WBMAD/ULB/TNAA/NIT-17e/2025-26

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety /Chandil Variety

125 mm brick work with 1st classbricks in cement morter ( 1:4) in ground floor.

Supplying and laying polythine sheet ( 150 gm/sq.m ) over dampproof course or beloe flooring or roof terracing or foundation or foundation trenches.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

Brick work with 1st class bricks in cement mortar (1:4) (b) superstructure groung floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 20 mm thick plaster

Neat cement punning about 1.5 mm thick in wall ,dado, window sills, floors etc . Note cement 0.152 m3/100 m2

Supplying and laying chequered tiles of any shede and of approved quality with (1:1.5:3) cement concrete laied in pannels or patterns as directed in pavement ,footpath etc including necessary underlay 25 mm thick (avg)cement morter (1:3) complete in all respect with all labour and materials. ( Using cement slurry @4.4kg/sq.m at back side and @2.4 kg/sq.m for joint filling ).

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Decorative Textured (Martt Finish) or Smooth Finish Acrylic exterior emulsion paint including scraping and prepairing the surface thoroughly , complete as per manufacturer's specification and as per direction of the EIC in Ground Floor (b) two coats.

Protective and Decorative Acrylic Exterior emulsion paint of approved quality, as per manufacturer's specification and as per dirction of EIC to be applied overf Acrylic primer as required. The rate includes cost of materials, labour, scaffolding and all incedental charges but excluding the cost of primer in ground floor (two coats)(a) normal acrylic emulsion.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : with super glosss (hi gloss) (b) On steel or other metal surface : (iv) Two coats (with any shade except white)

Supplying and planting of different plants / trees (supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads and lifts, carriage, handling, manuring applying pesticide and fertilizer etc. i) Furcaria Veriegated 10 to 12 leaves in height 20-30 cm in earthen pot of size 25 cm

Supply &installation of Dolphin type waste bin Capacity 125 Lt, Fast Quality Frp made. Frp thickness 4mm pu paint with Hardener. Cover area 52inch x 48 inch.

Supply& installation OF TWO SEATER SWING OF 3 inch round Ms GI pipe pipe thikness 2.5mm with GalvaniseChain, 2no FRP Made Seat Length 22 inch, Wide 11 inch. Pu colour &Hardneer . Cover Area 10 feet x 10 feet.

Supply& installation OF Metco Merry Go Round for Capacity of 4 children. Main gi Pipe 3inch & outer gi pipe 1inch round, thickness 2.5mm, platform fast quality frp , 5feet dia, 5 feet. pu paint with Hardner. Cover area 8feet dia.

VISHALA Cast Iron Powder Coating Garden Bench, Capacity 3 Seater VISHALA(VGB-03), Product Each id: 5116877-60399337452, Country Of origin: India, Local Content (Mll): 95%, Sold by: OEM OEM verifi ed catalogue, Seating Capacity: 3 Seater, StandLegs Design Decorative, Finsh : Powder Coating, Back Rest:With, Arm Rest: With, Warranty: 3 year, Weight Bearing Capacity: 90 Side Frame Material: Cast Seat Material: Mild Steel Pipe 14 Gauge, Back Rest Material: Mild Steel Pipe 14 Gauge, Total Height: 870 millimeter, Seat Height: 450 millimeter, Width: 550 millimeter, Total Area Required: 1550 millimeter

Supply and installation of Circular Swing of Capacity 4 child, Area 8 feet x 8 feet 50 mm dia TATA pibe thik 2.5 mm FRP made Seat With PU paint with hardner.

SUPPLY AND INSTALLATION OF LEG EXTENSION OF Height 84 inch, wide 66 inch. Main GI pipe 4inch outer pipe DIA 1 inch round. Thickness 2.5mm. Pu paint with hardner , cover area 10feet x 8feet.

Add GST @18%

Please Enable Macros to View BoQ information