Four Rupees And Paise

chamber.(ii) for 500mm x 700mm size. Eighty Six Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1

Seven Thousand One Hundred Eighty Rupees

127 6.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 7180.44 Each

And Paise Forty Four Only

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry Three Hundred Twenty Five Rupees And

chamber.(iii) for 600mm x 850mm size. Paise Fifty Nine Only

Providing and fixing on platform stainless steel Sink glossy ASIS 304 grade x 1mm thick with over all size 610x460mm & bowl

size 560x410x200mm & SS Pillar cock with extention body like JAQUAR FUS-CHR-29021N including fixing the sink in platform Nine Thousand Five Hundred Fifty Five

& making good the same including the cost of PVC waste pipe of 32mm dia. and PVC waste coupline etc complete as directed Rupees And Paise Eighty Only

Providing and fixing Two way BIB cock with wall flange of genuine Jaquar ompany brand, in with model no FUS-CHR29041,

Three Thousand One Hundred Thirty One

130 44.00 water tap brand or approved ISI brand quality, fixing in pieline and testing the same… etc., complete., as directed by EIC 3131.00 Each

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and fixing wash down water closet European type WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP- SIZE

365x545x360MM and P trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement mortar

1:1 (1 cement : 1 find sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS braided hose

Twenty Thousand Four Hundred Twelve

131 40.00 1.2 MT long pipe to water closet - JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern Body with Installations Kit & 20412.10 Each

Rupees And Paise Ten Only

“S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with Control Plate Opal -

JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -1151N etc,complete

Providing and fixing Wash Basin vitreous china table top wash basin size 560mm x 450 mm in white colour. Like JAQUAR CNS-

WHT-903 SIZZE OF 425x340x175MM with single hole for pillar tape with CP or MS brackets painted white including cutting

holes and making good the same including (1) Providing and fixing SS waste coupling of 32 mm dia size half theread with

80mm height like jaquar -ALD - CHR-705 for wash basin with rubber plug (2) Providing and fixing SS bottle trap with internal

partition of 32mm size with 250mm &190mm long wall flange connection pipes and wall flange likejaquar ALD-769 L250X190 Thirteen Thousand Six Hundred Thirty Five

of approved quality with necessary fitting for wash basin (3) Providing and fixing SS Pillar cock with extention body like Rupees Only

JAQUAR FUS-CHR-29021N with necessary fittings etc. complete (4) Providing and fixing SS finish Angular Stop Cock quarter

turn like Jaquar code FUS-29053 with necessary fittings (5) Providing and fixing SS finish soap dispenser with metallic bottle

like Jaquar code-ACN-CHR-1135N,Towel ring -jaquar-CAN-1121BN etc. complete

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware size of urinal 370mm x 315x 620 mm.of jaquar make code no URS -WHT-132530

including (1) Providing and fixing SS finish waste coupling of 32 mm dia size half theread with 80mm height like jauar -ALD -

Fourteen Thousand Five Hundred Sixty One

133 8.00 709 for wash basin with rubber plug (2) Providing and fixing SS finish bottle trap with internal partition of 32mm size with 14561.17 Each

Rupees And Paise Seventeen Only

250mm &190mm long wall flange connection pipes and wall flange like jaquar ALD-769 of approved quality with necessary

fitting for wash basin (3) SS finish flush valve of auto closing system like jaquar PRS-073 of approved quality and connection

with waste pipe trap etc. complete

Providing and fixing Overhead Shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome

Plated) with Rubit Cleaning System JAQUAR OHS-1709 & Shower Arm Casted 160mm Long Light Body Round Shape for Wall

Mounted Showers with Flange JAQUAR SHA-477 & Wall Mixer 3-in-1 System with Provision for both Hand Shower and

Twenty Two Thousand Seven Hundred

134 7.00 Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) 22725.00 Each

Twenty Five Rupees Only

JAQUAR QQP-7281PM, Towel Rack 600mm Long without Hangers, Stainless Steel JAQUAR ACN-1181FS approved ISI brand

quality, fixing in pieline and testing the same .etc., complete., as directed by EIC etc.

Providing and fixing U PVC SCH40 for cold water 20 mm dia (3/4)" Eighty Nine Rupees And Paise Eighty Nine

Providing and fixing PVC SWR pipes IS 13592 for Drain - 75 mmdia Three Hundred Eighty Six Rupees And Paise

Eighty Three Only

Providing and fixing PVC SWR P & S- Trap IS 14735 for Drain -110x110 Three Hundred Fifty Seven Rupees And Paise

Fifty Four Only

Providing and fixing Gun metal check or non-return fullway wheel valve. (A) 50mm dia. Eight Hundred Seventy One Rupees And

Paise Sixty Three Only

Providing laying and jointing PVC SWR pipes IS 13592 for Drain - 50 mmdia it's accessories. Three Hundred Thirty Seven Rupees And

Paise Thirty Four Only

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 Five Hundred Twenty Rupees And Paise

grams. Fifteen Only

Providing and fixing SS finish Angular Stop cock for wash basin like Jaquar code FUS-29053 One Thousand Seven Hundred Forty Two

Rupees And Paise Twenty Five Only

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. One Hundred Eighty Six Rupees And Paise

Eighty Three Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. One Hundred Eighty Six Rupees And Paise

Eighty Three Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. Two Hundred Three Rupees And Paise Eighty

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Four Hundred Twenty Rupees And Paise

Sixty Three Only

Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. Three Hundred Fourteen Rupees And Paise

Seventy Three Only

Providing and fixing Handicap wash down water closet European type WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP-

SIZE 365x545x360MM and P trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS braided

Twenty Three Thousand Five Hundred Thirty

147 2.00 hose 1.2 MT long pipe to water closet - JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern Body with Installations 23533.00 Each

Three Rupees Only

Kit & “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with Control Plate

Opal - JCP-CHR-152415,Toilet roll holder -Jaquar -ACN -1151N, including grab bar etc,complete

Providing and fixing Wash Basin vitreous china table top wash basin size 560mm x 450 mm in white colour. Like JAQUAR CNS-

WHT-903 SIZZE OF 425x340x175MM with single hole for pillar tape with CP or MS brackets painted white including cutting

holes and making good the same including (1) Providing and fixing SS waste coupling of 32 mm dia size half theread with

80mm height like jaquar -ALD - CHR-705 for wash basin with rubber plug (2) Providing and fixing SS bottle trap with internal

partition of 32mm size with 250mm &190mm long wall flange connection pipes and wall flange likejaquar ALD-769 L250X190 Thirteen Thousand Six Hundred Thirty Five

of approved quality with necessary fitting for wash basin (3) Providing and fixing SS Pillar cock with extention body like Rupees Only

JAQUAR FUS-CHR-29021N with necessary fittings etc. complete (4) Providing and fixing SS finish Angular Stop Cock quarter

turn like Jaquar code FUS-29053 with necessary fittings (5) Providing and fixing SS finish soap dispenser with metallic bottle

like Jaquar code-ACN-CHR-1135N,Towel ring -jaquar-CAN-1121BN etc. complete

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood

Eight Hundred Fifty Two Rupees And Paise

149 1.00 sheet and fixing to wooden pluge with C.P. brass screws and washers. 852.76 Each

Seventy Six Only

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B)

Six Hundred Sixteen Rupees And Paise Forty

150 1.00 600mm x 20mm size. 616.42 Each

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Seventy Two Rupees And Paise Sixty Five

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Only

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Ninety One Rupees And Paise Eighty Four

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Only

solvent, including cost of all materials.

Providing and fixing 25mm size UPVC Ball Valve with necessary Adhesive and fittings as directed by Engineer in charge. Five Hundred Forty Nine Rupees And Paise

Sixty Eight Only

Providing and fixing brass cromium plated surgical handle cock of size of 15mm dia as per PIU Approved brand list etc. One Thousand Eighty Eight Rupees And Paise

complete as directed by engineer incharge. Twenty One Only

Providing erecting and fixing three coated white Antibecterial Syntex PVC. (ISI) water tank of required capacity

155 5000.00 3.95 Three Rupees And Paise Ninety Five Only Liter

each with all necessary fittings and connection etc. complete on terrace.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x

One Thousand Two Hundred Forty Six

156 2.00 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type 1246.92 Each

Rupees And Paise Ninety Two Only

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Eight Hundred Fifty Seven Rupees And Paise

110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as Sixty Five Only

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

Two Thousand Nine Hundred Thirty Two

158 1.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with 2932.93 Each

Rupees And Paise Ninety Three Only

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm.

Three Thousand Four Hundred Twenty

159 1.00 height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as 3427.65 Each

Seven Rupees And Paise Sixty Five Only

Providing and fixing PUF Insulated continueous sandwich panels for walls of total thickness not less than 40 mm and width

m made out from continue line method on automatic plant.Panel shall have 0.35 mm thick pre coated GI sheet on both side of

Polyurethane Foam confirming to IS 12436:1988.The Precoated sheet shall be of minimum 240 mpa steel grade confirming to

IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 micron.The PPGI Sheet shall have plastic protective guard film of minimum 25 microns Four Thousand Nine Hundred Fifty Six

to avoid scratches during trasportation.The panels shall be vertically joined together by tongue and groove joints. The PU Rupees And Paise Six Only

Foam shall be self-extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including 0.25 mm

thick craft paper edging on both edges. The panels shall be fixed to the steel frame structure with minimum 5mm thick self

tapping GI screws of required length and nos. with minimum spacing of 300 mm c/c.

Providing, supplying, fabricating and erecting in position the structural steel for colums, grill, bars, truss, purlins, runners,

cleats, insert plate, base plate etc for all structural elements as per detail, made up from closed structural steel hollow sections

(RHS/SHS including rolled section ) as per IS 4923 of grade Yst 310 mpa - weather resistant of Tata Structural / sections or an

approved equivalent as per details / drawings/instructions including cutting, bending, jointing, connecting, welding and / One Hundred Sixteen Rupees And Paise

bolting and / riveting and fabricating and erecting in position etc complete for all levels as directed. The rate to include all Fifteen Only

necessary fixtures, fastening including welding rods of standard approvded quality etc for complete the job. The rate shall also

include the one coat of red lead paint, epoxy coat & necessary scaffolding etc. complete as directed

Providing and fixing 3 mm thick PVC sheets as signange and display of health signs/information of required size having retro

reflective letters/design as per requiement, fixing the same through approved adhesive etc. complete work shall e carried out Three Hundred Eighty Two Rupees And Paise

as per instruction of Engineer-in-charge (Approved make PVC foamed sheet only) (45 x 15 cms.) Seventy Nine Only

Providing & fixing colouron galvaniced steel, zinc / aluminium alloys coated sheet 0.5 mm. thick roofing fixed with gslvanised

Seven Hundred Thirty Four Rupees And

163 27.60 grom J or L hook bolts and bolt 8mm dia with bituman and impet washer filled with white lead etc. Excluding the cost of 734.19 SMT

Paise Nineteen Only

purlins rafter and trusses.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base

Five Hundred Eighty Two Rupees And Paise

164 696.00 frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 582.77 Pt.

Seventy Seven Only

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / wooden

Two Hundred Rupees And Paise Ninety Nine

165 286.00 box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with 200.99 Pt.

necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and accessories with earth continuity of following type

Eight Hundred Nine Rupees And Paise One

166 116.00 erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white 809.01 Pt.

front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Seven Hundred Twenty Five Rupees And

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or Paise Eighteen Only

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe Eight Hundred Ninety Four Rupees And Paise

erected with following type of accessories [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db Eighty Six Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC /

Six Hundred Twelve Rupees And Paise Six

169 220.00 Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected 612.06 Pt.

with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,

Three Hundred Nine Rupees And Paise Six

170 224.00 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with 309.06 Pt.

following type accessories Cat. III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed One Thousand One Hundred Thirty Three

1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch Rupees And Paise Twenty Two Only

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary One Hundred Sixty Rupees And Paise Fifty

connections as per site situation directed by Engineer In charge. Nine Only

(8) Computer RJ-45 socket Cat.III

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 e Seventy Six Rupees And Paise Seventy Six

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

One Hundred Sixty Rupees And Paise Fifty

174 47.00 connections as per site situation directed by Engineer In charge. 160.59 Ea

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat.III

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

175 670.00 connections. 20.20 Twenty Rupees And Paise Twenty Only Mtr.

[A] Conductor Size 0.5 mm

Providing & erecting main Distribution (MDF) indoor

One Thousand Seven Hundred Forty Seven

176 1.00 type, back mounted frame as per DoT standard approved with krone strips 1747.30 Ea.

Rupees And Paise Thirty Only

(c) Suitable for 50 pair

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant

facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through

Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility,

QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external

number, Once only ring device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward

Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide

One Lac Seventy Four Thousand Six Hundred

177 1.00 System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call 174606.78 Ea.

Six Rupees And Paise Seventy Eight Only

Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with

following capacities [[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

[E] No of Extension 128, No of Junctions 24, No of expandable ports : 512, Operators Console - 01 Compatible : ISDN and

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary One Hundred Sixty Rupees And Paise Fifty

connections as per site situation directed by Engineer In charge. Nine Only

(4) TV Co-axial Socket outlet Cat.III

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @

Thirty Nine Rupees And Paise Thirty Nine

179 225.00 suitable coverage overall sheathed with black PVC 39.39 Mtr.

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

One Hundred Fifteen Rupees And Paise

180 50.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 115.14 Mtr.

(f) One wire 10.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

One Hundred Seventy Seven Rupees And

181 50.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 177.76 Mtr.

Paise Seventy Six Only

(g) One wire 16.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

Two Hundred Ninety Five Rupees And Paise

182 75.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 295.93 Mtr.

Ninety Three Only

(h) One wire 25.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

Three Hundred Seventy Six Rupees And

183 80.00 control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts 376.73 Mtr.

Paise Seventy Three Only

(i) One wire 35.00 sq. mm

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of Seventy Eight Rupees And Paise Seventy

following size. Eight Only

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of One Hundred Four Rupees And Paise Three

following size. Only

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

One Hundred Forty Rupees And Paise Thirty

186 1900.00 colour for earth continuity of following size 140.39 Mtr.

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

One Hundred Eighty Four Rupees And Paise

187 1200.00 colour for earth continuity of following size 184.83 Mtr.

Eighty Three Only

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia Twenty Four Rupees And Paise Twenty Four

of pipes, in approved manner as directed Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

Thirty Three Rupees And Paise Thirty Three

189 2250.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia 33.33 Mtr.

of pipes, in approved manner as directed (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or

190 800.00 ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia 54.54 Fifty Four Rupees And Paise Fifty Four Only Mtr.

of pipes, in approved manner as directed (c) 32 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts

Twenty One Rupees And Paise Twenty One

191 220.00 etc. complete of following 21.21 Mtr.

sizes.(2) 25 mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

One Thousand One Hundred Fifty Two

192 6.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase 1152.41 Ea

Rupees And Paise Forty One Only

incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase

Two Thousand Nine Hundred Thirteen

193 8.00 incoming and single phase horizontal type outgoing Per phase isolation type (PPI) 2913.85 Ea

Rupees And Paise Eighty Five Only

(b) sheet steel double door

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase

Three Thousand Four Hundred Twelve

194 10.00 incoming and single phase horizontal type outgoing Per phase isolation type (PPI) 3412.79 Ea

Rupees And Paise Seventy Nine Only

(b) sheet steel double door

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and

One Hundred Twenty Three Rupees And

195 264.00 having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 123.22 Ea

Paise Twenty Two Only

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms

Three Hundred Six Rupees And Paise Three

196 20.00 to IS : 8828 in existing box having following capacity 306.03 Ea.

(A) 6 to 32 Amp. Cat-III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms

Three Hundred Twenty Five Rupees And

197 18.00 to IS : 8828 in existing box having following capacity 325.22 Ea.

Paise Twenty Two Only

(B) 40 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Six Hundred Fifty Five Rupees And Paise

198 13.00 to IS :8828 in existing box having following capacity 655.49 Ea.

Forty Nine Only

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Seven Hundred Thirty Six Rupees And Paise

199 28.00 to IS :8828 in existing box having following capacity 736.29 Ea.

Twenty Nine Only

(b)40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms

Eight Hundred Eleven Rupees And Paise

200 20.00 to IS :8828 in existing box having following capacity 811.03 Ea.

(c) 63 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

Two Thousand One Hundred Sixty Six

201 33.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2166.45 Ea

Rupees And Paise Forty Five Only

(i) 25 Amps.DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

Two Thousand Four Hundred Fifty Six

202 34.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2456.32 Ea

Rupees And Paise Thirty Two Only

(ii) 40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick

Two Thousand Nine Hundred Nineteen

203 25.00 action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected 2919.91 Ea

Rupees And Paise Ninety One Only

(iii) 63 Amps. DP Cat. III

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with One Thousand Nine Hundred Sixty One

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with Rupees And Paise Forty Two Only

necessary connections.

(A) Suitable for 100 Amp. Capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Three Thousand Two Hundred Two Rupees

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with And Paise Seventy One Only

necessary connections.

(B) Suitable for 200 Amp. capacity

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with Four Thousand Nine Hundred Nine Rupees

necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with And Paise Sixty One Only

necessary connections.

(C) Suitable for 300 Amp. capacity

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to Six Thousand Seven Hundred Ninety Rupees

work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 And Paise Twenty Three Only

G.M.S. housing. Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Eight Thousand Eight Hundred Sixty One

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Cat III Rupees And Paise Seventy Four Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at

V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Seventeen Thousand Eight Hundred Forty

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing. Cat III Three Rupees And Paise Sixty Seven Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and

above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply Twenty Three Thousand Forty One Rupees

50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Cat III And Paise Thirteen Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and

Twenty Seven Thousand Seven Hundred

above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply

211 4.00 27751.77 Fifty One Rupees And Paise Seventy Seven Ea

50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Cat III

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating

Twenty Two Thousand Two Hundred Fifty

212 2.00 mechanism A.C.23 duty confirming to IS for 22255.35 Ea

Five Rupees And Paise Thirty Five Only

(G) 400 A. Cat.III

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical

panel board necessary IP- 42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in- charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base

Fourteen Thousand Nine Hundred Two

213 7.00 Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end 14902.55 Sq.Mtr

Rupees And Paise Fifty Five Only

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating (The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The

panel shall be supplied with following approved manufacturers with following size. (B) The standard companies

switch gear shall be used and only manufacturers at CPRI approved factory. (i) with 350mm depth board

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical

panel board necessary IP- 42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in- charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base

Nineteen Thousand Three Hundred Eighty

214 3.00 Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end 19387.96 Sq.Mtr

Seven Rupees And Paise Ninety Six Only

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating (The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The

panel shall be supplied with following approved manufacturers with following size. (B) The standard companies

switch gear shall be used and only manufacturers at CPRI approved factory. (ii) with 550 mm. Depth

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding &

Seventy Seven Rupees And Paise Seventy

215 950.00 finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge 77.77 Kg.

with necessary grouting, cementing, plastering & finishing

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of

following Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power,

Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance

current, Power factor and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent

Fourteen Thousand One Hundred Twenty

216 2.00 energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current 14123.84 Ea

Three Rupees And Paise Eighty Four Only

Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC

45...65 Hz, 40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected with Forty Three Rupees And Paise Forty Three

necessary connections. Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing Two Hundred Seventy Four Rupees And

CRCA box duly secured with insulating materials connected to the meter. Paise Seventy Two Only

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with

multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating

oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners,

screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting

equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter

etc and heavy duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with asbestos

rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping and

drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the rated

system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage

regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated

steel base plate with antivibration mounting engine and alternator both connected to each other by flexible flange coupling

and with floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of

adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with Twelve Lac Eighty Six Thousand Four

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with Twelve Lac Eighty Six Thousand Four

219 1.00 provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, 1286492.55 Hundred Ninety Two Rupees And Paise Fifty Ea.

sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 Five Only

mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not

more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of

continous running capacity on full load . Erection, commissioning and satisfactory testing as per requirement with first filling of

fuel (minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. &

with obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new

CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC

(Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)

(M) Continuous rating of 125 KVA ,BHP not less than 197 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator

contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air

circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons.

Manual start push button. frequency meter. Engine hour meter. Two earthing studs.

One Lac Twenty One Thousand Two

220 1.00 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V 121201.01 Ea.

Hundred One Rupees And Paise One Only

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(C) AMF Control Panel for125 KVA3 phase DG Set

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for

221 5.00 69.69 Sixty Nine Rupees And Paise Sixty Nine Only Ea.

MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary Twenty Five Rupees And Paise Twenty Five

connections as per site situation directed by Engineer In charge. Only

(7) Blank Plate Single

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

223 150.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 106.05 One Hundred Six Rupees And Paise Five Only Mtr.

(B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

One Hundred Twenty Eight Rupees And

224 180.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 128.27 Mtr.

Paise Twenty Seven Only

(C) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

One Hundred Fifty Seven Rupees And Paise

225 150.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 157.56 Mtr.

(D) 3 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Two Hundred Sixty Four Rupees And Paise

226 180.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 264.62 Mtr.

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Three Hundred Forty One Rupees And Paise

227 140.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 341.38 Mtr.

Thirty Eight Only

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

Six Hundred Forty Eight Rupees And Paise

228 250.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 648.42 Mtr.

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be

One Hundred Forty Rupees And Paise Thirty

229 276.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 140.39 Mtr.

(A) 4 core 4 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be

One Hundred Fifty One Rupees And Paise

230 220.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 151.50 Mtr.

(B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be

One Hundred Sixty Eight Rupees And Paise

231 610.00 laid on wall with necessary clamps or in existing trench / pipe of following size of cables 168.67 Mtr.

Sixty Seven Only

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe of One Hundred Eighty Four Rupees And Paise

following size of cables Eighty Three Only

(A) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe of Two Hundred Twenty Nine Rupees And Paise

following size of cables Twenty Seven Only

(B) 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Thirty Three Rupees And Paise Thirty Three

234 13.00 complete with out going tails, insulating tape etc for following size of cables. 33.33 Ea

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Thirty Eight Rupees And Paise Thirty Eight

235 12.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Ea

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Thirty Eight Rupees And Paise Thirty Eight

236 21.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Ea

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Forty Seven Rupees And Paise Forty Seven

237 14.00 complete with out going tails, insulating tape etc for following size of cables. 47.47 Ea

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Seventy Five Rupees And Paise Seventy Five

(B) 3 & 1/2 core 35/50 Sq. mm Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. One Hundred Forty Rupees And Paise Thirty

(E) 3 & 1/2 core 120 Sq. mm Nine Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

240 84.00 6.06 Six Rupees And Paise Six Only Ea.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

241 84.00 13.13 Thirteen Rupees And Paise Thirteen Only Ea.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

242 55.00 15.15 Fifteen Rupees And Paise Fifteen Only Ea.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

243 14.00 20.20 Twenty Rupees And Paise Twenty Only Ea.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

244 16.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 45.45 Forty Five Rupees And Paise Forty Five Only Ea.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Eight Thousand Six Hundred Thirty Six

Voltage drop:- Rupees And Paise Fifty One Only

< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel Seventy Seven Rupees And Paise Seventy

board, Motors etc. using proper clamp. Seven Only

Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Seven Hundred Ninety Four Rupees And

Paise Eighty Seven Only

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with

One Thousand Nine Hundred Forty Eight

248 116.00 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. 1948.29 Ea

Rupees And Paise Twenty Nine Only

down rod erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for One Hundred Eight Rupees And Paise Seven

fan complete with proper insulation without leakage and earthing. Only

Supplying & erecting fan hook box of 10 mm

One Hundred Eight Rupees And Paise Seven

250 116.00 M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 108.07 Ea

16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

251 116.00 18.18 Eighteen Rupees And Paise Eighteen Only Ea.

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & One Thousand Three Hundred Sixty Six

square frame. 200mm with 1350RPM Cat.II Rupees And Paise Fifty Three Only

Providing recess in wall or window frame suitable for erection of Exhaust fan complete with plastering and colour

One Hundred Eighty Nine Rupees And Paise

253 35.00 washing to match the colour of the wall or window complete with expanded metal in order to render the fitting in 189.88 Ea

Eighty Eight Only

accessible and the room water-proof.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED Five Hundred Thirty Five Rupees And Paise

LED driver efficiency > 85 % Thirty Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 One Hundred Twelve Rupees And Paise

255 154.00 (A) LED Lamps integral type, with PC diffuser 112.11 Ea

suitable LAMP holder

(ii) 5 to 8 watts cat III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM- Five Hundred Eighty Nine Rupees And Paise

80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer Eighty Four Only

incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV cat - III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT

3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & One Thousand Seven Hundred Ninety Four

257 50.00 LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer 1794.77 Ea

Rupees And Paise Seventy Seven Only

incharge may select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane

front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV cat - III

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light indicating lamp with Red light button One Hundred Forty Eight Rupees And Paise

to attend the call suitable for 240 v 50 c/s supply to be erected. Forty Seven Only

Providing & Erecting full SS Body (SS 304) Split type water cooler having storage capacity 160 to 175 Ltr.(Tank SS 304) &

Cooling capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet temp. of the water should drop by 150C within a

hour,The water cooler should be comprising of hermetically sealed Reciprocating compressor with R134A, fan motor, Copper

Condensing unit with company fabricated Outdoor Unit water tank surrounded by evaporating coil, thermostats, relay Sixty Seven Thousand Two Hundred Twenty

etc.complete with necessary copper tube & Insulation, M.S Chanel Stand with Painting for water tank & M.S. Powder Coated Six Rupees And Paise Sixty One Only

Stand for Outdoor unit with Installation. With DPELCB and 4 Way DB Box with accessory Three core Cord for connection.

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame,

prefilter housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH

capacity & erected as directed

[F] 500 LPH with 3 phase Raw water pump of 1000LPH @ 3.0 kg/cm2 (1No - Kirloskar /CRI /Lubi), Dual media filter 13"x54" - One Lac Seventy Five Thousand Eight

260 2.00 (1No), Micron catridge filter 20" x 4.0"-1No, High pressure pump 1000LPH @ 11kg/cm2 - (1No - lubi/ Shimge/ CRI), RO 175895.54 Hundred Ninety Five Rupees And Paise Fifty Ea.

Membrane housing with RO membrane of 40*40 - (2 Nos), RO pressure tube 4" x 2E -(1No), 0-2400 LPH Rotameter ( 2Nos), , Four Only

Dosing pump 0 -6 LPH - (1 No),. with 100 Ltr Dosing tank - (1 No), with Recovery Rate 50%.

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free

container housed in ABS plastic body insulated with glass wool / puff insulation and 3 Kw heating

Five Thousand Six Hundred Thirty Nine

261 5.00 elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto reset indication lamps, 5639.84 Ea.

Rupees And Paise Eighty Four Only

thermal cut-out, safety valve fusible plug etc. Premium Category

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

SITC of Analogue Addressable Smoke Sensor which is fully compatible with Analogue Addressable Protocol, having removable

high performance chamber with Twin fire LED's allow 360 degree viewing, User selectable sensitivity modes 1% to 4.5% obs/m,

Four Thousand Two Hundred Ninety Rupees

262 90.00 Incorporate Optical elements, lock mechanism (sensor to base), Electronically addressed, Pulsing/non-pulsing controlled from 4290.48 Ea

And Paise Forty Eight Only

panel. Approved by LPCB & VdS. (Including Five year free maintenance with guarantee)

SITC of sensor isolator mounting base, includes stainless steel contacts, slim profile - only 8mm, quick connection via square

Two Thousand Eight Hundred Sixty Rupees

263 3.00 cable clamps, facility for remote indicator, Approved by LPCB (Including Five year free maintenance with guarantee) 2860.32 Ea

And Paise Thirty Two Only

SITC of Analogue Addressable Manual Call Point with Integral Short Circuit Isolator, Analogue Addressable Protocol having, Bi-

coloured status LED (red for alarm, amber for (short-circuit), Non-frangible element fitted as standard (conforms to EN54), Seven Thousand One Hundred Fifty Rupees

pulsing/non-pulsing can selectable via panel, Electronically addressed, Approved by LPCB. (Including Five year free And Paise Eighty Only

maintenance with guarantee)

SITC of addressable loop powered Base sounder with integral Beacon, includes 51 user- selectable tones (all tones EN54-3

compatible), variable sound output 50 ~ 98 dB(A) (±2 dB(A)) output at 1 metre, Auto shut down feature prevents noise Eight Thousand Nine Hundred Thirty Eight

pollution, 'O' rated beacon to EN-23, IP21 rated for internal use, sounder and beacon can operate independently, Approved by Rupees And Paise Fifty Only

LPCB (Including Five year free maintenance with guarantee)

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having One Hundred Forty Six Rupees And Paise

XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Forty Five Only

SITC of Active Repeater Panel to be integrated with Fire Alarm Control Panel,larger display Full colour 800 x 480 LCD with

One Lac Fifty Three Thousand Seven

resistive touch screen and automatic back-light dimming and the status of any Fire/Fault of Integrated Fire Alarm Panels,

267 1.00 153742.20 Hundred Forty Two Rupees And Paise Twenty Ea.

Panel should compliant with EN54-2, EN54-4 and Approved by LPCB (Including Five year free maintenance with guarantee)

SITC of Microprocessor based Net-workable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant

with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have expandable capacity upto 4 loops. The

Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and

One Lac Seven Thousand Two Hundred Sixty

268 1.00 Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base 107262.00 Ea

Two Rupees Only

sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger.

Approved by LPCB (Including Five year free maintenance with guarantee)

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost

charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating

capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, Three Lac Ninety Seven Thousand Three

269 2.00 over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly 397324.91 Hundred Twenty Four Rupees And Paise Ea

powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for Ninety One Only

momentary load.

(J) 20 KVA 3 - phase with 1Hr Backup

Supplying submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than

H.P. with following capacity .. Twenty Four Thousand Six Hundred Eleven

(B) (16 stage) 140 to 180 LPM discharge at 96 to 69 mtrs. head respectively suitable for 50mm dia. delivery pipe cat III Rupees And Paise Sixty Eight Only

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of

One Hundred Seventy Two Rupees And Paise

271 40.00 following Size. 172.71 Mtr.

Seventy One Only

(D) 3 Core x 6 Sq. mm.

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following

Ten Thousand Five Hundred Seventy Four

272 2.00 (C) 1 H.P. single phase open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. 10574.70 Ea.

Rupees And Paise Seventy Only

Delivery pipe with control panel.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase submersible

Twenty Thousand Six Hundred Twenty One

273 2.00 [D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr 20621.17 Ea.

Rupees And Paise Seventeen Only

head suitable for 50/65 mm dia delivery pipe

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per instruction of Engineer in

Two Thousand Three Hundred Fifty Five

274 3.00 charge on site complete with wiring connection with existing wires , with copper conductor from pump to upper and lower 2355.32 Ea.

Rupees And Paise Thirty Two Only

Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses.

Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single phasing

preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable)

protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage Seven Thousand Two Hundred Fifty Rupees

limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high And Paise Seventy Nine Only

voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be

erected on angle iron frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make only)

(A) DOL up to 5.0 H.P.

Supplying and erecting approved make Conical Pole (Standard ) Made from HR sheet steel. The pole should be made as per IS.

and shall be coated with hot dip galvanizing as per IS 2629/2633/4759 with required base plate and integral Junction box

consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

Six Thousand Four Hundred Three Rupees

276 20.00 terminal and arrangement for cable terminationas erected on suitable foundation (included) with necessary GI nut-bolts/J- 6403.40 Ea

And Paise Forty Only

Bolts. as per details given by manufacturer considering site requirement.The length of poles are as below.

(C) 5 Mtr. Long 65mm Top X140 mm bottom dia, 3mm thickness.

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with

Five Hundred Sixty One Rupees And Paise

277 20.00 suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted 561.56 Ea

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

Eight Hundred Ninety Eight Rupees And

278 20.00 requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection 898.90 Ea

Paise Ninety Only

on pole with cable clamps& earth bolt of following size of box.

(A) 300mm x 200mm x 100mm [deep]

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> Four Thousand Two Hundred Forty Eight

100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM- 79 & LM-80 certificates)(NOTE: Below Rupees And Paise Six Only

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-lll

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with suitable brass studs with nuts, One Hundred Forty Six Rupees And Paise

washers and clamps of size 25mm x 3mm suitable for pole painted with one coat of red lead paint. Forty Five Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time Three Thousand One Hundred Sixty Eight

1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire Rupees And Paise Thirty Seven Only

proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per

One Thousand Eight Hundred Eighty Three

282 1.00 direction Cat III 1883.65 Ea

Rupees And Paise Sixty Five Only

(B) 2 pole 250V 32 Amp.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following

283 100.00 size to be erected as directed. 58.58 Fifty Eight Rupees And Paise Fifty Eight Only Mtr.

(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site requirement. Pipe dia as following. Two Hundred Forty Nine Rupees And Paise

(C) 40 mm dia. Forty Seven Only

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with necessary coupling buch

buried in specially prepared earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For panel)

Nine Hundred Ninety Four Rupees And Paise

285 20.00 For using salt and charcoal / coke as required 994.85 Ea.

Eighty Five Only

for pipe type earthing.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of

286 450.00 62.62 Sixty Two Rupees And Paise Sixty Two Only Rmt

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

One Hundred Twenty Three Rupees And

287 20.00 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark cat III 123.22 Ea.

Paise Twenty Two Only

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or

Seventy Four Rupees And Paise Seventy Four

288 100.00 locating the fault all over the run and back filling the same and making the surface as normal ground. 74.74 Mtr.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back

289 150.00 55.55 Fifty Five Rupees And Paise Fifty Five Only Mtr.

filling the same and making the surface as normal ground.

Supplying and erecting approved make GRP / FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame

Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant -

Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index

– Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile One Hundred Eighty Rupees And Paise

Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard Seventy Nine Only

ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as

per Standard ASTM D 695- Barcol Hardness – 50 –

(C) Width - 100mm, Pultruded “C” Channel with 35mm Sides 3mm Thickness, Loading 12 Kg./Mtr.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying and erecting approved make GRP / FRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame

Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 –

60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant -

Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index

– Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Two Hundred Thirty Two Rupees And Paise

Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard Thirty Only

ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as

per Standard ASTM D 695- Barcol Hardness – 50 – 65(D) Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm

Thickness, Loading 15 Kg./Mtr.

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC

292 0.00 pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with 0.00 Zero Rupees Only 0.00

necessary core cutting. (2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(B) for 1.5 ton capacity - Premium Cat. Sixty Thousand Seven Hundred Nine Rupees

And Paise Eight Only

(C) for 1.7 to 2 ton capacity-Premium Cat.

Seventy Nine Thousand Six Hundred Twenty

Rupees And Paise Thirty Two Only

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens Dome Type Camera, H.265 4MP IR Turret Dome N/W

Camera, Manual Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True

Thirteen Thousand Five Hundred Twenty

295 15.00 day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Built in MIC, Cyber Security, Basic intelligent 13520.87 Ea.

Rupees And Paise Eighty Seven Only

video analytics, Audio In, NDAA Compliance, UL, CE, FCC Certified (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of 4MP Varifocal Lens Bullet Camera, H.265 4MP IR Bullet N/W Camera, Manual

Varifocal 2.8-12mm, 50M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True day/night, Digital

Thirteen Thousand Five Hundred Twenty

296 5.00 WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security, Basic intelligent video analytics, NDAA 13520.87 Ea.

Rupees And Paise Eighty Seven Only

Compliance, UL, CE, FCC Certified (Including Five year free maintenance with guarantee)

Supply, Installation, Testing and Comissioning of 64 Channel Network Video Recorder (NVR), Dual OS design, HDD Hot Swap

with RAID support, N+1 hot spare configuration, Support 16CH@2MP, H.265/H.264 Video Compression, HDMI, VGA output, up

Three Lac Seventeen Thousand Six Hundred

to 8 SATA interface each with max 10 TB support and 1 eSATA, 16-ch synchronous playback at up to 1080p resolution, Gigabit

297 1.00 317671.26 Seventy One Rupees And Paise Twenty Six Ea.

Ethernet network interfaces, bandwidth 320 mbps, CE FCC, BIS, Operating Temp -10 deg to 50 deg C, USB and serial Interface,

RAID supported (Including Five year free maintenance with guarantee)

SITC of SCREEN SIZE 80 cm diagonal (32” INCH), RESOLUTION HD (1366*768), USB INPUT (2.0 SUPPORT) 2*Side(USB2.0), HDMI

INPUT 3*Side(HDMI 1.4), USB DEVICE SUPPORT USB Supported HDD, HOTEL MODE Yes, Basic, BLUETOOTH Yes (Ver. 4), WIFI

Sixty Thousand Sixty Six Rupees And Paise

298 2.00 TYPE(STANDARD) 802.11a/b/g/n 2.4G 2T2R, Built-in, WIFI BAND TYPE 2.4GHz, OS & VERSION INFO Android 'P' - 9.0, MEMORY 60066.72 Ea.

Seventy Two Only

FLASH 8GB EMMC, RAM 1.5GB , DDR3 2133 Mhz. (Including Five year free maintenance with guarantee)

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+

Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget Thirty One Thousand Nine Hundred Ninety

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Six Rupees And Paise Eighty Only

Supply, Installation, Testing and commissioning of 4 TB Surveillance Series Hard disk supporting 24X7 operational efficiency Fifteen Thousand Eight Hundred Twenty One

Rupees And Paise Sixty Five Only

Providing & Erecting Netwrok rack with following capacity with Necessary cooling fan,Cable manager,6A PDU,equipment rack

Thirteen Thousand Six Hundred Thirty Five

301 1.00 with necessary mounting accessories. 13635.00 Ea.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

302 800.00 62.62 Sixty Two Rupees And Paise Sixty Two Only Rmt

following size.

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of Eighty Two Rupees And Paise Eighty Two

following size. Only

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

One Hundred Twelve Rupees And Paise

304 400.00 colour for earth continuity of following size 112.11 Rmt

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

Two Thousand Three Hundred Thirty Nine

305 1.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase 2339.16 Each

Rupees And Paise Sixteen Only

incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (i)4 way

Main Fire Hydrant Pump- Electric Motor Driven: SITC of: Back pull out type -Single Stage, Self Mriming, Centrifugal Pump for

Main Fire Pump with Electric Motor, Base frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410.

Flow Capacity: 2280 LPM Head: 65 mtr Speed: 2900 Approx Pump shall be capable of furnishing not less than 150% of rated

Two Lac Ninety Six Thousand Eight Hundred

306 1.00 capacity at a head not less than 65% of rated head The shut off head shall not exceed 120% of rated head. UOM:-Price Per 296808.70 Set

Eight Rupees And Paise Seventy Only

Complete set of Pump + Motor + Accessories.

Note:-01. Minor civil work like tank hole/ Core Cutting etc. are in bidders scope. Location: In Pump Room Make: Kirloskar /

Jockey Fire Pump- Electric Motor Driven: SITC of: Back Pull-out End Suction Type -Single Stage, Self Priming, Centrifugal Pump

for Jockey Fire Pump with Electric Motor, Mechanical Seal, Base-frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft-

SS 410, Sleeve-SS410. Flow Capacity: 180 LPM Head: 65 mtr Speed: 2900 Approx

Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65% of rated head The shut One Lac Seven Thousand Seven Hundred

off head shall not exceed 120% of rated head. UOM:-Price Per Complete set of Pump + Motor + Accessories. Note:-01. Minor Fifty Six Rupees And Paise Ninety Only

civil work like tank hole/ Core Cutting etc. are in bidders scope. Location: In Pump Room Make: Kirloskar / Lubi

Standby Fire Pump- Diesel Engine Driven SITC of: Diesel Engine driven Standby Pumping System complete with,diesel engine,

Back Pull-out Type Single Stage, Self Priming, Centrifugal Pump, Couplings & Base-frame: MOC:- Pump Casing-CI, Impeller-

Bronze, Shaft-SS410, Sleeve- SS410. Flow Capacity: 2280 LPM Head: 65 mtr Speed: 2900 LPM

Five Lac Thirteen Thousand Five Hundred

308 1.00 Diesel Engine includes 100 ltr diesel tank, battery, battery charger, engine oil and coolant. UOM:-Price Per Each Set. Note:-01. 513595.10 Set

Ninety Five Rupees And Paise Ten Only

Minor civil work like tank hole/ Core Cutting etc. are in bidders scope. Location: In Pump Room Make: Kirloskar / Lubi

Fire Pump Control Panel- Auto and Manual Type. Supply, Installation and Testing of: Electric Control Panel for Electric Motor

Driven Main Fire Pump and Jockey Fire Pump. all pumps can be Start Automatically (by Pressure Switch) & Manually. Design As Eighty Eight Thousand Seven Hundred Eighty

per the Detail Specifications given. UOM:-Price Per Set. Location: In Pump Room Make: Kirloskar / Lubi Nine Rupees And Paise Ten Only

Air Vessel: SITC of Pressurized Air Vessel f Size 450 mm Dia x 2000 mm long fabricated from 10 mm thick MS Plate with 25 mm Forty Thousand Six Hundred Fifty Two

drain valve, air release valve with ball valve on top and isolation valve. Rupees And Paise Fifty Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Five Hundred Thirty Five Rupees And Paise

311 30.00 FRLS type with necessary clamps or in existing trench / pipe of following size of cables - 3.5 core 70 Sq. mm 535.30 Rmt

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete

Seven Hundred Forty Two Rupees And Paise

312 8.00 with out going tails, insulating tape etc for following size of cables. 742.35 No.

Thirty Five Only

- 3.5 core 70 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Nine Hundred Thirty Nine Rupees And Paise

313 16.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. - 70 Sq.mm. 939.30 No.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Two Hundred Forty Four Rupees And Paise

314 30.00 FRLS type with necessary clamps or in existing trench / pipe of following size of cables - 4 core 16 Sq. mm 244.42 R.mtr

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete Five Hundred Ninety Two Rupees And Paise

with out going tails, insulating tape etc for following size of cables. - 4 core 16 Sq. mm Eighty Seven Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

316 6.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. - 16 Sq.mm. 707.00 Seven Hundred Seven Rupees Only No.

Pressure Gauge with Siphon Tube and Cock. Supply, Installation and Testing of: Pressure Gauge with Siphon Tube and

One Thousand One Hundred Sixty One

317 6.00 Cock.MOC:-4” Dial- Glycerin filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube andBrass Cock. Size:-Dial: 4” (100 1161.50 No.

Rupees And Paise Fifty Only

mm) Range: 0 – 16 Bar (kg/cm2) UOM:-Price Per Unit

Pressure Switch with Siphon Tube and Cock. Supply, Installation and Testing of: Pressure Switch with Siphon Tube and Cock.

One Thousand Two Hundred Seventy Seven

318 4.00 Size:- Range suitable for System Design Pressure. UOM:-Price Per Unit 1277.65 No.

Rupees And Paise Sixty Five Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), Three Thousand Four Hundred Thirteen

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: Rupees And Paise Eighty Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Under Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint, Wraping-Coating etc.), One Thousand Nine Hundred Eight Rupees

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: And Paise Ninety Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables Three Thousand Six Hundred Eighty One

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 200 mm Rupees And Paise Forty Five Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables Two Thousand Seven Hundred Forty Six

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 150 mm Rupees And Paise Nineteen Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables One Thousand Eight Hundred Twenty Five

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 100 mm Rupees And Paise Seven Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables One Thousand Three Hundred Forty Eight

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 80 mm Rupees And Paise Thirty Five Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables One Thousand Fifty Five Rupees And Paise

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 65 mm Forty Five Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables Nine Hundred Rupees And Paise Ninety Two

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 50 mm Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables Five Hundred Ninety Five Rupees And Paise

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 40 mm Ninety Only

Pipe Laying. Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe. With necessary Pipe Fitments

(Flanges, Bands, Socket etc.), MS Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables Four Hundred Twenty Two Rupees And Paise

(Welding Rod, etc.) and Labour Charge. Quality: GI C-Class (Heavy). Paint: UOM:-Price Per Running Meter Size: 25 mm Eighteen Only

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). Sixty One Thousand Four Hundred Forty

Standard: ISI Marked. Three Rupees And Paise Thirty Five Only

UOM:-Price Per Each No. Size: 200 mm

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). Thirty Six Thousand Four Hundred Seventy

Standard: ISI Marked. One Rupees And Paise Ten Only

UOM:-Price Per Each No. Size: 150 mm

Gate /SluiceValve Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type) Valve with necessary

pipe fitments, hardware and consumables. MOC:-Body: Cast Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). Eighteen Thousand Four Hundred Thirty Two

Standard: ISI Marked. Rupees And Paise Fifty Only

UOM:-Price Per Each No. Size: 80 mm

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

Six Thousand Six Hundred Fifty Rupees And

332 2.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm 6650.85 No.

Paise Eighty Five Only

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

Two Thousand Eight Hundred Seven Rupees

333 1.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 80 mm 2807.80 No.

And Paise Eighty Only

Check Valve Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with necessary pipe fitments, hardware

One Thousand Seven Hundred Eighty Seven

334 1.00 and consumables. MOC:-Body: Cast Iron (With Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 50 mm 1787.70 No.

Rupees And Paise Seventy Only

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Four Thousand Three Hundred Fifty Eight

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 150 mm Rupees And Paise Fifteen Only

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Two Thousand Nine Hundred Thirty Nine

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 100 mm Rupees And Paise Ten Only

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. Two Thousand Two Hundred Forty Two

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 80 mm Rupees And Paise Twenty Only

Butterfly Valve Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, hardware and consumables. One Thousand Five Hundred Eighty Rupees

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price Per Each No. Size: 50 mm And Paise Sixty Five Only

Strainer. Supply, Installation and Testing of: Y Type Strainer with necessary pipe fitments, hardware and consumables. MOC:-

339 1.00 Body: Cast Iron, Mesh: SS-304. Working Pressure: 10 Bar UOM:-Price Per Each No. Size: 200 mm 40400.00 Forty Thousand Four Hundred Rupees Only No.

Air Release Valve- 25 mm Supply, Installation and Testing of: Air Release Valve Check Valve with necessary pipe fitments, One Thousand One Hundred Eighty Six

hardware and consumables. MOC:-Body: Gunmetal / SS. UOM:-Price Per Each No. Rupees And Paise Seventy Five Only

Fire Hydrant Landing Valve (Stainless Steel (SS-304), ISI Marked):

Supply, Installation and Testing of: Fire Hydrant Landing Valve with necessary pipe fitments, hardware and consumables.MOC:-

Three Thousand Seven Hundred Seventy

341 5.00 Body: Stainless Steel (SS-304), Working Parts: Stainless Steel (SS-304), Coupling: Stainless Steel (SS-304), Standard: -ISI 3772.35 No.

Two Rupees And Paise Thirty Five Only

Size:-63 mm (Flange End: NB 75 mm, PCD 160 mm) UOM:-Price Per Each No.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Fire Hose Pipe (Delivery Hose)- 63 mm x 15 m Supply, Installation and Testing of: Fire Hose with Hose Couplings. RRL (ISI Mark-

Three Thousand One Hundred Thirty One

342 5.00 Type A) Fire Hose. Hose Couplings: ISI Marked Stainless Steel. With SS Wire Binding. Standard: - ISI Marked & TAC Approved 3131.00 No.

Hose. Size:-63 mm dia x 15m long Hose. UOM:-Price Per Each Set.

Cabinet For Fire Hose (Hose Box)- Double Type Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box) suitable to

accommodate 02 no. of 15 m long fire hoses and 01 no. of nozzle. With Lock-n-key facility. Wall Mounting Design. MOC: 16 Two Thousand Six Hundred Sixty One

Gauge MS Box with Powder Coating Standard: - As per Guidelines. Size:- Suitable for 02 nos. of 15 m long hoses. UOM:-Price Rupees And Paise Thirty Five Only

Fire Hose Nozzle- Short Branch Pipe Nozzle. Supply, Installation and Testing of: Short Branch-pipe Nozzle. MOC: Stainless Steel

One Thousand One Hundred Sixty One

Rupees And Paise Fifty Only

Standard: ISI Marked, Heavy Quality. Size:- 63 mm X 20 mm UOM:-Price Per Each No.

Fire Hose Reel Set (ISI)-19 mm x 30 m -Rubber Hose. Supply, Installation and Testing of: Fire Hose Reel Set with necessary pipe

fitments, hardware and consumables. MOC:-Drum: 16 G Powder Coated MS, Hose: 19 mm X 30 m heavy-duty RUBER hose. Five Thousand Five Hundred Thirty Nine

Shut-off Nozzle: SS-304. With Control Valve: SS- 25mm Ball Valve. Standard: ISI Marked. Heavy Quality. Size:-19 mm dia x 30m Rupees And Paise Eighty Five Only

long Hose. UOM:-Price Per Each No.

Fire Service In-let (In-let Connection for Fire Brigade)-4 Way Type.

Supply, Installation and Testing of: Fire Service Inlet with necessary hardware and consumables. MOC:-Body: Heavy-duty CI. Five Thousand Seven Hundred Sixteen

Couplings/NRV: Gunmetal. Standard: -Made As per IS Standard- Heavy duty quality. Size:-Couplings: 63 mm, 150 mm E-table Rupees And Paise Sixty Only

Flange End. UOM:-Price Per Each No.

Sprinkler Head/ Nozzle. Supply, Installation and Testing of: K 5.6 Pendent type Standard Response Sprinkler rating of

One Hundred Twenty Seven Rupees And

347 150.00 deg.C. with required accessories. MOC:-Brass Standard: UL Listed Size:-15 mm (1/2”) UOM:-Price Per Each No. 127.26 No.

Paise Twenty Six Only

Flow Switch Supply, Installation and Testing of: Flow Switch with necessary pipe fitments, hardware and consumables. UOM:- Four Thousand Three Hundred Fifty Eight

Price Per Each No. With all wiring/ cabling up to control panel and all electrification. Rupees And Paise Fifteen Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall

One Hundred Eighty Six Rupees And Paise

349 140.00 FRLS type with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (a) 3 core 186.85 Rmt

Eighty Five Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete Five Hundred Ninety Rupees And Paise

with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5 Sq. mm Eighty Five Only

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high

Six Hundred Seventy Three Rupees And

351 24.00 pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 673.67 No.

Paise Sixty Seven Only

Providing and fixing, testing and commissioning of Drainning Valve 50mm dia with by pass drain connection as required. One Thousand Five Hundred Eighty Rupees

And Paise Sixty Five Only

Providing and fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS

Twenty Six Thousand Four Hundred Twenty

353 2.00 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder 26426.65 No.

Six Rupees And Paise Sixty Five Only

Fire Extinguisher- ABC Powder type, 6 kg. Supply, Installation and Testing of: ABC Powder Fire Extinguisher necessary

Two Thousand Six Hundred Seventy One

354 6.00 hardware and consumables. Stored Pressure Mechanism. Charged with MAP-50 % (ABC) Dry Powder. With wall mounting 2671.45 No.

Rupees And Paise Forty Five Only

clamp. Size:-6 kg Powder. UOM:-Price Per Each No.

Fire Extinguisher- CO2 Gas type, 4.5 kg. Supply, Installation and Testing of: CO2 Gas Fire Extinguisher with necessary hardware

Five Thousand Five Hundred Nineteen

355 6.00 and consumables. Standard: - Confirming to IS: 15683-2006 with ISI Mark. 5519.65 No.

Rupees And Paise Sixty Five Only

Size:-4.5 kg UOM:-Price Per Each No.

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly

Three Thousand Two Hundred Fifty Two

356 2.00 painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on 3252.20 No.

Rupees And Paise Twenty Only

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm

Four Thousand Six Hundred Forty Six Rupees

357 1.00 height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly 4646.00 No.

painted with one coat of red lead and two coats of approved enamelled silver paint.

Safety Signage- Night Glow Type: SIRC of: Single Side Printed Night Glow (Glow in Dark ) Safety Signage. Printed on PVC sticker Five Hundred Eighty Rupees And Paise

sheet and pasted on 3-5 mm thick PVC foam sheet. Size: 10” X 10”. Seventy Five Only

RCC Hume Pipe: Providing and Laying NP3 RCC Hume Pipe of 300 mm at road crossing Eight Hundred Fifty Eight Rupees And Paise

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Approval of Fire Hydrant & Entire Fire Protection System from Local Fire Authority and any other relevant statutory authority

at initial and various other stages of work, including preparation of report/drawings as per fire authority requirement.

360 1.00 101000.00 One Lac One Thousand Rupees Only No.

Contractor shall include cost of all liason work which are not explicitly mentioned above but are mandatory to have fire

authority approval (any statutory charges will be paid extra).

Medical Grade Copper Pipe : 42mm OD X 1.2mm thick One Thousand Eight Hundred Fifty Rupees

362 190.00 Medical Grade Copper Pipe : 28mm OD X 0.9mm thick 950.00 Nine Hundred Fifty Rupees Only MTRS

363 440.00 Medical Grade Copper Pipe : 22mm OD X 0.9mm thick 700.00 Seven Hundred Rupees Only MTRS

364 890.00 Medical Grade Copper Pipe : 15mm OD X 0.9mm thick 450.00 Four Hundred Fifty Rupees Only MTRS

365 420.00 Medical Grade Copper Pipe : 12mm OD X 0.7mm thick 340.00 Three Hundred Forty Rupees Only MTRS

Gas Outlet Points/ Terminal Unit : Oxygen

366 79.00 4800.00 Four Thousand Eight Hundred Rupees Only NOS

Gas Outlet Points/ Terminal Unit : Nitrous Oxide

367 11.00 4800.00 Four Thousand Eight Hundred Rupees Only NOS

Gas Outlet Points/ Terminal Unit : Air 4 bar

368 32.00 4800.00 Four Thousand Eight Hundred Rupees Only NOS

Gas Outlet Points/ Terminal Unit : Vacuum

369 70.00 4800.00 Four Thousand Eight Hundred Rupees Only NOS

370 4.00 Gas Outlet Points/ Terminal Unit : AGSS 8000.00 Eight Thousand Rupees Only NOS

371 13.00 Gas Outlet Points/ Terminal Unit : CO2 8000 Eight Thousand Rupees Only NOS

Two gas Area Valve Service Unit

372 3.00 11500 Eleven Thousand Five Hundred Rupees Only NOS

Three gas Area Valve Service unit

373 3.00 12500 Twelve Thousand Five Hundred Rupees Only NOS

Five gas Area Valve Service Unit

374 2.00 20600 Twenty Thousand Six Hundred Rupees Only NOS

Medical Gas Area Alarm for 2 services.

375 2.00 11500 Eleven Thousand Five Hundred Rupees Only NOS

Medical Gas Area Alarm for 3 services

376 3.00 12500 Twelve Thousand Five Hundred Rupees Only NOS

Medical Gas Area Alarm for 5 services

377 1.00 20600 Twenty Thousand Six Hundred Rupees Only NOS

378 1.00 Oxygen Manifold (2x10) along with tailpipe, NRV and fittings. 85000 Eighty Five Thousand Rupees Only SET

Oxygen Emergency Manifold (2x2) along with tailpipe, NRV & fitting Thirty Five Thousand Eight Hundred Rupees

380 30.00 BPC flowmeter bottle along with humidifier bottle 950 Nine Hundred Fifty Rupees Only SET

N2O Manifold (2x3) along with tailpipe, NRV and fittings.

381 1.00 40800 Forty Thousand Eight Hundred Rupees Only SET

CO2 Manifold (2x3) along with tailpipe, NRV & fitting

382 1.00 40800 Forty Thousand Eight Hundred Rupees Only SET

600ml Ward Vacuum unit along with regulator Two Thousand Eight Hundred Fifty Rupees

Theatre Suction trolley

384 1.00 12500 Twelve Thousand Five Hundred Rupees Only Nos

Isolation Lockable line valves :15mm One Thousand Two Hundred Sixty Rupees

Isolation Lockable line valves : 22 mm One Thousand Nine Hundred Fifty Rupees

Isolation Lockable line valves :28 mm One Thousand Nine Hundred Fifty Rupees

Isolation Lockable line valves :42 mm

388 1.00 3500 Three Thousand Five Hundred Rupees Only NOS

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying Fowler bed should have Overall dimension: (L) 2138 x (W) 908 x (H) 559mmFunctions : Two function

bed with adjustable backrest 70deg and upper leg rest 24deg Head board and foot board : 25.4 mm dia 1.2 mm thick ss202

made tube with 18 mm thick PLT board.Bed frame : bed frame is made of MS ERW rectangular section tube of size

30mmx60mm of 1.6mm thick. . it has Provisionision 4 iv pole holders . It is strengthened by rectangular tube section of size

60mmx30 mm having 1.6 mm thicknessleg Under Structure : ERW round tubes used with thickness of 1.2mm with section

31.75 mm dia.Lying surface : Lying surface made of MS ERW of thickness of 1.0 mm thick . This lying surface have 4 sections

for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is

provisioned with Ratchet for leg rest adjustment. Mattress platform is strengthened by tubular frame of size 25.4mm dia x

1.2mm thickness. It is strengthened by trapezoidal contour ( rounded corner ) 16 nos, embossed cut out. All metal

components are pre treated with zinc phosphating and then powder coated with epoxy polyester powder coating.

Mechanism: All func ons are operated with lead screw mechanism, ACME threaded EN8 made 6mm pitch for easy in

389 4.00 38000.00 Thirty Eight Thousand Rupees Only No

movement.Castors : High endurance, metal castors of 125mm dia having Provisionision for diagonal locking with stem dia

22mm should be provisioned for better stability.Powder coating :Anti rust, thermosetting epoxy polyester powder coating

should be used. All powder coating is in Ral White.Maximum weight :Maximum safe working load is 135 kg.Handle : All the

functions are operated with the help of single ergonomically handle, which are made of metal inserted PP co polymer , it's

lever is snap locked when not in use. All the handles are Provided with operating guidance stickers.welding : To ensure quid

quality welding " Co2 Argon" process is adhered to.powder coating : All metal components are pre treated with zinc

phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .].packing : goods are supplied in

knocked down construction to reduce carbon emission. In house test report : proof loading test , cycle tests , impact test,

horizontal and vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board.The rate

shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying hospital locker. The bedside locker has single drawer and cabinet with lock and with plastic

molded handle. There is space between plastic top and the cabinet to keep the general items for the frequent use. Cabinet is

Provisionided with lock to keep the valuable items for the safety. overall dimensions should be 490mmW x 410mm D x

941mm H.Corner tube made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of CRCA sheet of

0.8 mm thick Provided with lock.( 470 mm x 410 mm x 382 mm).Top made of ABS of 2.2 mm thick. Top has recessed and

contoured shape for better aesthetic and usability.Plastic molded knob is Provisionided with Matt finish and dome shaped for

Eleven Thousand Nine Hundred One Rupees

390 4.00 better grip.Plastic molded castors with 50 mm dia placed in diagonal locking arrangement.RAL white, plastic parts in Grey.5 kg 11901.00 Nos

UDL on both the tops and 10 kg in the cabinet.All metal components are pre treated with zinc phosphating in 7 tank process

and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial

protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative].goods are

supplied in knocked down construction to reduce carbon emission. The rate shall include all materials, hardware, and labour

etc. complete as per instruction of engineer-in charge.

Providing and Supplying of IV pole of saline stand. Overall dimension should be 250 mm PCD with height adjustable from

mm to 1150 mm. it is fully SS made used on bed with telescopic rod for height adjustment. The bottom adapted is 12 mm dia,

fixed tube is 15.9 mm dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 mm dia ERW tube. there are 2 nos 6 mm dia hooks to Four Thousand Four Hundred Thirty Five

hand saline bags. Maximum load bearing capacity is 2kg per hook.The rate shall include all materials, hardware, and labour Rupees Only

etc. complete as per instruction of engineer-in charge.

Single Step stool is to be made of ERW square tube.Textured and Rubber mat is to be provided, of 20mm X 20mm size. Tube

1.2 mm thick and mat 3.0 mm thick Size:485(L) x 335 (W) X 210 (H) Step stool is to be made of MS square tubes, is to be strong

and firm. Top is to be made of textured rubber offering firm grip for climbing Frame:It should be made up of MS

19mmX19mm section of thickness 1.2 mm. Stool top:stool top should be made up of MS of thickness1.2mm. Rubber

mat:steps should be provided with rubber Mat which is made of natural rubber of thickness 3.2mm. Maximum

392 7.00 2500.00 Two Thousand Five Hundred Rupees Only Nos

weight:maximum safe work load should be 135 kg. welding:To ensure qood quality welding " Co2 Argon" process should be

adhered to. powder coating:All metal components should be pre treated with zinc phosphating in 9 tank process and then

powder coated with anti microbial epoxy polyester powder coating .packing:goods should be supplied in knocked down

construction to reduce carbon emission. In house test report proof:loading test , cycle tests , impact test. Certifications:

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying of Examination couch with full storage of Examination couch with full storage- Overall dimension

1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and BP

tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick

CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of

sheet metal and pin arrangement. The internal dimension of the two sidecabinets should be 422 mm (W) x 455 mm (D) x

mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet

unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C

shaped handle lever . The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double

extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H).

The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite Forty One Thousand Nine Hundred Rupees

cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test Only

report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There

should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made

step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP

aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should

be 135 kg. The examination couch should be provided with six numbers levelers made of metal and plastic for adjustment on

the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating.The rate

shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying of Examination couch with full storage of Examination couch with full storage- O overall dimension

of L 2065 X W 850 X H 850 mm. The backrest has ratchet mechanism for tilting the backrest. Leg frames and intermediate

frames should be made of ERW tubes having section of 30 x 30 square tubes with thickness of 1.6mm. Nylon 6 leg shoes is

given to avoid wear and tear. MS sheet metal lying surface of thickness 1.2mm is used. Top sheet metal panel base frame of

25 x 25 ERW square tubes of thickness 1.6mm is used. Ratchet is made of MS Strip with section 40 x 4 to Provision the backrest Twenty Six Thousand Six Hundred Rupees

tilt. The table is Provided with Leathrite calf rest which is adjusted on ss304 made lithotomy rod. The Rod and the calf rest is Only

ht adjustable and swivel to achieve desired position. The table is Provided with SS bowl stand to collect fluids and discharge

during procedure. Table is pre-treated and powder coated with epoxy powder coating. Safe working load is 135kg. The rate

shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying of round stool should have of round stool. Overall dimension should be Diagonal Leg Dia 538 mm

H470 min-655max. Top plate made of SS 304 made sheet with spin section of thickness 1mm and non corrosive. It has a

diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height

adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is

welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made One Thousand Five Hundred Fifty Rupees

up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round and clean look. All the Only

legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and

then powder coated with epoxy polyester powder coating . Safe working load is 135kg .The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

supplying and fixing s.s 304 laboratory stool for hospital used PSP-1037-SS Stool 14" Square stainless steel 18 gauge contoured

seat Stainless steel base with heel rest for added comfort Tubular legs fitted with rubber shoes pretreated and power

396 30.00 920.00 Nine Hundred Twenty Rupees Only No

coated. As directed by Engineer in charge etc

Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X 61OmmH .) Providing and Supplying a Ward Care Bed

Frame work of specially designed CRC rectangular heavy tube. machine pressed CRC sheet top with proper support. SS head

397 60.00 and foot bows with laminated panels. Four side saline arrangement location L.eg fitted with shoes. Pretreated and Powder 4500.00 Four Thousand Five Hundred Rupees Only Sqmt

coated. Selection as per Engineer-In-Charge etc. completed. ( As per Photo attached)

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying STRETCHER ON TROLLEY should have Strecher on trolley with Overall dimension should be 2005 mm

(L) x 666 mm (W) x 827 mm (H). It should be removable stretcher on trolley mointed on castors.. The trolley should be made of

31.75 mm and 25.5 mm dia 1.2 mm thick and 1.6 mm thick ERW tube. The casters should be 200 mm dia diagonal lockable

castors. stretcher understructure should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top should be made of 1.2 Thirty One Thousand Eight Hundred Thirty

mm thick CRCA sheet. The stretcher should have provision to mount IV pole at four corners. The product should be pre Four Rupees Only

treated and powder coated with Epoxy polyster powder coating.The maximum load bearing capacity should be 135 kg.The

rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying Foldable wheel chair should have Foldable wheel chair with Over all dimension should be (L) 790 x

(W) 600 x (H) 870mm Foldable frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross

bar should be made of A3 carbon steel with section 25.4 x 1.2mm.The Rear wheel should be made of 24 inch Solid mag wheels

with alloy in the rim .Integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon steel

with chrome finish. The front wheel should be of 8 inch HUB made of PA polymer and outer with solid rubber. PU molded arm

Sixteen Thousand Two Hundred Ninety

399 2.00 rest and base should be made of ABS for better arm support .There should be Leatherite strap for calf rest and leatherite 16290.00 No

cushion for seat. The foot rest should be Adjustable alluminimum die cast foot rest with updown and swivel type mechanism

and Push Handles should be made of moulded rubber grip to push the wheelchair. Hand brakes should be provided to lock the

wheelchair at desired location. The finsih of chair should be antirust chrome .The rate shall include all materials, hardware,

and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying Three-Fold partition screen should have Three-Fold partition screen- Overall dimension: L 2637 X W

640 x H 1720 MM. Frame should be made of ERW tube with movable plastic hinges. The fix frame should be made of 25.4 mm

dia 1.2 mm thich ERW tube, the movable frame shouuld be made of 19.05 mm dia 1.2 mm thich ERW tube and the leg frame

should be made of 30 mm suqare tube with 1.6 mm .thick. The fixed portion should be 1075 mm width and the movable

400 3.00 10073.00 Ten Thousand Seventy Three Rupees Only No

portion should be 778 mm width. 50 mm dia wheel castors should be provided. All MS parts should be pre treated and

powder coated with thermosetting epoxy polyester. Green color Casement fabric must be provided for modesty.The rate shall

include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying of OXYGEN CYLINDER TROLLEYshould have MS Oxygen cylinder trolley suitable for B type oxygen

cylinder. The overall dimension should be 410 mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of 25.4 mm

dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the cylinder position during transit.The trolley should Four Thousand Eight Hundred Fifty Six

be provided with 100 mm dia 25 mm thick PU wheel for longer durability. LDPE made leg bush should be provided on the legs. Rupees Only

Max load bearing capacity should be 50 kg.The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Providing and Supplying of Instrument trolley should have ISO 13485:2016 certificate from NABCB certified agency, CE

certificate from european notified body with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018

Certified and should be mandatorily submitted along with Bid. of Instrument trolley- SS 304 sheet should be provided at top

for the placement of the instruments being used and also for easy in portability. SS 304 sheet should be provided at the top

Twenty Two Thousand Eight Hundred Forty

402 4.00 as well as bottom shelf for keeping the instrument being used. Horizontal bars should be welded with legs so as to provide 22844.00 No

Four Rupees Only

protection at sides with supporting legs giving a sturdy look.Castors of 125mm Dia. should be used for easy in movement.

Overall Dimension: 775mm X 531mm X 915mm H. Maximum safe working load must be 40kg.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying of Medicine trolley should have Medicine trolley-Overall dimension: - 902(L) X 532(B) X 915(H)

mm. Top shelf and bottom shelf should be made of SS304 sheet with 1mm thickness and 1.2mm. Rest of the components

like supporting legs, horizontal bar handle should be made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors of

Twenty Three Thousand Nine Hundred

403 2.00 high quality plastic injected molded and anti static having the dia of 125mm should be used.Handles made of SS 304 pipe 23986.00 No

Eighty Six Rupees Only

having section of 16mm and thickness of 1.2mm should be used.The rate shall include all materials, hardware, and labour

etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying soil linen trolly should have I Soiled linen trolley with Overall dimension should be 625 mm dia and

955 mm height. The base frame should be made of 25 mm dia and 10 mm dia 1.6 mm thick ERW tube.It should be fitted on

404 3.00 mm dia castor.The bag should made of Casement fabric which should be wasable. Overall load bearing capacity should be 10 8076.00 Eight Thousand Seventy Six Rupees Only No

kg.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying mayo trolly should have Mayo trolley-overall sizes of Base rectangle 504mm X 655mm X Adjustable

from 814mm to 1340 mm. Height adjustment will be achieved with screw knob mechanism. Bottom frame should be made of

1.2mm thick SS 304 tube of dimension 38 x 38mm square tube. Top frame should be of 1.2mm thick and 304 SS grade

rectangular shape of dimension 30 x 30mm. Fixed tube of 3 mm thickness square in shape of 38 x 38mm telescopic tube

Ten Thousand Nine Hundred Eighty One

405 15.00 should be used of 2 mm thickness rectangular in shape of 30 x 30mm. Locking knob should be used ergonomically designed 10981.00 No

made of SS screw and nylon knob. Tray supporting frame should be of thickness of 1mm. Castors must be injection molded

type of 50mm dia having high endurance, anti-static properties. Safe working load must be 20kgs.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Supplying and installing Biomedical waste trolley of 60 Liter capacity of Best Plastic and approved brand and selected Twenty One Thousand Five Hundred Rupees

colour etc.(As per Photograph) Sintex of Equivalent.(Set of 3 Bucket) Only

Providing and Supplying crib should have Crib for infant should be made of wire mesh crib on ms trolley.Dimension Overall

size should be 892 mm (L) x 536 mm (W) x 1008 mm (H).The crib is of 16 mm and 5 mm dia 1.6 mm thick ERW tube. The mesh

is designed to accommodate the baby to Provide ventilation and visibility.The base frame is of 25.4 mm and 10 mm dia

mm thick ERW tube with 125 mm individual locking castor.The maximum load bearing capacity is 20 kg.All metal components Thirteen Thousand Seven Hundred Ten

are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .All Rupees Only

powder coated parts in RAL white.Maximum patient load is 20 kg.

packing goods are supplied in knocked down construction to reduce carbon emission. The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying PAEDIATRIC SHEET BED should have Overall dimensions should be (L) 1572 mm X 839 mm (W) x

1218 mm (H) till the bed surface Head and foot board are made of 15.8 and 31.75 mm dia 1.2 mm and 1.6 mm thick ERW

tube respectively.ERW round and rectangular tubes are used with thickness of 1.6 mm. Sleek base frame with large clear

space and ground clearance with long base structure provides greater stability.ERW round tubes should be used with

thickness of 1.6mm with section 32mm Lying surface is made of CRCA sheet with thickness of 1 mm and is powder coated

with anti microbial and anti rust coating. It consists of embossed holes to give more stability and load bearing capacity.The

Thirty One Thousand Seven Hundred Sixty

408 10.00 bed is Provisionided with drop down type full side rails which should made of 15.9 dia and 19 mm dia and 1.6 mm thick ERW 31768.00 No

Eight Rupees Only

tube.Nylon6 made Leg shoe is Provided for avoiding wear and tear Maximum safe working load is 135 kg.Mattress- Optional

All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester

powder coating ."1. All powder coated parts in RAL white.2. Other plastic parts in Pantone Cool Grey 8C.goods are supplied in

knocked down construction to reduce carbon emission. The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Providing and Supplying mattress should have Mattress with overall dimension should be (L)615mm*(W)315mm*(H)50mm

MATTRESS FOR CRIB ON BED and CRIB ON TROLLEY , mattress made of 40 density pu foam. The mattress have high end

409 60.00 heavy helium cover which is water resistant, x ray permeable, fire retardant.The rate shall include all materials, hardware, and 2011.00 Two Thousand Eleven Rupees Only No

labour etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying of Emergency Crash Cart should have Advanced emergency cart constructed of CRCA Powder

Coated MS Sheet of thickness 1.2mm. overall dimension of L 1037 W x 672 H x 1435 mm.

Should have 5 drawers with drawer configuration: 2 small (390(L)x600(W)X71(H)mm) + 2 medium (390(L)x600(W)X149(H)mm)

+ 1 Large (390(L)x600(W)X227(H)mm). all drawers should be lockable through central locking. Should have anti-tilt

mechanism. should have minimum five drawer with adjustable acrylic separators. Should have cam lock type central locking

mechanism for drawers Provided with 100 security seal tagsShould have following accesories items.defibrillator shelf with

monitor straps, sharps container – 2qty. oxygen cylinder holder, cardiac chest board made of compact laminate, push/pull

writing surface, utility tray, document holder, catheter holder., a waste bin discarding syringes and gloves.wire wounder and

mounting screws for spike guard.cart should have ABS vacuum formed top tray of thickness 3mm, Aluminum push handle of

dia. 25mm built into the end panel for smooth stable movement. Pullout writing surface top. cart should be light, sturdy, Sixty Two Thousand Three Hundred Forty

scratch and dent resistant. should have 4 TPE corner bumpers for collision protection, Single wheel front locking castors Seven Rupees Only

should have 125mm diameter to facilitate quiet and easy movement. ABS grade made top sheet with 3mm thickness should

be used. MS Cylinder case should be used with 2 Velcro straps to hold the cylinder with a foam padded base. SS 304 grade

pipe of section 16mm and thickness of 1.6mm should be used to to mount IV rod. High endurance anti-static, Aluminum

handle pipe should have section of 25mm with length of 365mm and should have thickness of 1mm giving a glossy finish.

Metal parts should be pre treated and powder coated with epoxy polyster pwder coat. Safe working load must be

55kgs.Optional accessory: Spike guard/Extension board.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Supplying of Dust bin of approved brand Sintex or equivalent (as per photographs) of 240 Liter Capacity

411 3.00 3600.00 Three Thousand Six Hundred Rupees Only No

Providing and Supplying storwel with Storwel plain with Gordian Lock shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of

0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These

components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle

412 6.00 and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall 8064.00 Eight Thousand Sixty Four Rupees Only Nos

have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.

The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving

options shall be available.The rate shall include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Providing and Supplying main table with ERU ..Supplying and placing in position Main Table with ERU of the following

specifications. Its size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height

(ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board

shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage Nineteen Thousand Two Hundred Seventy

units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels Rupees Only

made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To be provided with 5 Shelves. Blotless Rack made of

414 10.00 8500.00 Eight Thousand Five Hundred Rupees Only Nos

Providing and Supplying Leatherette chair office chair.SEAT/BACK ASSEMBLY: The seat and back should be made from

seasoned wood and plywood. The same should be upholstered with black synthetic leather and polyurethane foam.BACK

SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D).ARMREST TUBE: The armrest tube should be made of

2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE ASSEMBLY:

Four Thousand Eight Hundred Ten Rupees

415 10.00 The understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube 4810.00 Nos

and powder coated (DFT 40-60 microns).Overall Dimensions of Chair-Seat Height - 48.0 cm.Height - 87.5cm.Width and Depth

of Chair as measured from base - Width-58.0 cm and Depth-56.5 cm.The rate shall include all materials, hardware, and labour

etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplying Cushion back High Back Chair. SEAT/BACK ASSEMBLY:-The seat/back shall be made up of 1.2 ±0.1cm

thick hot pressed plywood measured. upholstered with fabric and moulded Polyurethane foam together with moulded seat

and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. Back size -50.0 cm (W) x

72.0 cm (H) . Seat Size-50.0 cm (W) x 46.5cm. (D). HIGH RESILIENCE(HR) POLYURETHANE FOAM: The HR Polyurethane foam

should be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf for 25 Percent compressionSEAT/BACK COVERS:The

seat cover shall be injection moulded in black co-polymer polypropylene and back cover should be vacuum formed from ABS

sheets.ARMRESTS: The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness

and reinforced with M.S. insert. The armrests shall be scratch and weather resistant tant. The armrests shall be fitted to the

seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel. CENTER TILT MECHANISM:The

Two Thousand Six Hundred Sixty Rupees

416 10.00 center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, Upright position 2660.00 Nos

locking, Tilt tension adjustment.PNEUMATIC HEIGHT ADJUSTMENT:The pneumatic height adjustment shall have an adjustment

stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow shall be 3 piece telescopic type and injection moulded in

black Polypropylene. PEDESTAL ASSEMBLY: The pedestal shall be injection moulded in black 33 Percent glass-filled Nylon-66

and fitted with 5 nos. twin wheel castors. Thepedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors) TWIN WHEEL

CASTORS;The twin wheel castors shall be injection moulded in Black Nylon.Overall Dimensions of Chair-Seat Height - min

to max 54.2cm.Height - min103.3 to max 115.3cm.Width and Depth of Chair as measured from pedestal - Width-76.3 cm and

Depth-76.3 cm.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in

Providing and Placing WHITE BOARD (2500mm X 1000mm) (Display board for writing / projections) Providing and installing

magnetic matt finish resin coated ceramic white board of approved make with G. I. Sheet backing filled with honey combing

Five Thousand Eight Hundred Fifty Rupees

417 10.00 material and proper arrangement for hanging an wall with full length tray at bottom for duster and marker person. Hooks to 5850.00 Nos

be provided on top for hanging charts, maps etc. (Please refer annexure for approved

make / manufacturer)

Providing and Placing Notice board having 9mm soft board as a core materail 1mm laminate sheet as back materail and

surface of 1.mm felt cloths, having profile of heavy alumnuim fluted anodized profile 10 to 12 micron of 18 to 25 thick board C

channel and corner is made uo of molded virgin ABS grey colour hanging vertical and horizontal hanginh facilty as per selected

418 3.00 2700.00 Two Thousand Seven Hundred Rupees Only Nos

colour and size including all necesaary fixture , faster, fitting, labour material machinary etc complete as selected and

directed by engineer insharge. Approved make: scholar/pearl/alkonsign/elora -Notice Board size 900mm x 1200mm Overall

Supplying and Placing Slotted shoe Rack : 900 W X 300 D X750 H mm. To be provided with 4 Shelves with SS 304 grade Two Thousand Two Hundred Fifty Rupees

supporting legs, horizontal bar is made of SS 304 pipe having dia 31.8, 25 mm respectively. Only

420 30.00 Providing and Placing of Dust bin of approved brand Sintex or equivalent (as per photographs)of 5 Liter Capacity 720.00 Seven Hundred Twenty Rupees Only Nos

Providing and Placing Photo with Frame, Size : 600 X 400 Providing and Fixing Photo Frame made of Teakwood Border Patti of

size 25x25 with melamine polish finish with 3 mm glass and inside the picture on Photo paper with high resolution picture

421 4.00 2000.00 Two Thousand Rupees Only Nos

quality and sticked on MDF as selected by engineer-in-charge including all necessary fixture, fasteners,labour , material etc

Providing and Placing Ajanta Make : Wall Clock Provinding and fixing Ajanta make wall clock of the desired shape and design as

422 6.00 531.00 Five Hundred Thirty One Rupees Only Nos

selected by engineer in charge Ajanta Wall Clock

Providing and Placing Acrylic Worktop Providing and Arranging arylic work top with 10mm clear imported Acrylic sheet with

423 6.00 two brass rods with height adjustable of overall size 580 mm x 400 mm etc complete as diretced by engineer 5500.00 Five Thousand Five Hundred Rupees Only Nos

incharge.Approved Make: scholar/pearl/alkonsign/elora Acrylic Worktop

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Placing Partitions are generally structured by Aluminum extruded sections.All panels are in standard size and

ready to assemble condition.All exterior metal surfaces are POWDER COATED FINISH .12 mm thk. Pre laminated or laminated

panel on both the side of the partition. It has provision for all utility management and to mount worktops, etc., All joineries

are free from Nailing, Screwing and adhesives. .All components are removable without any damage and designed to

reconstruct, reorient or reconfiguration layout very easily.Entire systems are free from maintenance like refinishing anti pest

treatments or refitting, lifetime.It has inherent Sound and thermal insulation properties. All panels are twin layered and very

proper sealing in joint are provided to ensure these properties. System is designed in such a manner that resizing of structure

and related mountings can be carried out at site easily, if required. It is Eco-Friendly in true sense. Partition Skeleton Main

Vertical Section : Aluminum extruded section having overall size of 73 mm x 29 mm having wall thk. 1.50 mm with provision

to connect to outer vertical closing section at all side. Main Horizontal section : Aluminum extruded section having overall size

73 mm x 29 mm having wall thk. 1.50 mm with provision to connect with each other at side to supporting panels of 12 mm Five Thousand One Hundred Forty Three

thk. on the both sides of partition. Electric trench box section : Aluminum extruded section having over all size 60 mm x 80 mm Rupees Only

having wall thk. 1.40 mm with snap fitting arrangment. Connecting pole section : Aluminum extruded section having overall

size 99.60 x 99.60 box section having wall thk. 1.40 mm and provision to connect with all type of connections. ( i.e. " L " , " T "

and " PLUS connectivity ). Verticle and Horizontal covring seal section : Aluminum extruded section having over all size

x 8.40 mm having wall thk. 1.20 and provision to cover all open sides with snap fitting. Double Glass Section : Aluminum

extruded section having over all size 56.0 mm x 9.70 mm having wall thk. 1.20 mm and provision to hold 5 mm thk. Glass with

cushioned rubber for every side of glass on both the sides of the panel. Solid filler panels: Solid panel made out of 12.00 mm

thk. laminated / pre laminated board of particle or MDF or PLY on both side of the partition. Glass filler panels : having 5 mm

thk. Clear toughened Glass on both sides of the partition.

Supplying and placing of Mattress Size 1900L x 840W x 100H Foam Density : 40 +- 2 kg/m3 Hardness in kg : 45+-2 as per

Three Thousand Six Hundred Sixty Seven

425 6.00 IS:7888 for 25 Percent compression Stitched upholstery cover material Helium Heavy A/F F/R SM Colour – Navy Blue, (350 3667.00 Nos

GSM,0.45 thk) with fire retardant and antimicrobial properties. Bed Matt 100mm thick..

Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated regular MS ERW tube having 8.0+/-0.03 cm x

+/- .03 cm x 0.2 +/-0.014 cm size. Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back

Eleven Thousand Four Hundred Seventy Five

426 15.00 Shell to be peforated made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side 11475.00 No

Bar is made of chrome Plate solid steel 3.0 cm +/- 0.03cm x1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be

assembled on the cross beam with help of M8 Bolts.

Providing and Supplying office table of the following specifications. Its size shall be 1200 Width x 600 Depth x 740 Height .

The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all

around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick

PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for

levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed

427 6.00 7060.00 Seven Thousand Sixty Rupees Only No

with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board

with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are

provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer

slides are of Hettich.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in

Providing and Supplying office table of the following specifications Its size shall be 1500 Width x 750 Depth x 740 Height .

The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all

around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick

PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for

levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed

428 2.00 with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board 7800.00 Seven Thousand Eight Hundred Rupees Only No

with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are

provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer

slides are of Hettich.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in

Supplying and Stacking of Tubular Section Cardiac table with Stainless Steel grade 304 of frame of work mounted on four 50 Four Thousand Six Hundred Seventy Five

mm Castors.etc.(As per Photograph) Rupees Only

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Supplying and Stacking of Tubular section of Stainless steel storage Rack of size 1200mm(width) X 600mm (Depth) and Nine Thousand One Hundred Thirty Rupees

1800mm height frame of 304 grade steel.etc. Only

Providing and Placing inquiry counter with Worksurface of size W - 3665 X D 1060 X H 750 Worksurface and 1350 counter

made of - Decorative Laminate Particle board 25mm thick. Inside radius 700.0 mm outside radius – 1350.0 mm Depth –

mm. Rubberized cork – 18mm thick. should have Glass Frosted of10mm thick Diamond cut finishing on edges. Inside Radius –

Sixty One Thousand Two Hundred Rupees

431 1.00 1202.5mm Outside radius – 1402.5mm Depth – 200mm *Note: Angle sustained within arc surface is 60 deg.Understructure 61200.00 No

should have Modesty Panel MS Perforated sheet Below Worksurface : 0.8 mm (thick) x 665.0mm (height) x 1345.0 mm (flat

length) Above Worksurface : 0.8mm (Thick) x 260 mm (height) x 1345.0 mm (flat length). Legs MS tube 1.6 mm thick Diameter

50.8 mm Height 604 mm.

Providing and Supplying of Stool Mch Ht Adj + back Hi Base. 1) SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm

thick flat plywood and with moulded Polyurethane foam and should be .upholstered with replaceable synthetic leather

covers.SEAT SIZE: Diameter 40.0 cm ADJUSTMENTS: 360° Revolving type 2) BACK. ASSEMBLY: The back foam should be

designed with contoured Lumbar support for extra comfort. The upholstery should be available in synthetic leather. *BACK

SIZE: 45.0 cm (W) covered with polyurethane foam 3)HIGH RESILIENCE (HR) POLYURETHANE. AM:The_HR.polyurethane foam

should be _moulded with density Equal 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25 Percent compression4)HEIGHT

ADJUSTMENT: The manual height adjustment should be very easy to operate with a help of a knob.. It can be easily locked at

432 6.00 the most comfortable position. 5)PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 ± 0.02 cm :thick 3500.00 Three Thousand Five Hundred Rupees Only No

HR sheet.( should be :. DD 1079 / HR ), powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black

Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal-should be 55.0±0.5cm pitch-circle-diameter- (65.0±-

1,0cm-with-castors).-Circular-foot-ring of 052.0±0.2cm made up of 01.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot

support in High-base stool. 6)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon.

Width- 65.0cm, Depth- 65.0 cm, Height- 88.0cm to 99.5cm Seat Height- 67.0 to 78.5cm. The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying High Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed

plywood measured.The Back is made up of injection mou1ded glass filled nylon and upholstered using Mesh fabric with high

tenacity yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and

hardness 16 ± 2 kgf as per IS:7888 for 25 Percent compression.ARMRESTS : The adjustable armrest is designed with the

following features :• Up-Down adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest structure which is Powder

Coated and fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY:

The Lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The

Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an

adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with Twelve Thousand One Hundred Seventy One

433 4.00 the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring 12171.00 No

more comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC

HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.Pedestal Assembly : the

pedestal is injection moulded in black 30 Percent glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch

center dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. NECKREST :

The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam and covered with polyester fabric

Neckrest is fixed to Back Assembly through Neckrest connector Neckrest assembly has height adjustment of4.2 ± 0.5 cm and

rotation adjustment of overall76°+ 2°. The complete neckrest assembly is retro fit to the main chair.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Item Estimated But According to

Item of Works Unit

No. may Be More Estimated

In Figures Rs.Ps. In Words

Or Less Quantites Rs.Ps.

Providing and Supplyin .Mid Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection mou1ded glass filled nylon and upholstered using Mesh fabric with high tenacity

yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D).* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE