Re-Development of Community centre at Khaniyara, Dharamshala S/H - Civil works, sanitary and plumbing works etc.

Amount

Providing and laying cement concrete 1:3:6(1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in: Foundation and plinthincluding carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing fixing bright Stainless Steel tower bolts of size 250x10mm (barrel type) with screws etc. complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing fixing 125 mm long Stainless Steel D-handle for doors/windows with screws etc. complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing fixing 600 mm long Stainless Steel Pull Handle for glass doors including all accessories required complete all as per drawing and manufacturer specifications. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built-up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint:-In grating, Framed guards, bars,ledders railings, brackets & similar works. including carriage of material in all leads and lift and direction of Engineer-in-charge.

15mm Cement plaster with Cement Mortar 1:6 (1Cement:6 Sand) in single coat on the rough side of brick/ concrete/stone walls for interior/ exterior plastering up to any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. including carriage of material in all leads and lift and direction of Engineer-in-charge.

6mm Cement plaster to ceiling:-In Cement mortar 1:3(1 Cement:3 Sand) complete all as drawing and technical specification and as directed by Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying priming with cement primer coat on new concrete / masonry / asbestos cement / plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with :-Ready mixed Cement primer including carriage of material in all leads and lift and direction of Engineer-in-charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/ plastered wall surfaces to give an even shade including t thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the foreign matter including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in 600x600mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying antiskid ceramic floor tiles of 8-10mm.thick laid on a bed of 12mm. thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement. colour and size as per direction of Engineer-in-charge

Providing and fixing digital HD Ceramic wall tiles of 6 mm thick with 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry. colour and size as per direction of Engineer-in-charge

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing woodwork in frames of doors,windows, clerestory, windows and other frames wrought,framed and fixed in position including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 40mm thick 2nd Class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows with 5mm thick glass including SS butt hinges with necessary screws, cost of Glass will be paid & measured seperately with including carriage of material up to all leads and lifts and approved as per direction of Engineer incharge.

Providing and fixing glazing glass panes of 5.0 mm thickness (weight not less than 13.75kg/sqm). in wooden/ uPVC/aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-Charge. (Frame work shall be paid seperately) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing wire gauge, 2nd class deodar wood shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying two coats of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting including carriage of material up to all leads and lifts and as per direction of Engineer In Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming including carriage of material up to all leads and lifts and as per direction of Engineer In Charge.

Painting two coats (excluding priming coat) on new wood and wood based surface with white enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material up to all leads and lifts and as per direction of Engineer In Charge.

Polishing two coats with French polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of material in all leads and lift and direction of Engineer-in-charge.

WATER SUPPLY AND SANITARY INSTALATION Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to any level, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, any lead :-Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing high pressure PVC Spigot and Socket, waste and ventilating pipe ISI Marked including fixing with approved adhesive complete.

PVC Pipe 150 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

PVC Pipe 110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

PVC Pipe 75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC Plain bend ISI Marked including fixing with approved adhesive complete :-

PVC Plain bend 110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

PVC Plain bend 75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete :-

PVC Door bend 110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

PVC Door bend 75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC floor trap ISI Marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floor etc. complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC Single Equal Branch with oval access door, ISI Marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete

110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC Collar ISI Marked including fixing with approved adhesive complete :-

150 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing PVC Clamps ISI Marked of approved design with steel screw and rawal plug etc. Complete :-

110 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

75 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing square-mouth PVC gully trap complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: including carriage of material in all leads and lift and direction of Engineer-in-charge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing white vitreous China extended wall mounting water closet of size 790x370x690 mm of approved shape including providing & fixing white vitreous China cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing white vitreous China flat back small stall urinal of size 26.5 x 31.5 x 44 cm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Range of three half small urinals with 10 litre P.V.C. automatic flushing cistern including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube up to 1.25 mtr. long PVC Flexible tube & ABS wall hook to extended wall mounted type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing Oval Shape wash basin on R.C.C Slab, including 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, and making good the walls wherever require:-White Vitreous China oval shape Wash basin size 540x410 mm with 15 mm C.P. brass pillar taps including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing P.V.C. Flexible pipe waste pipe for sink or wash basin including:-P.V.C. waste fittings complete.:- 32 mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge:-32 mm nominal outer dia Pipes including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge:-50 mm nominal outer dia Pipes including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall:-25 mm nominal outer dia Pipes including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 20 mm Nominal Outer dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge:- Concealed work, including cutting chases and making good the walls etc. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing unplasticized PVC connection pipe with brass unions : 45 cm Long including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :600x20mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws :- including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

32 mm nominal bore including carriage of material in all leads and lift and direction of Engineer-in-charge.

25 mm nominal bore including carriage of material in all leads and lift and direction of Engineer-in-charge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing URINAL PARTITION of size 1195x550mm with 12mm thick laminated panel including all Stainless steel accessories required for fitting this panel and complete all as per drawing and technical specification and as directed by Engineer-in-charge. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Vakil Singh Govt Contractor